China Plans Its Own Megaconstellation To Challenge Starlink

June 22, 2023 by Lewin Day 39 Comments

Satellite internet used to be a woeful thing. Early networks relied on satellites in geostationary orbits, with high latency and minimal bandwidth keeping user demand low. That was until Starlink came along, and provided high-speed, low-latency internet access using a fleet of thousands of satellites in Low Earth orbit.

Starlink has already ruffled feathers due to concerns around light pollution and space junk in particular. Now, it appears that China may be readying its own competing constellation to avoid being crowded out of low orbits by the increasingly-popular service.

Continue reading “China Plans Its Own Megaconstellation To Challenge Starlink” →

Hackaday Prize 2023: Sleek Macro Pad Makes 2FA A Little Easier

June 20, 2023 by Dan Maloney 1 Comment

We all know the drill when it comes to online security — something you know, and something you have. But when the “something you have” is a two-factor token in a keyfob at the bottom of a backpack, or an app on your phone that’s buried several swipes and taps deep, inconvenience can stand in the way of adding that second level of security. Thankfully, this “2FA Sidecar” is the perfect way to lower the barrier to using two-factor authentication.

That’s especially true for a heavy 2FA user like [Matt Perkins], who typically needs to log in and out of multiple 2FA-protected networks during his workday. His Sidecar is similar in design to many of the macro pads we’ve seen, with a row of Cherry MX key switches, a tiny TFT display — part of an ESP32-S3 Reverse TFT Feather — and a USB HID interface. Pressing one of the five keys on the pad generates a new time-based one-time password (TOTP) and sends it over USB as typed keyboard characters; the TOTP is also displayed on the TFT if you prefer to type it in yourself.

As for security, [Matt] took pains to keep things as tight as possible. The ESP32 only connects to network services to keep the time synced up for proper TOTP generation, and to serve up a simple web configuration page so that you can type in the TOTP salts and service name to associate with each key. He also discusses the possibility of protecting the ESP32’s flash memory by burning the e-fuses, as well as the pros and cons of that maneuver. The video below shows the finished project in action.

This is definitely a “use at your own risk” proposition, but we tend to think that in the right physical environment, anything that makes 2FA more convenient is probably a security win. If you need to brush up on the risks and benefits of 2FA, you should probably start here.

Continue reading “Hackaday Prize 2023: Sleek Macro Pad Makes 2FA A Little Easier” →

Cottonization: Making Hemp And Flax Fibers Into The Better Cotton

June 20, 2023 by Maya Posch 16 Comments

These days it’s hard to imagine that fabrics were ever made out of anything other than cotton or synthetic fibers, yet it wasn’t too long ago that hemp and flax-based fabrics — linen — were the rule rather than the exception. Cotton production has for centuries had the major disadvantages of requiring a lot of water and pesticides, and harvesting the cotton was very labor-intensive, making cotton rather expensive. In order to make separating the cotton fibers from the seed easier, improved versions of the cotton gin (‘cotton engine’) were developed, with the 19th century’s industrial revolution enabling a fully automated version.

What makes cotton attractive is the ease of processing these fibers, which are part of the seed pod. These fibers are 25 mm – 60 mm long, 12 μm – 45 μm fine fibers that can be pulled off the seeds and spun into yarn or whatever else is needed for the final product, much like wool. Hemp and flax fibers, in contrast, are extracted from the plant stem in the form of bast fibers. Rather than being pure cellulose, these fibers are mostly a mixture of cellulose, lignin, hemicellulose and pectin, which provide the plant with rigidity, but also makes these fibers coarse and stiff.

The main purpose of cottonization is to remove as much of these non-cellulosic components as possible, leaving mostly pure cellulose fibers that not only match the handleability of cotton fibers, but are also generally more durable. Yet cottonization used to be a long and tedious process, which made bast fiber-based textiles expensive. Fortunately, the steam explosion cottonization method that we’ll be looking at here may be one of the methods by which the market will be blown open for these green and durable fibers.

Continue reading “Cottonization: Making Hemp And Flax Fibers Into The Better Cotton” →

Review: InfiRay P2 Pro Thermal Camera

June 19, 2023 by Tom Nardi 62 Comments

It probably won’t surprise you to learn that Hackaday is constantly hounded by companies that want us to review their latest and greatest gadget. After all, getting us to post about their product is cheaper, easier, and arguably more effective than trying to come up with their own ad campaign. But if you’ve been with us for awhile, you’ll also know that in-house reviews aren’t something we actually do very often.

The reason is simple: we’re only interested in devices or products that offer something useful or unique to this community. As such, the vast majority of these offers get ignored. I’ll give you an example. For whatever reason, multiple companies have been trying desperately to send me electric bikes with five-figure price tags this year. But since there’s no obvious way to turn that into useful content for the readers of Hackaday, I’m still stuck pedaling myself around like it’s the 1900s. I kid of course…I haven’t dared to get on a bike in a decade.

So I don’t mind telling you that, when InfiRay contacted me about reviewing their P2 Pro thermal camera, the email very nearly went into the trash. We’ve seen these kind of phone-based thermal cameras before, and it seemed to be more of the same. But after taking a close look at the specs, accessories, and claims laid out in the marketing material, I thought this one might be worth checking out first-hand.

Continue reading “Review: InfiRay P2 Pro Thermal Camera” →

These 3D Printed Biocatalytic Fibers Scrub Carbon Dioxide

June 9, 2023 by Dan Maloney 12 Comments

On today’s episode of “What If?” — what if the Apollo 13 astronauts had a 3D printer? Well, for one thing, they may have been able to avoid all the futzing with duct tape and procedure list covers to jury rig the lithium hydroxide filters, at least if they’d known about these 3D printed enzymatic CO₂ filters. And time travel…they probably would have needed that too.

A bit of a stretch, yes, but environmental CO₂ scrubbing is at least one use case for what [Jialong Shen] et al from the Textile Engineering Department at North Carolina State University have developed here. The star of the show isn’t so much the 3D printing — although squirting out a bio-compatible aerogel and cross-linking it with UV light on the fly is pretty cool. Rather, the key to developing a CO₂-scrubbing textile is carbonic anhydrase, or CA, a ubiquitous enzyme that’s central to maintaining acid-base homeostasis. CA is a neat little enzyme that coordinates a zinc ion in its active site and efficiently catalyzes the addition of water to carbon dioxide to produce bicarbonate and hydrogen ions. A single CA molecule can catalyze the conversion of up to a million CO₂ molecules per second, making it very attractive as a CO₂ filter.

In the current work, an aerogel of poly(ethylene glycol) diacrylate/poly(ethylene oxide) (PEG-DA/EO) was used to entrap CA molecules, holding them in place in a polymer matrix to protect them from denaturation while still allowing access to gaseous CO₂. The un-linked polymers were mixed with photoinitiators and a solution of carbonic anhydrase and extruded through a fine nozzle with a syringe pump. The resulting thread was blasted with 280–450 nm UV light, curing the thread instantly. The thread is either wound up as a mono-filament for later weaving or printed directly into a 2D grid.

The filament proved to be quite good at CO₂ capture, managing to scavenge 24% of the gas from a mixture passed over it. What’s more, the entrapped enzyme appears to be quite stable, surviving washes with various solvents and physical disruptions like twisting and bending. It’s an exciting development in catalytic textiles, and besides its obvious environmental uses, something like this could make cheap, industrial-scale bioreactors easier to build and run.

Photo credits: [Sen Zhang] and [Jialong Shen], NC State; [Rachel Boyd], Spectrum News 1

[via Phys.org]

Hackaday Podcast 221: The Future Of The Raspberry Pi, Sniffing A Toothbrush, Your Tactical Tool Threshold

June 2, 2023 by Tom Nardi 2 Comments

Editors Elliot Williams and Tom Nardi are back in the (virtual) podcast studio to talk the latest phase of the 2023 Hackaday Prize, the past, present, and future of single-board computers, and a modern reincarnation of the Blackberry designed by hardware hackers. They’ll also cover the current state of toothbrush NFC hacking, the possibilities of electric farm equipment, and a privately funded satellite designed to sniff out methane. Stick around till the end to find out if there really is such a thing as having too many tools.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Or download all the things!

Continue reading “Hackaday Podcast 221: The Future Of The Raspberry Pi, Sniffing A Toothbrush, Your Tactical Tool Threshold” →

Open-Source AR Hack Chat

May 29, 2023 by Dan Maloney No comments

Join us on Wednesday, May 31 at noon Pacific for the Open-Source AR Hack Chat with Raj Nakaraja!

We may live in a soup of electromagnetic waves that range in wavelength from the diameter of Jupiter down to a fraction of the radius of a hydrogen atom, but our eyeballs have evolved to only let us sense a tiny slice of that spectrum. That’s too bad, really, because there’s a lot going on in the rest of the spectrum that could potentially inform our ROYGBIV-centric view of the world. Think of the possibilities of being able to see UV the way an insect does, or being able to watch the radiation pattern of an antenna and make adjustments on the fly. Sounds like a job for augmented reality.

If seeing the world with different eyes sounds as cool to you as it does to us, you won’t want to miss Raj Nakaraja’s stop by the Hack Chat. Raj is head of engineering at Brilliant Labs, an augmented reality company that’s looking to bring AR into the mainstream. They’ve got some cool ideas about AR, and we’re going to take the opportunity to talk to Raj about open-source AR in general, Brilliant’s products specifically, and how AR can be incorporated into not only our projects, but into our lives as well.

Our Hack Chats are live community events in the Hackaday.io Hack Chat group messaging. This week we’ll be sitting down on Wednesday, May 31 at 12:00 PM Pacific time. If time zones have you tied up, we have a handy time zone converter.

Click that speech bubble to the right, and you’ll be taken directly to the Hack Chat group on Hackaday.io. You don’t have to wait until Wednesday; join whenever you want and you can see what the community is talking about.