Hackaday Links: October 3, 2012

October 3, 2012 by Mike Szczys 15 Comments

Cheap ergonomic mouse

If your had keeps cramping while using the computer mouse why not grab a hunk of wood and a couple of buttons to make your own ergonomic input device?

C# GUI for Arduino testing

Here’s a Windows GUI for controlling Arduino. [Rohit] put it together using C#. It should make development very simple as you have control of almost everything before you need to worry about writing your own server-side software.

Networked strip lighting replaces the office overheads

[Jeremy] got tired of replacing the halogen bulbs in his office. He upgraded to ten meters of RGB LED strips. We can’t think they do as well at lighting up the room. But he did add network control so they can flash or change colors depending on what type of alert they’re signalling.

Woven QR codes

Now that [Andrew Kieran] proved you can weave a working QR code into textiles do you think we’ll see garments that have a QR code leading to care instructions? We could never figure out what all those strange icons stood for.

World’s largest QR code in a corn maze

The world’s largest QR code was cut out of this field of corn. It’s at the Kraay Family Farm in Alberta, Canada. Gizomodo called it “Stupidly Pointless”. But we figure if it got them a world record and put their website on the front page of Giz and Hackaday they’re doing okay. Plus, we whipped out our Android and it read the QR code quite easily.

Hackaday Links: September 21, 2012

September 21, 2012 by Brian Benchoff 31 Comments

And then Obi-wan said, “you were supposed to be the chosen one!”

Yesterday, a little bird told us Makerbot will be moving to a closed source model for their newest printer. This was confirmed, and now [Zach Smith] a.k.a. [Hoeken] – creator of the RepRap Research Foundation and co-founder of Makerboth Industries is weighing in with his take on the situation.

Hey! Free stuff!

Remember that DIP28 ARM chip with BASIC? Remember how I told you Coridium will be giving a few hundred away as samples? Yeah, that’s happening now.

Replacing a scroll wheel with titanium

[Rhett] has been using a Logitech mouse for a few years now. Recently the scroll wheel became corroded, so [Rhett] replaced it with a titanium version. The perfect match for the trusty battle axe, theIBM Model M keyboard.

Web-based IDE for the Raspi

[Phil Torrone] sent in a video of something he and [ladyada] are working on. It’s a web-based IDE for the Raspberry Pi. We’ll do a full review of this when it’s released.

Intro to software defined radio

So you have one of those TV tuner dongles and want to get in to software defined radio. Where do you start? [Al Williams] over at Dr. Dobbs has a great introduction to SDR, and gives a few pointers that should help you get that cool looking waterfall plot very quickly. Thanks for sending this in, [Chris].

Hackaday Links: Sept 15, 2012

September 15, 2012 by Brian Benchoff 13 Comments

Very tiny keyboard

The idea behind the iControlPad2 is pretty simple – just take the slide-out keyboard from a phone, discard the phone part, add two analog sticks and a D-pad, and put Bluetooth in it. It makes for a very small keyboard perfect for controlling a Raspi, a home media server, or even a phone or tablet. I think it’s cool, anyway.

I mustache you a question. Where’s the Hawaiian Shirt?

At her local hackerspace, [Akki] heard someone pronouncing Raspberry Pi as, “Raspberry pee eye.” Of course this joke needed to be taken to its fullest absurdity, so [Akki] gave her Raspi a [Tom Selleck] mustache. Slightly better than the Googly Eyes Arduino shield.

Not giving a Flip about proprietary batteries

When powering a Flip video camera, [Dan] had two choices: regular AA batteries, or a proprietary battery rechargeable through the USB port. When the rechargeable battery is inserted, it closes a small switch telling the Flip it can recharge these batteries. Wanting to put his own rechargeable batteries in his camera, [Dan] closed the switch with a little bit of cardboard, thus allowing him to use his own NiMH rechargeable batteries.

Building operating systems from scratch

A while ago we posting something about a Cambridge professor putting up a tutorial for developing an operating system from scratch on the Raspberry Pi. [Joey] decided to follow these tutorials and has a blog dedicated to his adventures in OS development. It’s not a custom UNIX-inspired OS yet….

Put a quarter in, get a goldfish

[Yooder] over on Reddit spent a week turning a gumball machine into a fish tank. A very nice build that is now home to a few neon tetras. Check out the imgur album for a full build walkthrough.

Hackaday Links: September 11, 2012

September 11, 2012 by Mike Szczys 12 Comments

Xbee sensors at Lowe’s?

Lowe’s, the home improvement big box store, is selling some home automation items which might be Xbee compatible. They’re being sold under the brand name Iris. There is some debate as to whether they’re Xbee, or just 802.15.4 hardware. Either way they might be worth checking out for your wireless projects.

Father sword replica from Conan the Barbarian

Sometimes its just fun to watch the master at work. In this case it’s a blacksmith replicating the sword from Conan the Barbarian. [via Reddit]

LG washing machine that phones home

LG has built an interesting troubleshooting feature into some of their washing machines. This video shows the encoded audio it will output if you use the right button combination. You’re supposed to hold your phone up to the machine while talking to customer service and they’ll be able to get some type of debugging information from the dial-up modem type of sounds. If you end up decoding this audio we want to know about it! [Thanks Pedro]

MicroSD card adapter for Raspberry Pi

[TopHatHacker] was surprised to see a full-sized SD card slot on the Raspberry Pi. His temporary solution to get his microSD card working was to uses a miniSD adapter. He cut away the case and bent the pins until they lined up with the microSD card.

Batman’s cowl for retro motorcycle enthusiasts

Okay, we think this Batman cowl in the style of 1950’s motorcycle garb is pretty cool. Just realize that if you’re seen wearing this you will be thought of as one of the crazy guys in town. [via BoingBoing]

Hackaday Links: September 7, 2012

September 7, 2012 by Brian Benchoff 17 Comments

MakerSlide, European edition

We’re all familiar with the MakerSlide, right? The linear bearing system that has been turned into everything from motorized camera mounts to 3D printers is apparently very hard to source in Europe. A few folks from the ShapeOko forum have teamed up to produce the MakerSlide in the UK. They’re running a crowdsourced project on Ulule, and the prices for the rewards seem very reasonable; €65/£73 for enough extrusion, v-wheels, and spacers to make an awesome CNC router.

Kerf bending and math

A few days ago, I made an offhand remark asking for an engineering analysis of kerf bending. [Patrick Fenner] of the Liverpool hackerspace DoES already had a blog post covering this, and goes over the theory, equations, and practical examples of bending acrylic with a laser cutter. Thanks for finding this [Adrian].

276 hours well spent

[Dave Langkamp] got his hands on a Makerbot Replicator, one thing led to another, and now he has a 1/6 scale model electric car made nearly entirely out of 3D printed parts. No, the batteries don’t hold a charge, and the motor doesn’t have any metal in it, but we’ve got to admire the dedication that went in to this project.

It was thiiiiiiis big

If you’ve ever tried to demonstrate the size of an object with a photograph, you’ve probably placed a coin of other standard object in the frame. Here’s something a little more useful created by [Phil]. His International Object Sizing Tool is the size of a credit card, has inch and cm markings, as well as pictures of a US quarter, a British pound coin, and a one Euro coin. If you want to print one-off for yourself, here’s the PDF.

Want some documentation on your TV tuner SDR?

The full documentation for the E4000/RTL2832U chipset found in those USB TV tuner dongles is up on reddit. Even though these chips are now out of production (if you haven’t bought a proper tuner dongle yet, you might want to…), maybe a someone looking to replicate this really cool device will find it useful.

Lazy Labor Day Educational Time. Watch Cornell’s Microcontroller Courses.

September 2, 2012 by Caleb Kraft 13 Comments

C’mon, you know you’re not really going to do much today. You might as well spend that time learning some skills instead of watching funny cats. The Cornell ECE lectures on microcontrollers (ECE 4760 and ECE5760), taught by [Bruce Land], are available online for free.

Not only do you get to enjoy these two courses, but there are videos available showing off several different categories of student projects as well.

Continue reading “Lazy Labor Day Educational Time. Watch Cornell’s Microcontroller Courses.” →

Hackaday Links August 23, 2012

August 23, 2012 by Jeremy Cook 8 Comments

PS3 Controller Cell Phone Mount

Although the details of this build are quite scarce, not much is needed considering all that this cell phone/PS3 controller “mount” is made of is 3 binder clips and a few rubber bands. A very ingenious solution.

Overengineered Throwie

On the other end of the spectrum, I’ve spent way too much time overengineering the throwie (eventually it ended up using a ping-pong ball). Be sure to watch the first video at 0:32 for an impressive horizontal placement, or check out the baloon throwies at the end of the post for even more fun!

Chinese Noodle Slicing Robot

This robot may be appropriately engineered in function, but the form of this noodle-slicer has a distinctly Asian style. We think it may have been designed as a prop for a Godzilla movie originally.

2D Glasses

3D glasses may have been all the rage in 2009, but it’s 2012 so you may want to get your hands on a pair of 2D glasses. These instructions will tell you how to make glasses to convert a 3D film into 2D if the third dimension annoys you or makes you dizzy. Thx [Brian] and [Victor]!

As seen in this post from the Bacteria forum, the test box originally featured at [HAD] has now been updated to include variable regulators, volt meters and an LED tester. Check it out on it’s source, [Downing’s Basement]. Thx [Mike]!

Hackaday

Hackaday links

785 Articles

Hackaday Links: October 3, 2012