Broadcast TV Simulator Keeps The Nostalgia Flowing

September 26, 2024 by Dan Maloney 40 Comments

Watch out, Gen X-ers — there’s a nostalgia overload heading your way, courtesy of this over-the-air TV simulator. And it has us feeling a little Saturday morning cartoon-ish, or maybe even a bit Afterschool Special.

[Shane C Mason]’s “FieldStation42” build centers around a period-correct color TV, and rightly so — a modern TV would be jarring here, and replacing the CRT in this irreplaceable TV would be unthinkable. Programming comes via painstakingly collected sitcoms, dramas, news broadcasts, and specials, all digitized and stored on disk and organized by the original networks the programs came from. Python running on a Raspberry Pi does the heavy lifting here, developing a schedule of programs for the week that makes sense for the time of day — morning news and talk, afternoon soaps, the usual family hour and prime time offerings, and finally [Carson] rounding out the day, because that’s all we had for late night.

As for switching between stations, rather than risk damaging the old TV, [Shane] really upped his nostalgia game and found an old antenna rotator control box. These were used to steer the directional antenna toward different transmitters back in the day, especially in fringe areas like the one he grew up in. He added a set of contacts to the knob and a Pi Pico, which talks to the main Pi and controls which “channel” is being viewed. He also added an effect of fading and noise in the video and audio between channels, simulating the antenna moving. The video below shows it in action.

For those who missed the Golden Age of TV, relax; as [Shane] correctly surmises after going through this whole project, Golden Ages only exist in your mind. Things were certainly different with 70s mass media, a fact which this build captures neatly, but that doesn’t mean they were better. Other than Saturday mornings, of course — those were objectively better in every way.

Continue reading “Broadcast TV Simulator Keeps The Nostalgia Flowing” →

Labelled die of the Ramtron FM24C64 FeRAM chip. (Credit: Ken Shirriff)

Inside A 1999 Ramtron Ferroelectric RAM Chip

September 26, 2024 by Maya Posch 16 Comments

Structure of the Ramtron FeRAM. The image is focus-stacked for clarity. (Credit: Ken Shirriff)

Although not as prevalent as Flash memory storage, ferroelectric RAM (FeRAM) offers a range of benefits over the former, mostly in terms of endurance and durability, which makes it popular for a range of (niche) applications. Recently [Ken Shirriff] had a look inside a Ramtron FM24C64 FeRAM IC from 1999, to get an idea of how it works. The full die photo can be seen above, and it can store a total of 64 kilobit.

One way to think of FeRAM is as a very small version of magnetic core memory, with lead-zirconate-titanate (PZT) ferroelectric elements making up the individual bits. These PZT elements are used as ferroelectric capacitors, i.e. the ferroelectric material is the dielectric between the two plates, with a positive voltage storing a ‘1’, and vice-versa.

In this particular FeRAM chip, there are two capacitors per bit, which makes it easier to distinguish the polarization state and thus the stored value. Since the distinction between a 0 and a 1 is relatively minor, the sense amplifiers are required to boost the signal. After a read action, the stored value will have been destroyed, necessitating a write-after-read action to restore the value, all of which adds to the required logic to manage the FeRAM. Together with the complexity of integrating these PZT elements into the circuitry this makes these chips relatively hard to produce and scale down.

You can purchase FeRAM off-the-shelf and research is ongoing, but it looks to remain a cool niche technology barring any kind of major breakthrough. That said, the Sega Sonic the Hedgehog 3 cartridges which used an FeRAM chip for save data are probably quite indestructible due to this technology.

Bread Proofing Box For The Hungry Hacker

September 25, 2024 by Heidi Ulrich 29 Comments

While normally more comfortable with a soldering iron, [LucidScience] recently took a dive into woodworking and hardware store electronics to build a DIY proofing box. It’s a clever design that doubles as furniture, with some cool problem-solving along the way. While it might not be your typical hack, repurposing seedling heat mats and working with insulation makes it a neat project for anyone who likes to tinker. Plus, the whole thing cranks out two loaves of sourdough bread each week!

The setup includes an 8 watt heat mat, typically used for aquariums or seedlings, and a temperature control box, so no complicated wiring is needed. The entire box is insulated with rigid foam, which makes it energy efficient—once the foam was installed, the heat mat only needed to turn on about a quarter of the time. To give it a more polished look, [LucidScience] hid the raw plywood edges with oak trim, and even added an adjustable vent for moisture control. Pretty slick for something built from basic materials and a few tools!

While this proofing box isn’t a groundbreaking electronics project, it shows how even simple hardware can be repurposed for entirely new applications. The combination of woodworking and basic electronics makes it an approachable project for DIYers looking to stretch their skills. Whether you’re into hacking, woodworking, or just love good bread, this build has something for everyone. [LucidScience]’s clear instructions and simple materials make this a great weekend project that can upgrade your baking game.

Continue reading “Bread Proofing Box For The Hungry Hacker” →

Remembering CompuServe: The Online Experience Before The World Wide Web

September 25, 2024 by Maya Posch 29 Comments

July 1981 cover of CompuServe's magazine. — July 1981 cover of CompuServe’s magazine.

Long before the advent of the Internet and the World Wide Web, there were other ways to go online, with Ohio-based CompuServe being the first to offer a consumer-oriented service on September 24, 1979. In an article by [Michael De Bonis] a listener-submitted question to WOSU’s Curious Cbus is answered, interspersed with recollections of former users of the service. So what was CompuServe’s contribution to society that was so important that the state of Ohio gave historical status to the building that once housed this company?

The history of CompuServe and the consumer-facing services which it would develop started in 1969, when it was a timesharing and remote access service for businesses who wanted to buy some time on the PDP-10s that Golden United Life Insurance as the company’s subsidiary used. CompuServe divested in 1975 to become its own, NASDAQ-listed company. As noted in the article, while selling timeshares to businesses went well, after business hours they would have these big computer systems sitting mostly idly. This was developed by 1979 into a plan to give consumers with their newfangled microcomputers like the TRS-80 access.

Originally called MicroNet and marketed by Radio Shack, the service offered the CompuServe menu to users when they logged in, giving access to features like email, weather, stock quotes, online shipping and booking of airline tickets, as well as online forums and interactive text games.

Later renamed to CompuServe Information Service (CIS), it remained competitive with competitors like AOL and Prodigy until the mid-90s, even buying one competitor called The Source. Ultimately it was the rise of Internet and the WWW that would close the door on this chapter of computing history, even as for CompuServe users this new Internet age would have felt very familiar, indeed.

The Statial-b Open Source Adjustable Mouse

September 25, 2024 by Dave Rowntree 20 Comments

Many of us are very heavy computer users, and two items that can affect our comfort and, by extension, our health are the keyboard and the mouse. We’ve covered many ergonomic and customisable keyboards over the years, but we are not sure we’ve covered a fully adjustable mouse until now. Here’s [Charlie Pyott] with their second take on an adjustable mouse, the open source, statial-b.

[Charlie] goes into an extensive discussion of the design process in the video after the break, which is a fascinating glimpse into the methods used by a professional industrial designer. The statial concept breaks the contact surfaces of the mouse into fixed and moveable sections. The moveable sections are attached to the mouse core via a pair of ball joints connected with extendible arms, allowing the surfaces to be adjusted for both position and orientation. The design process starts with 3D scanning their ‘workhorse mouse,’ a Razer Deathadder Elite. This creates a reference volume within which the statial body should fit in its minimal configuration.

The design has a fixed central core, with each button (including the central scroller) separately adjustable. The side panel with a pair of thumb buttons is also moveable. Creating a model in Rhino 3D working with the grasshopper visual programming environment [Charlies] explored the surface constraints for the base, claw, finger and vertical grip styles common among mouse users. This model was then fed into Fusion 360 for the detailed design. After completing the design, it was passed back into Rhino 3D to add lattice effects to the panel. This helps reduce weight and lets the internal LEDs shine through. The design is intended for resin printing, so you could go wild with the visuals by missing custom resins if you were so inclined.

Continue reading “The Statial-b Open Source Adjustable Mouse” →

A DaVinci Screw-Cutting Machine

September 25, 2024 by Dave Rowntree 5 Comments

It’s not news that Leonardo DaVinci was somewhat ahead of his time, and over the centuries many of the creations in his sketchbooks have been created and proved quite functional. The guys from the YouTube channel How To Make Everything have been looking at one such sketch, a screw thread-cutting machine. At first glance, it seems a little flawed. Threads are hard to make by hand, and you can see that this thread-cutting machine needs two identical threads operating as a reference to make it work. However, as the guys demonstrate, you can create threads by hand using simple methods.

Starting with an offset blade mounted on a block with a hole through it, a dowel can be scribed with a starter thread. This can then be worked by hand to cut enough of a groove for the application. They demonstrated that the machine was viable using nothing but wood for construction. A metal blade was mounted, and some preload force was applied to it with a spring. The dowel to be cut was loaded, and the machine ran back and forth enough times to create a very nice-looking screw thread. And once you’ve made two identical threaded dowels, you can use them to upgrade the machine or even build a second. Once you have a repeatable way to make such threads, all kinds of applications become more accessible. Need a bench vice? No problem now!

Whilst the demonstration doesn’t precisely follow the plans laid out by the master inventor, they aren’t all that clear on the cutting tool after all, it’s nice to see people still wanting to build his ideas, and we’ll certainly be following along.

If you like these “from scratch” builds, you’ll like this other one. Leonardo’s work wasn’t just about machines; he was also very interested in science. Here’s a recreation of his demonstration of gravity as a form of acceleration.

Continue reading “A DaVinci Screw-Cutting Machine” →

Reviving A 15-Year Old Asus EeePC With Modern MX Linux

September 25, 2024 by Maya Posch 66 Comments

It’s often said these days that computers don’t become outdated nearly as quickly as they did in the past, with even a decade-old computer still more than capable of handling daily tasks for the average person. Testing that theory, [Igor Ljubuncic] revisited the Asus eeePC which he purchased back in 2010. Although it’s not specified exactly which model it is, it features an Intel Atom N450 (1 core, 2 threads) running at 1.67 GHz, 1 GB of 667 MHz DDR2 and a 250 GB HDD, all falling into that ultra-portable, 10.1″ Netbook category.

When new, the netbook came with Windows 7 Starter Edition, which [Igor] replaced with Ubuntu Netbook Remix 10.04, which was its own adventure, but the netbook worked well and got dragged around the world on work and leisure assignments. With increasingly bloated updates, Ubuntu got replaced by MX Linux 18, which improved matters, but with the little CPU struggling more and more, [Igor] retired the netbook in 2019. That is, until reviving it recently.

Upon booting, the CMOS battery was of course empty, but the system happily continued booting into MX Linux. The Debian update repositories were of course gone, but changing these to the archive version allowed for some (very old) updates. This raised the question of whether modern Linux would even run on this ancient Atom CPU, the answer of which turned out to be a resounding ‘yes’, as MX Linux still offers 32-bit builds of its most recent releases. A 15 minute upgrade process later, and a 2 minute boot later, the system was running a Linux 6.1 kernel with Xfce desktop.

As for the performance, it’s rather what you expect, with video playback topping out at 480p (on the 1024×600 display) and applications like Firefox lacking the compact density mode, wasting a lot of screen space. Amazingly the original battery seems to still deliver about half the runtime it did when new. All of which is to say that yes, even a ‘low-end’ 2010-era netbook can still be a very usable system in 2024, with a modern OS.