Electric Bubblegum Board

October 20, 2014 by Marsh 17 Comments

The Mini Maker Faire in Atlanta was packed with exciting builds and devices, but [Andrew’s] Electric Bubblegum Boards stood out from the rest, winning the Editor’s Choice Award. His boards first emerged on Endless Sphere earlier this summer, with the goal of hitting all the usual e-skateboard offerings of speed, range, and weight while dramatically cutting the cost of materials.

At just over 12 pounds, the boards are lightweight and fairly compact, but have enough LiFePO4’s fitted to the bottom to carry a rider 10 miles on a single charge. A Wii Nunchuck controls throttle, cruise control, and a “boost” setting for bursts of speed. The best feature of this e-skateboard, however, is the use of 3D-printed parts. The ABS components not only help facilitate the prototyping process, but also permit a range of customization options. Riders can reprint parts as necessary, or if they want to just change things up.

[Andrew’s] board is nearing the 11th hour over at his Kickstarter page, so swing by to see a production video made for potential backers, or stick around after the break for some quick progress and demo videos.

Continue reading “Electric Bubblegum Board” →

THP Semifinalist: The Medicycle

September 1, 2014 by Brian Benchoff 50 Comments

Despite a seeming lack of transportation projects for The Hackaday Prize, there are a few that made it through the great culling and into the semifinalist round. [Nick], [XenonJohn], and [DaveW]’s project is the Medicycle. It’s a vehicle that will turn heads for sure, but the guys have better things in mind than looking cool on the road. He thinks this two-tire unicycle will be useful in dispatching EMTs and other first responders, weaving in and out of traffic to get where they’re needed quickly.

First things first. The one-wheeled motorcycle actually works. It’s basically the same as a self-balancing scooter; the rider leans forward to go forward, leans back to break, and the two tires help with steering. It’s all electronic, powered by a 450W motor. It can dash around alleys, parking lots, and even gravel roadways.

The medi~ part of this cycle comes from a mobile triage unit tucked under the nose of the bike. There are sensors for measuring blood pressure and oxygen, heart rate, and ECG. This data is sent to the Medicycle rider via a monocular display tucked into the helmet and relayed via a 3G module to a physician offsite.

Whether the Medicycle will be useful to medics remains to be seen, but the guys have created an interesting means of transportation that is at least as cool as a jet ski. That’s impressive, and the total build cost of this bike itself is pretty low.

Video of the Medicycle in action below.

The project featured in this post is a semifinalist in The Hackaday Prize.
Continue reading “THP Semifinalist: The Medicycle” →

Electric Longboard Roundup

August 12, 2014 by Marsh 21 Comments

ev longboards everywhere!

Everybody and their grandmother is longboarding electric-style these days: here are some of the most recent developments in the world of kickless cruising.

First up, [comsa42] has punched up an excellent step-by-step visual guide for first-time EV hopefuls, detailing the basics of a battery-powered longboard setup and thoroughly explaining the particulars behind component choices. His build is relatively straightforward: combine a board with a low(ish) kV outrunner motor, some LiPo batteries, an ESC (Electronic Speed Controller), a transmitter/receiver, and a few custom parts for gearing and mounting. This build should be commended not only for its simplicity but also for its frugality: [comsa42] estimates a final cost of around only $300, which is a staggering difference from commercial alternatives such as the Boosted Board and newcomer Marbel.

[comsa42’s] other significant contribution is a low-key and low-cost cover to house the electronics. He simply fiberglassed a small enclosure to protect the expensive internals, then mounted and painted it to blend seamlessly with the rest of the deck. You can find loads of other useful goodies in his guide, including CAD files for the motor mounts and for the wheel assembly.

But wait, there’s more! Stick around after the jump for a few other builds that ditch traditional wheels in favor of a smoother alternative. There’s also a smattering of videos, including comsa42’s] guide overview and some excellent cruising footage of the other board builds doing what they do best.

Continue reading “Electric Longboard Roundup” →

Mini Go Kart Built In A Day

February 27, 2014 by Brian Benchoff 19 Comments

kart

The crew at the MIT student-run shop MITERS love their go karts, and when sitting around a pile of parts in the middle of the night on Saturday, there was only one thing to do: build a mini electric go kart in a day.

The parts for this were all taken from the jumble of parts lying around the shop: a few scooter wheels, some aluminum tubing, a 1×4″ piece of extrusion, a huge motor, and a ton of A123 cells were enough to ge tthe project started. They began by bolting the back wheel and motor to the aluminum extrusion and machining a simple steering mechanism.

The real fun began when they realized they could fill the aluminum extrusion with batteries, creating a 6S5P pack with the balance connectors and – after a few tries – the proper insulation. Combine all the parts with a Kelly motor controller and an old Brooks saddle, and the MITERS have a fairly light mini go kart that can cruise around the halls at about 15mph. Not much, but it was built in a single sleep-deprived night.

Video of the kart in action below.

Continue reading “Mini Go Kart Built In A Day” →

Fail Of The Week: Commute-Shortening Electric Scooter

November 21, 2013 by Mike Szczys 38 Comments

Please don’t judge [Alan] on his choice of vests. This project is from 1999 when it was common to see people rockin’ these threads. Anyone who has ever spent time on the University of Minnesota campus in Minneapolis, Minnesota will know that parking is at a premium. [Alan] had a 12-15 minute walk from his parking garage to his office and was considering a cheaper parking location that would balloon that to 20-25 minutes. But engineers don’t see problems, they see project ideas. He started work on a tiny electric scooter that could slim down his commute. Obviously he did find some success, but it was interspersed with failures that make his scooter the Fail of the Week.

Continue reading “Fail Of The Week: Commute-Shortening Electric Scooter” →

[Charles’s] Epic “Total-Recap” GoKart Post

October 27, 2013 by Marsh 11 Comments

charlesEVPost

If you’ve built an electric vehicle in the past few years, you probably owe [Charles] a couple of beers. Now you can feel more indebted to him after you read his 17,500-word, 10-part post covering everything you need to know about electric go-kart design. You’ll want to grab a sandwich to keep you company.

You probably recall the Chibikart from posts earlier this summer, which is one of an endless list of EV projects [Charles] has up his sleeve. He’s been teaching MIT students how to build EV karts for a while now, and this total-recap “2.00gokart” novel is [Charles’s] way of sharing the wealth. This is more than a simple how-to guide, though. Instead, it reads like a teacher’s edition of GoKarting 101, with a few brief and important histories, walk-throughs of how the class evolved, exhaustive links to vendors, graphs, videos, and plenty of reference and documentation.

If you have even the slightest interest in electric vehicles, do yourself a favor and give it a browse. There are a couple of videos after the break, and if you need some more motivation, check out the EV skateboard that uses a lot of the same parts.

Continue reading “[Charles’s] Epic “Total-Recap” GoKart Post” →

Electric Bicycle Hack Is Hilariously Simple

October 8, 2013 by Marsh 40 Comments

Necessity may be the mother of invention, but limited resources give birth to some of the best hacks. [joejoeboom’s] 5-minute electric bike conversion probably can’t drive you into the next town, but it can scoot you around your neighborhood.

[jojoeboom] found a cordless drill at a local hardware store for $15, which he simply zip-tied to the bicycle’s frame. He positioned the drill so the chuck pressed firmly against the side of the bicycle’s rear wheel, creating a simple friction drive system. To create a throttle, [joejoeboom] strapped a spare hand brake to the handlebar and wrapped the brake’s cable around the drill’s trigger. Several carefully placed zip ties hold everything in place and allow the cable to tug at the trigger when the hand brake is squeezed.

Watch the bike poking around in a video below, and for some extreme contrast check out the 102-mph bicycle build from earlier this summer.

Continue reading “Electric Bicycle Hack Is Hilariously Simple” →