News

3729 Articles

3D Printer Uses Office Paper

November 6, 2008 by 41 Comments

3dhouse
Mcor Technologies recently launched a brand new rapid prototyping machine. The Mcor Matrix forgoes the standard of expensive and rare build materials by using A4 office paper. The machine selectively deposits glue on the sheet of paper: more glue on the cross-section, less on the waste. It then uses a blade to cut out the part profile. The vertical resolution is determined by the paper thickness. You can use either 20lb paper, which has a thickness of .1mm, or 40lb, which is twice as thick, so it will build twice as fast. The final part can be sanded and painted like wood. The idea is similar to LOM, but those machines require specialized paper. It’s nice to see a company intentionally target a low cost of ownership. If they had used a laser though, you’d only have to worry about sourcing the glue. Machine and material prices have yet to be announced.

[via Fabbaloo]

Official Arduino Ethernet Shield

November 6, 2008 by 16 Comments

ethernetshield
Arduino has just released an official ethernet shield. It’s based on the same WizNet W5100 chip that was used in the tiny ethernet board we covered earlier. The W5100 handles the full IP stack and can do TCP or UDP with four simultaneous sockets. The board has a power indicator plus six LEDs to debug the connection. It works with the standard ethernet library. The reset button resets the shield and the Arduino. The SD adapter is not currently supported by the Arduino software.

Design Robots To Hunt Humans

November 6, 2008 by 38 Comments

gladiator_240g

The Department of Defense wants you to design a pack of robots that would hunt humans. Or, as they put it, “search for and detect a non-cooperative human subject”. While the project brings to mind Terminators, there are also non-terrifying uses for these robots, including search and rescue missions. The robots should be about 100 kilograms or less, provide immediate feedback, and defer to a human operator in the event of a difficult decision. This project presents some interesting challenges for robot designers. They’ll need to consider several key issues, like robot cooperation and decision-making abilities. We knew it was only a matter of time before the DoD turned the Grand Challenge into Death Race.

[via Warren Ellis]

Arduino Wireless Rotating POV

November 5, 2008 by 4 Comments

[youtube=http://www.youtube.com/watch?v=7QMV4mRVpo4]

got an old cdrom and an Arduino laying around? Why not make it into a spinning POV display. It was built using parts from a floppy drive and a cdrom, as well as an Arduino and a small wireless transceiver. Using an IR sensor to detect rotations, the Arduino sends data to the LEDs. The wireless is used when sending new messages to the device. The link is in Spanish, so here’s the Google Translation.

[via Hacked Gadgets]

LCD That Scans Fingerprints

November 5, 2008 by 10 Comments

auo_uv

AU Optronics Corp has unveiled a new LCD panel that doubles as a fingerprint scanner. Each pixel is equipped with 4 optical sensors, so a 320×240 screen would have a scanning resolution of 640×480. They have also experimented with different sensors, such as UV. You can see an LCD panel that detects and displays the UV index above. Why did they use a secondary display to show the data though?

[via Gearlog]

Multi-Color Fog Spreader

November 4, 2008 by 5 Comments

fog_spraed

Though we’re pretty sure this was meant for Halloween, we think it would be a perfect addition to your election night party. [marc92] shows us how he built a fog spreader with red or blue lighting. Fog machines generally spit out the fog from a single point, relying on the breeze to spread it around. [marc92] wanted it spread a little more evenly, as well as some nice mood lighting. He built a pipe system that would emit fog from a much larger area. Mounted on the pipe are red and blue LEDs.  Mix this with some of the election lighting systems and you’re set for a party. We know this is an extremely simple project, so it should give you plenty of time to get out and vote before the polls close.