Cardboard Robot Deathmatch

September 29, 2015 by Elliot Williams 21 Comments

Fighting robots are even more awesome than regular robots. But it’s hard for us to imagine tossing all that money (not to mention blood, sweat and tears) into a bot and then watching it get shredded. The folks at Columbia Gadget Works, a Columbia, MO hackerspace had the solution: make the robots out of cardboard.

The coolest thing about building your robots out of cardboard and hot glue is that it’s cheap, but if they’re going to be a modest scale, they can still be fairly strong, quick to repair, and you’re probably going to be able to scrounge all the parts out after a brutal defeat. In short, it’s a great idea for a hackerspace event.

Continue reading “Cardboard Robot Deathmatch” →

The DMCA May Have Allowed Volkswagen To Hide ECU Software From The EPA

September 29, 2015 by Cameron Coward 102 Comments

A lot of questions have been raised by the recent “dieselgate” scandal. Should automakers be held accountable for ethically questionable actions? Are emissions standards in the United States too restrictive? Are we ever going to stop appending “gate” onto every mildly controversial news story? But, for Hackaday readers, the biggest question is most likely “how did they get away with it?” The answer is probably because of a law a lot of hackers are already familiar with: the DMCA.

If you haven’t seen the news about Volkswagen’s emissions cheating scheme, we’ll get you caught up quickly. In the United States, EPA emissions testing is done in a very specific and predictable way. Using clever ECU software tricks, Volkswagen was able to essentially “detune” the engines of their diesel vehicles when they were being tested by the EPA. This earned them passing marks, while allowing them to provide a less-restrictive ECU profile for the normal driving that buyers would actually experience.

How could they get away with this simple trick when a brief look at the ECU software would have revealed it? Because, they were able to hide under the umbrella of the DMCA. The ECU software is, of course, not intended to be user-accessible, which means that Volkswagen is allowed to lock it down. That, in turn, means that the EPA isn’t allowed to circumvent that security without violating the DMCA and potentially breaking the law. This kept the EPA’s hands tied, and Volkswagen protected. They were only found out because independent testing (that didn’t follow EPA procedure) revealed vastly different emissions levels.

Is your blood boiling yet? Add this to the stack of reasons why the EFF is trying to end the DRM parts of the DMCA.

[via /.]

3D Printing Has Evolved Two Filament Standards

September 29, 2015 by Brian Benchoff 56 Comments

We’re far beyond the heyday of the RepRap project, and the Hackaday tip line isn’t seeing multiple Kickstarters for 3D printers every week. In a way, this is a bit of a loss. The rapid evolution of the low-cost 3D printer seen in the first half of this decade will never be matched, and from now on we’ll only see incremental improvements instead of the revolutionary steps taken by the first Prusa, the first Printrbot, and even the Makerbot Replicator.

This doesn’t mean everything is standardized. There’s still enough room for arguing over deltas versus Cartesians, beds moving on the Y axis versus moving along the Z, and a host of other details that make the current crop of printers so diverse. One of these small arguments is especially interesting: the diameter of the filament. Today, you can get any type of plastic you want, in any color, in two sizes: 1.75 and 3mm. If you think about it, it’s bizarre. Why on Earth would filament manufacturers, hot end fabricators, and even printer manufacturers decide to support two different varieties of the same consumable? The answer is a mix of a historical choice, engineering tradeoffs, and an absolutely arbitrary consequence of what 3D printers actually do.

Continue reading “3D Printing Has Evolved Two Filament Standards” →

Gathering The Hacking Community Of Zurich

September 29, 2015 by Sophi Kravitz 3 Comments

When my Swiss cousin-in-law sent us her wedding invitation, I didn’t immediately think I’d get to see Hackaday.io user [antti.lukats‘] tiny FPGA projects as part of the deal. I’m really glad that I came to Switzerland for the wedding, and also got to be a part of an awesome meetup in Zurich’s Fablab. [Antti], who was at the meetup, is pictured above holding a small tube full of FPGAs, he’s a Hackaday Prize Best Product finalist with FPGA project DIPSY.

As is becoming the norm for Hackaday meetups, we ask people to bring projects. We then count all the people who want to present something and squeeze all the presentations into just about 90 minutes. Before and after the lightening talks, there’s always plenty of time to walk around and see individual projects, meet people and of course eat and drink.

Continue reading “Gathering The Hacking Community Of Zurich” →

Autodesk Open Sources Ember 3D Printer

September 29, 2015 by Al Williams 20 Comments

If you’ve ever been interested in what goes on inside a (roughly) $6000 DLP stereolithography printer, you might want to check out the recent announcement from Autodesk that open sources their electronics and firmware for their Ember 3D printer. The package includes the design files and code for their controller (which is more or less a BeagleBone black with a USB hub, and more memory. It also has two AVR controllers for motor and light control.

Continue reading “Autodesk Open Sources Ember 3D Printer” →

Quantum Computing Kills Encryption

September 29, 2015 by Elliot Williams 79 Comments

Imagine a world where the most widely-used cryptographic methods turn out to be broken: quantum computers allow encrypted Internet data transactions to become readable by anyone who happened to be listening. No more HTTPS, no more PGP. It sounds a little bit sci-fi, but that’s exactly the scenario that cryptographers interested in post-quantum crypto are working to save us from. And although the (potential) threat of quantum computing to cryptography is already well-known, this summer has seen a flurry of activity in the field, so we felt it was time for a recap.

How Bad Is It?

If you take the development of serious quantum computing power as a given, all of the encryption methods based on factoring primes or doing modular exponentials, most notably RSA, elliptic curve cryptography, and Diffie-Hellman are all in trouble. Specifically, Shor’s algorithm, when applied on a quantum computer, will render the previously difficult math problems that underlie these methods trivially easy almost irrespective of chosen key length. That covers most currently used public-key crypto and the key exchange that’s used in negotiating an SSL connection. That is (or will be) bad news as those are what’s used for nearly every important encrypted transaction that touches your daily life.

Continue reading “Quantum Computing Kills Encryption” →

Minimal Mighty Mite

September 29, 2015 by Elliot Williams 23 Comments

If you’re getting started building your own ham radio gear, it’s hard to imagine a more low-tech transmitter than the Mighty Mite, but [Paul Hodges, KA5WPL] took it one step further and rolled his own variable capacitor. (That’s the beer can with tape and alligator clips that you see on the left.)

A Mighty Mite is barely a radio at all. One transistor, capacitor, crystal and inductor in the form of a bunch of wire wrapped around a pill bottle form a minimalist oscillator, and then by keying this on and off with a switch, you’re sending Morse code. [Bill Meara], of the Soldersmoke Podcast, has been a passionate advocate of the Mighty Mite, suggesting that it can be made by scrounging the 3.57954 MHz colorburst crystal from an old analog TV set, which tunes the radio to a legal frequency for ham radio operators. (It will also probably work with other low-MHz crystals from your junkbox, but it won’t necessarily be legal.)

If the crystal is “easily” scavengeable, and the rest of the radio is easily home-made, the tuning capacitor (obtainable from old AM/FM radios) can become the sticking point. So [Paul] cut up two aluminum “beverage” cans, wrapped the inner one in electrical tape, hooked up wires and made his own variable capacitor. By sliding the cans in or out so that more or less of them overlap, he can tune the radio to exactly the crystal’s natural frequency.

If you’re interested in building a Mighty Mite, you should definitely look at the topic on Soldersmoke. There are more build instructions online as well as plans for an optional filter to take off the harmonics if you’re feeling ambitious.

If you’re not a Morse code wiz, we can’t help but note that you could replace the key with a simple FET (we’d use a 2N7000, but whatever) and then you’ve got the radio under microcontroller control. Scavenge through Hackaday’s recent Morse code projects for ideas, and we’re sure you’ll come up with something good.

Continue reading “Minimal Mighty Mite” →