Hacking Digital Scales For The Disabled

December 18, 2013 by Marsh 4 Comments

analphabeticscale

[Jan] works with both physically and mentally disabled individuals, some of whom cannot read, making many of their tasks more difficult. Although [Jan] is not in a position to teach reading or writing skills, he was able to build an add-on device for the scales used in repackaging sweets to provide simple feedback that the user can interpret.

The device has three LEDs—red, green, and yellow—to indicate the package does not weigh enough (red), weighs too much (yellow), or lies within an acceptable range (green). The industrial scales at [Jan’s] workplace each have a serial output to connect to a printer, which he used to send data to the device. An ATMega8 controls the lights and an attached LCD, with the usual trimpot to change the display’s contrast and a rotary encoder to adjust the device’s settings. Everything fits snugly into a custom-made frosted acrylic enclosure, laser-cut at a local hackerspace.

[Jan] provides a rigorous guide to approaching each step on his Instructables page, along with source code and several pictures. See a video overview below, then enjoy another scale hack: building one from scratch.

Continue reading “Hacking Digital Scales For The Disabled” →

3D Printed Kindle Page Turner

September 25, 2013 by Marsh 7 Comments

kindlePageTurner

The slim page turn buttons on a Kindle may serve as an elegant, out-of-the-way design for a generation raised with and saturated by technology. For older folks and the disabled, however, those buttons can be a pain. [XenonJohn] fired up his 3D printer to find a solution, building this Kindle page turner. The Kindle slides in from the top while two flappy paddles offer a larger, unmissable target to replace the usual thin page-turn buttons. [XenonJohn] designed the levers to function with only a light touch, and included “bump stops” underneath the levers to absorb excess force from any harsh, accidental smacks.

Construction is simple and straightforward: print pieces, clean pieces, put pieces together. The levers attach via 3D printed hinges, which [XenonJohn] glued to keep in place. The relevant 3D files are available at the link above, and stick around after the break for a quick video of the paddles flipping some pages. [XenonJohn] is no stranger to Hackaday; take a look at his Google Glass alternative, “Beady-i.” Also check out the Frankenkindle, one of the inspirations for [XenonJohn’s] project which required a much more invasive process for getting at the page turning buttons.

Continue reading “3D Printed Kindle Page Turner” →

Building An IR Mouse Interface For The Disabled

June 26, 2013 by Caleb Kraft 9 Comments

[Chris Young] has a physical disability that means he can’t use a mouse very well. He typically uses Dragon Naturally Speaking for moving his mouse using voice commands but has found that it lacks some features he needs and can crash at times.

His solution to this problem was to create a device that will translate IR signals from a simple remote into mouse actions and movements. He is using an Arduino micro for this task, and as you can see in the video it seems to have worked out well for him. He has code and schematics available on his site if you would like to recreate this yourself.

[Chris] has actually built several accessibility devices for himself and others. You should check out his blog for more, including his thoughts on the cost of commercial accessibility equipment vs DIY. If you think you would like to try making a device to help someone with a physical disability access a computer, hop on over to thecontrollerproject.com and join up on the forums.

via thecontrollerproject.com

A Smartphone Dock For Your Arm? Why Not?

October 27, 2011 by Jeremy Cook 20 Comments

Why not that is, if you have a prosthetic arm. Although it’s hard to believe we haven’t seen this before, [Trevor Prideaux], according to [The Telegraph’s] article, “has become the world’s first ever patient to have a smartphone docking system built into his prosthetic arm.”

[Trevor] was born without a forearm, and, as he puts it, he’s used to adapting to things. However, he thought others might be struggling with the same problem, especially those that become disabled later in life. Once their help was secured, Nokia and the Exeter Mobility Centre got to work on his new limb and produced a prototype in five weeks!

[Trevor] is quite pleased with his new phone docking system. Texting especially is much easier and safer, and the phone can be removed when needed for making calls. We love to see hacks like this where people enhance their abilities using technology! For another hack helping those with disabilities, check out this wheelchair elevator/winch made for a non-accessible apartment.

via [reghardware.com]

Space Tech Helps Athlete Attain World Record

October 4, 2008 by Kimberly Lau 9 Comments

German athlete [Wojtek Czyz] set a new world record for the long jump at the Paralympics 2008 in Beijing, with the aid of his space tech enhanced prosthetic leg. He jumped a record 6.5 meters, 27 centimeters more than the previous record. Prior to switching to his new prosthetic leg for athletic competitions, he was prone to breaking the prosthesis when he performed to the best of his abilities. [Czyz] and his trainer met with ESA’s Technology Transfer Programme (TTP) technology broker MST Aerospace to assess the most important parts of the prosthesis. According to [Dr. Werner Dupont], MST Aerospace Managing Director, the crucial element was the connection angle, or L-bracket. Working with German company ISATEC, they developed a new L-bracket using a much lighter and stronger material from the Alpha Magnetic Spectrometer (AMS), which is an instrument that will be installed on the ISS to study extraterrestrial matter. We find it interesting and pretty cool that space technology can help enhance a disabled athlete’s performance, and think that this could lead to interesting possibilities, even for those who aren’t athletes.

[via Boing Boing]

Tongue Drive System Turns Mouth Into Virtual Keyboard

August 25, 2008 by Kimberly Lau 11 Comments

Researchers at Georgia Tech are working on a Tongue Drive System, which transforms the tongue into a tool that can manipulate computers and manage appliances and wheelchairs. This project has huge implications for the disabled, especially for those with few motor skills and limited movement. Many disabled Americans are paralyzed from the neck down, and this system could be a literal lifesaver, providing them with a method of communication and control over their own lives. Scientists have been attracted to the tongue’s potential for a long time. It provides several advantages over using other organs or appendages. It’s very sensitive, tactile, is not connected to the spinal cord, and does not usually end up being harmed in accidents. By placing a tiny magnet underneath the tongue, it’s transformed into a virtual keyboard. Sensors placed in the cheek track the magnet’s movement and processes the commands into directions for electronics, be it a wheelchair or a home appliance. We’re excited to see where this will go.

One Handed Xbox Controller

December 3, 2006 by Will O'Brien 18 Comments

I’m going to have to poke Ben to tell me about these things when he finishes them. He’s released his one handed xbox controller. This one was built by request of a veteran of Iraq. He re-designed the layout and re-positioned the entire right half of the controls to make the controls available to a one handed user.