Neon Light Christmas Tree

gpugh_topshoptree081

Everyone always complains about the Christmas season coming earlier and earlier, but we think when we can have Christmas trees like the one pictured above, it’s not such a bad thing. Created by English fashion designer [Gareth Pugh], the tree features sixty white neon tubes, and is supported by a freestanding metal rod. It reminds us of the light sabers in Star Wars, which is probably why we like it so much. The tree is just a carrier for the decorations anyway, right? You can check out the tree in person at the TOPSHOP in Oxford Circus, London.

Dean Kamen’s Stirling Engine Car

kamen_car

[Dean Kamen]’s company, the people behind the Segway, have created a hybrid car that uses a Stirling engine instead of a standard internal combustion engine. Stirling engines are closed cycle, meaning heat is applied to the outside of the cylinder walls. They are generally more efficient than standard car engines, but haven’t been used much outside of industrial applications. We suspect that the drivetrain arrangement is similar to the Chevy Volt where the engine is used to charge batteries which are in turn driving an electric motor. This is different from modern hybrids that can have either electric motor or gas engine driving the wheels. The article is unfortunately full of classic [Kamen] hyperbole and minimal detail. He calls the Stirling engine “an insurance policy” for the electric car since it can recharge the battery. That’s right, folks. If you run out of juice, you can put gas in the car. I doubt many Prius owners will fall out of their chair over that. Being a Stirling engine, we’d be more impressed if you could charge the thing by rubbing warm toast on it.

[via Make]

TIME’s Best Inventions Of 2008

tesla

Attempting to put our past behind us as quickly as possible, TIME has released what they feel are the best inventions of 2008. While there’s some pretty wishy-washy lab-only stuff on the list, we’re glad to see a lot of cool hardware made the cut. Some of our favorites are: The Tesla roadster proving electric cars can be fun. IBM breaking the petaflop barrier with LANL’s Roadrunner. The Large Hadron Collider for getting everyone scared about physics all over again. Have a look at the list for many other tech highlights from this year.

New WPA TKIP Attack

wifibox

[Martin Beck] and [Erik Tews] have just released a paper covering an improved attack against WEP and a brand new attack against WPA(PDF). For the WEP half, they offer a nice overview of attacks up to this point and the optimizations they made to reduce the number of packets needed to approximately 25K. The only serious threat to WPA so far has been the coWPAtty dictionary attack. This new attack lets you decrypt the last 12 bytes of a WPA packet’s plaintext and then generate arbitrary packets to send to the client. While it doesn’t recover the WPA key, the attacker is still able to send packets directly to the machine they’re attacking and could potentially read back the response via an outbound connection to the internet.

[photo: niallkennedy]

[via SANS]

Business Card AVR Board Updated

bcard

Evil Mad Scientist Laboratories has updated their business card AVR breakout boards to version 1.1. We suspect the changes will probably make them even more popular. The boards are designed for the ATmegaXX8 family of microcontrollers. The center has all 28 pins labeled while either end has a prototyping area. An in-system programming header is also provided. For the new version, both prototyping areas have been increased to accommodate DIP14 packages. The holes for the microcontroller are now larger so that they can hold a ZIF socket. Finally, the power and ground traces have been expanded. We’ve always like the versatility of these boards, as demonstrated in the Tennis for Two project, and can’t help wondering if these updates were made to facilitate another project.

Design For Manufacture

sparkfun

SparkFun has posted an excellent guide to the many different issues you could run into when you finally decide to get a circuit board professionally produced. We assume that most of you aren’t running a professional design firm and will appreciate these tips gleaned from years of experience. They provided a rule list, Eagle DRC, and CAM file to help you get it right the first time. The end goal is designing a board that won’t be prone to manufacturing errors. The tutorial starts by covering trace width and spacing. They recommend avoiding anything less than 10mil traces with 10mil spacing. For planes, they increase the isolation to 12mil to avoid the planes pouring onto a trace. They also talk about annular rings, tenting, labeling, and generating the appropriate gerber and drill files. SparkFun isn’t completely infallible though, and manages to produce a coaster from time to time.

SparkFun naturally followed up this strict tutorial with a guide to unorthodox header hole placement. If you want to learn more about Eagle, have a look at [Ian]’s overview of Eagle 5 and Ruin & Wesen’s layout videos.

Acidmods Custom FPS Controller

fpsutil3

Yet another custom X Box controller has come out of the acidmods foundry. This one, specialized for FPS games opts for two analog sticks up front, and complete removal of the D pad and buttons. They break down the process quite nicely with very detailed pictures of how to modify the case and move the analog stick.  Check out the video of it in action after the break.

Continue reading “Acidmods Custom FPS Controller” →