LCD Backlight Repair

January 22, 2010 by Mike Szczys 13 Comments

Another broken LCD TV came [Steve DiRaddo’s] way. This one had a broken backlight that he wanted to fix. He scrapped his LCD light table in order use the inverter. The two televisions were not the same size, nor made by the main manufacturer, but backlights all operate under the same principles. Using an inverter from a bit larger model meant it would have enough power to illuminate the lamps but he knew there’d be a problem with connectors and pinouts. After a bit of testing and creative wiring he got the system back up and running.

He’s got some extra parts left over from each TV including a bunch of CCFL lamps. Sound like it’s time to add some ground effects to his bike.

Hardware Store Follow Focus

January 22, 2010 by Mike Szczys 31 Comments

Want to do quick and accurate focus change with your DSLR? Here’s a discussion thread covering dirt-cheap solutions. It starts with a broccoli rubber-band and a couple of zip ties. That being a bit chintzy, the more popular build seen above uses a hose clamp, rubber band for padding, a drawer pull, a nut, and some threaded rod. If you build it, be very careful not to over-tighten the clamp and crush your focus ring! After the break we’ve embedded a video of what follow focus looks like through the lens and what is happening with the camera during the shoot.

Continue reading “Hardware Store Follow Focus” →

Arduino Programmer For Arduino

January 22, 2010 by Mike Szczys 29 Comments

[youtube=http://www.youtube.com/watch?v=M-sFQNIXde8]

Wow, that title is flamebait… but give us a chance to explain. [George] wrote some code for the Arduino that allows it to program another Arduino. You may be thinking to yourself “this has already been done”. In a way it has, with the AVR ISP programming shield. But once the code has been uploaded to the Arduino, you don’t need a computer to program the next chip. This concept turns an Arduino into an in-the-field programmer. Right now his code only programs the ATmega328 and it’s a little buggy, but the concept is solid. A fully functioning independent programmer is easy to image; [George] has laid the ground work, the AVR ISP programming firmware has proven this can work with several different chips, and if your AVR has an ATmega328 there should be plenty of room to store the code you plan to flash to the target microprocessors. It’s up to you to put all the pieces together.

SpiderBot Prompts Laser Envy

January 21, 2010 by Mike Szczys 14 Comments

[Daniel’s] horrifying hexapod makes us wish we were sitting next to a laser cutter. The parts are cut from 4.9mm plywood and include laser-sculpted sections to allow the twenty servos to properly seat in their mounting spaces. We would suggest that you build it in secret so as not to ruin the surprise when your house mates come home to find this romping around their room.

Sadly, we couldn’t find video of this in action but go look at this other hexapod if the still shots aren’t good enough. Adding two legs to the party, you behold the video after the break of the 8-legged spider milled from ABS.

Continue reading “SpiderBot Prompts Laser Envy” →

Adafruit Eagle Library

January 21, 2010 by Mike Szczys 15 Comments

We love it when a PCB comes out right the first time. We’re careful enough with our designs that if something is wrong it’s usually a footprint problem, like we picked the wrong package for the components. Adafruit is helping to make the design process easier by sharing their Eagle library. Like the Eagle library version control we saw earlier in the month, this library is housed on github making it easy to stay up-to-date. The library includes many components (switches, crystals, IC’s, etc.), and fixes some prolbem-footprints, like 0805 surface mount pads.

Turntable Light Sequencer

January 21, 2010 by Mike Szczys 31 Comments

[Benjamin] built a sequencer that uses a turntable and light sensors to lay down a funky beat. If you like creepy videos with repeated gratuitous corderoy-clad rear-ends we’ve got you covered after the break. Art film aside, he’s got an interesting project. Four light sensors are mounted below the turning record with LEDs hovering above. His hatred for old LP records is apparent because holes must be drilled in a disc for the light to shine through. The four notes in the sequence can be altered in voice and color, along with controls for motor speed and direction. The project also has four manual inputs to add some variety to the repetitive beat sequence. It’s a bit less practical than the penny sequencer but fun none-the-less.

Continue reading “Turntable Light Sequencer” →

Coded Entry Using Your Wristwatch

January 21, 2010 by Mike Szczys 24 Comments

[Ziyan] and [Zach] built a door entry system that uses a code entered from your wristwatch. They’re using the TI eZ-430 Chronos that we saw in November. There is a project box mounted over the deadbolt lever. Inside, the wireless fob waits for the watch to connect. When a watch has connected and the correct code is received (using 128 bit encryption) the fob actuates a servo to turn the lock. On the user side of things the code is entered by tapping the watch. The built-in accelerometer picks up these taps and relays them to the door unit.

It’s a heck of a project! Check out their demonstration video after the break. We’d like to see a mechanical option for escaping the apartment in case the door unit fails but otherwise we think this is perfectly executed. We’re looking forward to seeing more projects that tap into this TI hardware.

Continue reading “Coded Entry Using Your Wristwatch” →