Make Your RC Car Drive Itself With This Simple Brain Swap

April 4, 2012 by Mike Nathan 13 Comments

arduino-rc-conversion

If the kids have lost interest in that RC car or truck you bought them over the holidays, [Randy Sarafan] from Instructables has a few ideas that might help make the toys fun again, while teaching your kids a bit about electronics in the process. In his writeup, he shows how to swap out the brains of your run of the mill RC truck, enabling it to do far more than was originally intended. The procedure is pretty simple, and something that you can easily involve your kids in, if you’d like.

He uses an Arduino and a motor shield to keep the conversion simple, but this can be done with just about any capable microcontroller you might have on hand. [Randy] added a Parallax Ping sensor to the front of the truck enabling it to avoid objects as it drives itself, but since he cut out the truck’s original control board we’re assuming that there’s no way to override the truck’s actions at present.

[Randy] calls the conversion a “robot” though it seems like more of a semi-autonomous rover if you ask us. Regardless, revamping an old RC car is certainly far better than letting it collect dust on a shelf, or worse, tossing it out during spring cleaning.

Continue reading to see a short video of [Randy’s] RC truck in action.

[via HackedGadgets]

Continue reading “Make Your RC Car Drive Itself With This Simple Brain Swap” →

Board Games Over IP Means Telepresence Chess

April 4, 2012 by Brian Benchoff 19 Comments

Correspondence chess, or playing a game of chess via email or snail mail, is well-known in the chess community. [FunGowRightNow] thought he could bring correspondence chess into the 21st century, so he built two robotic chess boards that communicate over the Internet. The end result makes for an awesome senior project for school.

Instead of a simple monitor displaying the other player’s moves (and having to manually move both black and white pieces), the positions of all the pieces are controlled via ~~a laptop~~ an Arduino underneath each board. An electromagnet mounted on an xy frame moves one piece at a time. To detect the positions of the pieces, an 8×8 grid of reed switches open and close with magnets put in the base of each piece. The end result is a nearly seamless chess game that can be played by two people separated by hundreds of miles.

Right now, all we have are a few videos and the descriptions of the inner machinations of the chessbots. [FunGow] promised the Internet design specs after he turns this in as his senior project on April 10th. Until then, you can enjoy a few of the videos he’s posted after the break.

via reddit

Continue reading “Board Games Over IP Means Telepresence Chess” →

Auto-locking Pet Door Ensures That Your Outdoor Kitty Obeys Its Curfew

April 4, 2012 by Mike Nathan 26 Comments

If you’ve got a pet that roams freely in and out of your house, you may find yourself wanting to more closely regulate how they come and go. [tareker] was looking to keep his cat indoors at night when dangerous animals might be lurking in the neighborhood, but he didn’t want it to become a hassle.

He already had locking pet door on hand, which he hacked to regulate the egress and ingress of his cat automatically. He installed a pair of reed switches to determine if the door had been opened outwards (cat leaving) or inwards (cat returning), keeping track of the state using an Arduino Nano. A servo motor attached to the door’s frame locks the door whenever it detects the cat is safely inside after nightfall.

While he also added an RGB LED to reflect the status of the door, he’s considering connecting it to the Internet so that he can control and check the door from wherever he might be at the moment.

Recorder Controlled Snake Game Played On A Nokia 6110

April 3, 2012 by Mike Szczys 7 Comments

Dig out an old cell phone, hit the dollar store for some plastic recorders, and build this sound controlled snake game for your next party. The project will be a snap for those comfortable working with microcontrollers, and a great learning experience if you’re looking to try your first Arduino project.

[László] and his friend call the project the Snake Charmer. As shown in the clip after the jump it uses music notes to direct the path of the solid line in the classic cellphone game of snake. But this isn’t just some PC-based rip-off. They’re playing on the actual cellphone. A camera points at the screen to project it for the enjoyment of spectators. The control scheme uses relays soldered to the pads of the four directional buttons. The pitches are being detected by a Max/MSP program, with the corresponding commands pushed to the Arduino via USB. Yep, it’s overkill but the point was to get this up and running quickly and with a minimum of work. We’d say they succeeded.

Actually, now that we think of it, this isn’t a two player game. Perhaps the recorder control concept needs to be applied to a more modern version of the game.

Continue reading “Recorder Controlled Snake Game Played On A Nokia 6110” →

DrummerBot Joins The Jam Session When Your Bandmates Are Busy

April 3, 2012 by Mike Nathan 10 Comments

drummerbot

It seems that more often than not, [Steffest] finds himself inspired to rock out on his guitar without a percussion section to back him up. Like any enterprising hacker/musician would be wont to do, he built a robotic drummer to join in when he got the urge to play.

His DrummerBot is driven using an Arduino, which is tasked with controlling the 8 servo motors that the bot has at its disposal. The bot’s drum set is composed of a variety of items from fan motors to pot lids and more. [Steffest] wanted the ability to produce the maximum variety of sounds possible, so most of the servo motors are driven in two directions allowing the bot to strike more than one item with each “arm”.

[Steffest] is a big fan of interfacing physical objects with a web interface, so he built a simple HTML based sequencer that allows him to program the robot from his phone. Once the sequencer is programmed, the DrummerBot can be launched into action with the simple press of a button.

[Steffest] says that the bot works pretty well, but the sound is a bit raw if you hear it live. A little Ableton Live post-processing goes a long way to smooth things out however, as you can see in the video below.

[Thanks, Wesley]

Continue reading “DrummerBot Joins The Jam Session When Your Bandmates Are Busy” →

Open Source Tracking System Gets A Kickstarter

April 2, 2012 by Mike Nathan 19 Comments

Many of the hacks featured here inspire others to build on the creator’s work, and on occasion the positive feedback brings the hack to market. Last year we told you about [Wayne’s] creation, a system aimed at tracking down would-be game console thieves. He received a bunch of requests to document the tracker in full, so he decided to revise his creation and release it as Open Source Hardware.

As you might remember, his original tracking device was powered by an Arduino, which monitored an accelerometer and GPS sensor, reporting coordinates and movements to his mobile phone on demand. He combined the disparate components together on a single board, and started a Kickstarter for the project.

Aside from his original purpose of tracking stolen goods, he lists off an array of other uses, such as tracking the driving habits of your newly licensed teen, geofencing objects in certain areas and more.

If an SMS controlled all-in-one tracking system is something you might be interested in, check out his Kickstarter, or take a look at the documentation and build one of your own.

Loudest Telepresence Robot Ever

March 30, 2012 by Mike Szczys 9 Comments

This telepresence robot will never let your Skype callers sneak up on you. [Priit] built the project, which he calls Skype Got Legs, so that his distant friends could follow him around the house during chats. But as you can hear after the break, the electric drills used to motorize the base are extremely loud.

Noise pollution aside, we like the roughness of the hack. It’s utilitarian but seems to work quite well. Commands are sent via the web using a combination of Ajax and PHP function calls. The two drills are controlled by an Arduino via a couple of automotive relays. The drills are powered by their original rechargeable battery packs. So as not to alter those batteries, [Priit] figured out a way to use synthetic wine bottle corks as a connector. They’ve been cut to size, and had tinned wires pushed through holes in them. Now, when he inserts the altered corks they press the wires against the battery contacts. Continue reading “Loudest Telepresence Robot Ever” →