Tool Hacks

3031 Articles

How To Build A Pocket-Sized MBed Signal Generator

September 15, 2015 by 13 Comments

Last month, I talked about how to get started with mBed and ARM processors using a very inexpensive development board. I wanted to revisit mBed, though, and show something with a little more substance. In particular, I often have a need for a simple and portable waveform generator. It doesn’t have to be too fancy or meet the same specs as some of the lab gear I have, but it should be easy to carry, power off USB, and work by itself when required.

My requirements mean I needed a slightly more capable board. In particular, I picked up a K64F board. This is very similar to the KL25Z board but has a bit more of everything–speed, memory, etc. What I really wanted, though, was the SD card slot. I did, however, do my early testing on a KL25Z, so if you have one, you can still work through the code, although standalone operation won’t be possible. The price jumps from $13 to $35, but you get a lot more capability for the price.

Continue reading “How To Build A Pocket-Sized MBed Signal Generator” →

Surface Mount Soldering Workshop Shares Secrets Of CM

September 12, 2015 by 19 Comments

Friday afternoon I had the pleasure of sitting in on a surface mount soldering workshop. I’ve done some surface mount soldering before and am quite adept with a soldering iron, but this focused on solder paste and a hot air pencil. [Bob Cogeshall] ran the workshop and went beyond the most basic information. His experience founding Small Batch Assembly, a contract manufacturer whose offices are in the Nova Labs hackerspace, has led him to learn a lot of tricks of the trade.

Continue reading “Surface Mount Soldering Workshop Shares Secrets Of CM” →

Resistance Is… There’s An Augmented Reality App For That!

September 12, 2015 by 68 Comments

Like many engineers of a certain age I learned the resistor color code using a mnemonic device that is so politically incorrect, only Tosh might venture to utter it in public today. When teaching kids, I have to resort to the old Radio Shack standby: Big Boys Race Our Young Girls But Violet Generally Wins. Doesn’t really roll off the tongue or beg to be remembered. Maybe: Bad Beer Rots Our Young Guts But Vodka Goes Well. But again, when teaching kids that’s probably not ideal either.

Maybe you can forget all those old memory crutches. For one thing, the world’s going surface mount and color coded resistors are becoming a thing of the past. However, if you really need to read the color code, there’s at least three apps on the Google Play Store that try to do the job. The latest one is ScanR, although there is also Resistor Scanner and Resistor Scan. If you use an iPhone, you might try this app, although not being an Apple guy, I can’t give you my feedback on that one.

Continue reading “Resistance Is… There’s An Augmented Reality App For That!” →

Microwaving Things Outside Of The Microwave!

September 11, 2015 by 48 Comments

DISCLAIMER: DO NOT TRY THIS AT HOME!

Ever wonder what would happen if you took a magnetron out of a microwave, strapped it to a stick, and pointed it at random everyday objects? Well, lucky for you a couple young Russians recorded their research before they presumably hurt themselves and were hospitalized, or maybe just became infertile — or caused cataracts — point is don’t do it.

They’ve taken a magnetron out of a microwave, and tied a soup can to the side of it to focus the microwaves. After discovering this, they did the next logical step — point it at various things and see what happens.

In this specific video (they have lots…) you can see them create plasma inside light bulbs, melt light bulbs, light up vacuum tubes, fluorescent bulbs, liquefy metal, and even catch a glimpse of radio waves.

Continue reading “Microwaving Things Outside Of The Microwave!” →

ARM Programming On Mars

September 10, 2015 by 39 Comments

Before you overreact to the title, keep in mind the latest version of Eclipse is code named “Mars.” It is always a bit of a challenge to set up a generic ARM tool chain. If you don’t mind sticking to one vendor, shelling out a lot of money, or using Web-based tools, then you might not have this problem. But getting all the tools together can be annoying, at best.

[Erich Styger] works with students and knows they often stumble on just this step so he’s provided clear documentation for getting Eclipse, the ARM gcc compiler, and a full set of tools installed. He focuses on Windows and the Kinetis platform, but the steps are virtually the same regardless. Just get the right tools for your operating system and skip the Kinetis-specific parts if you don’t need them.

Continue reading “ARM Programming On Mars” →

Phone Scope Build Uses Old Optical Drive

September 10, 2015 by 13 Comments

It is hardly news that you can use your smart phone as a really crummy oscilloscope. You can even use it as an audio frequency signal generator. There are also plenty of projects that allow you to buffer signals going in and out of your phone to make these apps more useful and protect your phone’s circuitry to some degree. What caught our eye with [loboat’s] phone oscilloscope project was its construction.

Continue reading “Phone Scope Build Uses Old Optical Drive” →

Aerogel Insulation For 3D Printers

September 9, 2015 by 8 Comments

A heated bed is nearly essential for printing with ABS. Without it, it is difficult to keep parts from warping as the plastic cools. However, heating up a large print bed is difficult and time consuming. It is true that the printer easily heats the hot end to 200C or higher and the bed’s temperature is only half of that. However, the hot end is a small insulated spot and the bed is a large flat surface. It takes a lot of power and time to heat the bed up and keep the temperature stable.

We’ve used cork and even Reflectix with pretty good results. However, [Bill Gertz] wasn’t getting the performance he wanted from conventional material, so he got a piece of aerogel and used it as insulation. Aerogel material is a gel where a gas replaces the liquid part of the gel. Due to the Knudsen effect, the insulating properties of an aerogel may be greater than the gas it contains.

Continue reading “Aerogel Insulation For 3D Printers” →