Year: 2012

All Aluminum Longboard Shows Its Mettle

April 17, 2012 by 12 Comments

Reddit user [davvik] made an album to show off his custom all aluminum longboard.  The whole setup weighs about 12lbs, which is not exactly light for a board.  In spite of the added weight [davvik] comments that it is actually pretty responsive. The design is not uncommon but seems to have opted out of the speed holes in favor of structural rigidity, and frankly we love it.

We might not risk wearing sandals on the thing, but [davvik] says for the most part the whole setup has the feel of a wooden longboard, and the added weight makes it fun downhill.  Future plans for the board include machining out the ends, we think this would be a great opportunity for some DIY anodizing!

[via Reddit]

A New And Improved Magnetic Cello

April 17, 2012 by 9 Comments

Over the past few months, [Magnetovore] has been working on his magnetic cell project. It’s a very interesting instrument that seems right out of the electronic music explosion of the 1970s. Now, he’s ready to share his invention with the world, and we wouldn’t be surprised if we see this instrument being picked up by a few avant-garde musicians in the next few years.

Last September, we were introduced to [Magnetovore]’s magnetic cello. The original version used four ribbon sensors for each of the strings and had completely analog electronics, leaving us wondering why this cello wasn’t invented in the 70s. The new version of the cello keeps the analog electronics that sound remarkably like a real acoustic cello, but does away with three of the ribbon sensors. Now the cello has a single ribbon sensor being used as all four strings – to change which string is played, the musician just has to press a button on the ‘bow’.

There is a drawback to using only one ribbon sensor; it’s now impossible to play two strings simultaneously as on an acoustic cello. The electronics in [Magnetovore]’s original magnetic cello were monophonic anyway, so we’ll chalk this design change-up to reducing component cost.

After the break, you can check out a trio of very talented cellists playing [Magnetovore]’s magnetic cello. There’s the classic Pokemon Center theme, the Mario Bros. theme, as well a Bach minuet and a crazy improvisation showing off what the magnetic cello can do.

Continue reading “A New And Improved Magnetic Cello” →

Neosporin…the Retrobright For Bench Equipment?

April 17, 2012 by 31 Comments

polishing-knobs

[linux-works] picked up an old power supply from eBay, and as it was built back in the 60’s or 70’s, it was in need of a little TLC. One thing that immediately caught his eye was the condition of the knobs, dials, and banana plug receptacles – they were dull and faded, showing off 40+ years of heavy usage.

He started off by simply removing the knobs from the power supply, giving them a thorough cleaning with soapy water before leaving them to air dry. They didn’t look any better afterward, so he decided to take a different approach and apply some triple antibiotic ointment to the knobs. As it turns out, letting the ointment sit for a few minutes then wiping the knobs with a soft cloth really made them shine, as you can see in the image above. [linux-works] attributes the effect to the white petrolatum base of the product rather than the antibiotics, likely making a wide array of products equally suitable for the job.

We know how well Retr0bright has worked for the vintage computer folks, so we’ll be interested to see how long the effects of the triple antibiotic treatment last. It certainly can’t hurt those readers who spend their time perusing flea markets in search of classic electronic equipment.

Communicating From Anywhere With A SPOT Connect

April 17, 2012 by 11 Comments

[Nate] over at Sparkfun put up a great tutorial for using the SPOT personal satellite communicator with just about any microcontroller. These personal satellite transmitters were originally intended to pair with the bluetooth module of a smart phone, allowing you to send a short 41-character message from anywhere in the world. Now, you can use these neat little boxes for getting data from remote sensors, or even telemetry from a weather balloon.

[Nate]’s teardown expands on [natrium42/a>] and [Travis Goodspeed]’s efforts in reverse-engineering the SPOT satellite communicator. The hardware works with the Globalstar satellite constellation only for uplink use. That is, you can’t send stuff to a remote device with a SPOT. After poking around the circuitry of the original, first-edition SPOT, [Nate] pulled out a much cheaper SPOT Connect from his bag of tricks. Like the previous hacks, tying into the bluetooth TX/RX lines granted [Nate] full access to broadcast anything he wants to a satellite sitting in orbit.

We’ve seen the SPOT satellite messaging service put to use in a high altitude balloon over the wilds of northern California where it proved to be a very reliable, if expensive, means of data collection. Sometimes, though, XBees and terrestrial radio just aren’t good enough, and you need a satellite solution.

The SPOT satellite service has an enormous coverage area, seen in the title pic of this post. The only major landmasses not covered are eastern and southern Africa, India, and the southern tip of South America. If anyone out there wants to build a transatlantic UAV, SPOT, and [Nate]’s awesome tutorial, are the tools to use.

Tip ‘o the hat to [MS3FGX] for sending this one in.

The MessagePad; A Thoroughly Hacked Macbook Turned Tablet

April 16, 2012 by 19 Comments

hacked macbook

Remember the times before the iPad existed? When a tablet PC was actually a full computer in a tablet form factor? Yeah, those days we were all so very optimistic about the future of tablet computing. Don’t think we don’t appreciate the new amazing toys that we’ve got around with the plethora of tablets to choose from, but we still dream of fully functional tablet computers.

[Brian] wrote in to show us his build of a fully featured tablet macbook conversion dubbed the MessagePad. Though we’ve seen a wide selection of home spun tablets before, this one has an impressive list of added features. It boasts both front and rear facing cameras, an SSD drive, a built in Teensy, and a line-in. It doesn’t matter if you believe in the dream of a full blown pc in tablet format, or if your preference would have been a Windows or Linux machine. You’ll surely love the bevy of photos he took along the way as he was hacking and slashing on this thing.

Flea Market Finds

April 16, 2012 by 47 Comments

We sometimes wonder why do don’t see classic electronic equipment at second-hand stores. We had thought it’s because these items tend to get snapped up quickly, but perhaps we’re not shopping in the right places. Here’s a photo set documenting some of the finds from a recent flea market.

The offerings cover a wide range of products and components. There are all kinds of bench tools like oscilloscopes, voltage meters, and bench supplies. But we also see more modern computer parts like cardboard boxes full of motherboards, and heaps of PC power bus wires. You can get five tube sockets for a buck and if you need the tubes they’re just $3-5 a piece. One of the more useful finds is a display case full of shrink tube of every diameter; and one vendor is selling wire by the foot.

License plates and common sense place this Flea Market in the Silicon Valley area. But if you’ve got more concrete info on where this type of event goes down please share it in the comments section.

[via Adafruit]

Shocking Use Of Ice Cube Trays

April 16, 2012 by 13 Comments

Looks like ice-cube trays are once again proving their versatility as this one is serving as the vessel for a home made lead-acid battery. With a collection of uniformly sized non-conductive containers, it makes the perfect base for a set of small cells. This project is the culmination of a Hackerspace class about batteries, and was put together to turn theoretical knowledge into a hands-on lab.

This is a captured image from the low-quality video found after the break. [Carpespasm] describes the setup; the black pieces are lead plates which are bent into a U-shape to straddle two ice-cube compartments. The each end of the plate is dipping into the acid to make the connection. Once assembled the battery was connected to a charger for about two hours. It puts out 8.5V and is tested by powering an LED cube. This works for just a short period and really drives home the lesson that battery concepts are easy to understand, but reliable battery technology is a bit harder to achieve.

Continue reading “Shocking Use Of Ice Cube Trays” →