Monocrome To Magnificent: Computer Display Chronology

Remember when CGA came out and made monocrome monitors look horrible? Well CGA is crap, VGA is where it’s at. Wait… weren’t there a couple of standards in between those two? Take a walk down memory lane and relive the evolution of computer display technology. You’ll start with displays that are more or less CRT oscilloscopes and end up in better than high-def territory. The article is an interesting read but for those with short attention spans jump to the fourth page and check out the chart of technologies, resolutions, and implementation dates. We’ve come a long way in a few short decades.

Jamming Gripper Completes Robot Drug Dealer

Here’s an inexpensive way to build your own jamming gripper. [Steve Norris] combined a robot arm with a few inexpensive items to achieve similar results as the original. Much like the last DIY version he started with a balloon and some coffee grounds, but instead of using his own body as a vacuum pump he sourced a Reynolds Handi-Vac, an inexpensive food vacuum sealer. It connects to the balloon using some plastic tubing, and sucks all of the air out, locking the coffee grounds around an object for a firm grip. The video after the break even shows the gripper picking up two aspirin. At first we thought a servo motor was being used to seal off the tube once the air had been pumped out. Instead, it is covering a hole in the tubing, which breaks the vacuum when it’s time to let go of an object.

Continue reading “Jamming Gripper Completes Robot Drug Dealer” →

Sparkfun Free Day Recap

It looks like the dust has finally settled with sparkfun’s free day. They managed to give away $150,541 to users and $22,988 to charity.  The general idea is you could ether take $10/year you’ve been a sparkfun customer, or take a 10 question quiz and earn $10/correct answer plus some money for charity. It looks like some technical difficulties prevented people from taking the quiz until free day had been under way for a couple of hours. Once they managed to fix the problem the money went pretty fast, eating up the last $40,000 in about 5 minutes. So did anyone manage to get anything good? Be sure to checkout sparkfun’s recap video after the break for more details.

Continue reading “Sparkfun Free Day Recap” →

Radios Without Power Sources

[Goodhart] is sharing his process for building a couple different AM radios. It’s surprising how few components he’s using; the first build is just a germanium diode, some wire, and a piezo earpiece. But it strikes us that both of the radios he gives build instructions for have no power source. We’re also amused by the process of selecting the station. His example uses 770 AM, and requires you to take the wire and place it up in a tree with the two ends about 1216 feet apart. We think there’s something a bit off with the math, but with that much conductor to start with there might be enough induced current for you to actually hear something come out the piezo. We don’t think we’ll be trying this anytime soon, but we’d like to hear comments from those of you who do (or already have).

Jeep-uter Adds Push Button Control To Your Vehicle

[Ed Zarick] built a module to control his vehicle which he calls the Jeeputer. The name’s a mash-up of Jeep and Computer; the device itself is a combination of Arduino, character LCD, and a collection of shift registers and relays for interfacing. Watch the video after the break to see what this can do. We were surprised in the beginning when he says that all he has left to do is remove the steering wheel lock and he’ll be able to drive using the interface, but we think he means type in a code to unlock the ignition, not remote control for his car. He then goes on to demonstrate garage door control, power cycling for CB radio, GPS, 110V power inverter, vehicle light control, and much more. This must be the most feature packed car computer we’ve seen so far.

Continue reading “Jeep-uter Adds Push Button Control To Your Vehicle” →

VR! Now With More Kinect, Wiimote, And Vuzix

Those of us that remember when you could actually go to a mall and play on a VR game machine, tend to remember it fondly. What happened? The computing horsepower has grown so much, our graphics now days are simply stunning, yet there’s been no major VR revival. Yeah, those helmets were huge and gave you a headache, but it was worth it.  With the 3d positioning abilities of the latest game crazes, the Wiimote and the Kinect, [Nao_u] is finally taking this where we all knew it should have gone(google translated). Well, maybe we would have had less creepy anime faces flying around squirting ink, but the basics are there. He has created a VR system utilizing the Wiimote for his hand position, a Vuzix display for head positioning, and the kinect for body tracking. Even with the creepy flying heads I want to play it, especially after seeing him physically ducking behind boxes in the video after the break. Long live VR!

Continue reading “VR! Now With More Kinect, Wiimote, And Vuzix” →

Refurbishing A Refrigerator For Fermenting

[Mikey Sklar] wrote in to show us how he refurbished a neighbors useless refrigerator as a fermentation chamber. [Mikey] is a fan of making breads, kemchi, yogurt, and tempeh. To make these, it helps to have a completely controlled temperature for them to ferment in. [Mikey] developed a temp controller for this in the past, but had to either build a control box or use a giant chest freezer.  This is not optimal for limited space, such as a kitchen. He got lucky when a neighbor tossed a wine cooler into the trash. These little coolers are perfectly sized for a kitchen and even have a glass front so you can keep an eye on what is going on inside without having to open it and effect your temps. [Mikey] ripped it open, replaced the peltier cooler with a large heat lamp and his temp controller. Since he was making yogurt with this one, he needed only to heat it. The final product turned out pretty effective.