The Cyborgs Among Us: Exoskeletons Go Mainstream

January 28, 2019 by Dan Maloney 39 Comments

Every technological advancement seems to have a sharp inflection point, a time before which it seems like any early adopters are considered kooks, but beyond which the device or service quickly becomes so mainstream that non-adopters become the kooky ones. Take cell phones, for example – I clearly remember a news report back in the 1990s about some manufacturers crazy idea to put a digital camera in a phone. Seemingly minutes later, you couldn’t buy a phone without a camera.

It seems like we may be nearing a similar inflection point with a technology far more complex and potentially far more life-altering than cameras in cell phones: powered exoskeletons. With increasing numbers of news stories covering advancements in exoskeletal assistants for the elderly, therapeutic applications for those suffering from spinal cord injuries and neurodegenerative diseases, and penetration into the workplace – including the battlefield – as amplifiers of human effort, it’s worth taking a look at where we are with exoskeletons before seeing someone using one in public becomes so commonplace as to go unnoticed.

Continue reading “The Cyborgs Among Us: Exoskeletons Go Mainstream” →

Hackaday Links: January 27, 2019

January 27, 2019 by Brian Benchoff 15 Comments

Once again, Uber found a company to build their ‘air taxis’. This time it’s Boeing. While there are no details on the Boeing bird, I’m going to propose again that Uber buy the Santa Monica airport as a hub for their air taxi program; SMO is going to be shut down anyway, and this is the funniest reality that can come from the idea of an ‘air taxi’ program.

According to ancient astronaut theorists, one of the bigger problems with full-time tech YouTubers (think Dave and Fran here) is the insistence that YouTube suggests conspiracy theory videos as a related video. If you do a video teardown on Apollo flight hardware, you’re going to fall into the same category as people who believe the moon is hollow, people who believe the moon landing was faked, and recently, flat-earthers. This is a ‘bad move’ by YouTube because the Venn diagram of people who want to watch conspiracy videos and people who want to watch teardowns is two circles. It makes community engineering hard, and you get a lot of idiots on YouTube comments. YouTube is now changing the recommendation algorithm. There are other reasons YouTube is doing this, specifically relating to videos that aren’t about weird electronics, but we’re not going to talk about that here, thx.

This week was Winter NAMM, the National Association of… music, something something. That means you can go to Anaheim and check out all the musical instrument related stuff that will be released this year. Think of it as CES, only you don’t get the flu and want to murder everyone, and it’s about guitars and synths instead of Alexas duct taped to Roombas. Here’s what it was like last year, with the tl;dr being a wall of cabs, Euroracks everywhere, and the best way to get started in the industry is to buy some old trademarks, not by actually designing something new. Speaking of, here are some Kay reissues.

So, what’s cool at NAMM this year? Let’s do guitars first. Gibson’s 2019 lineup is not dumb, a reversal of the previous twenty years; There’s a Les Paul Standard with humbuckers or P90s, and there’s a TV Junior. Fender? There’s an acoustasonic Tele that was terrible the first time around, and it’s decidedly not terrible. The Electric XII is back, finally, ~~and it’s even cooler than the Electric Six~~ wait never mind it has a 1 11/16th nut. There is no Tele Plus with a Honda Goldwing emblem, but we make do with what we can. The pyramids are upside-down. Buy a dookie pedal.

How about some synths? Behringer is cranking out another clone, this time an Oberheim OB-Xa. Word on the street is that a 303 is on the horizon, but the vocoder is out now. The Odyssey exists, and the SH-101 clone comes with a handle so you can keytar it. Guitars with Raspberry Pis? Could it be? Yes, Lucern Custom Instruments is collaborating with Tracktion to put a synth in a guitar. There’s a touchscreen BioTek 2 synth installed below the bridge. It’s like something [Matt Bellamy] would play, but it’s got a Raspberry Pi.

Elektron has a new sampler. Oh my god, the only way to make money in the instrument industry is to buy up trademarks. Well, trademarks and signature amps and guitars. Speaking of, where’s the signature Vangelis synths?

The news that will have the biggest impact a decade from now is the announcement that MIDI 2.0 is getting ready for release. New features include auto-config with DAWs, extended resolution, and expressiveness (to stop the Western hegemony on electronic music), and backward compatibility with MIDI 1.0.

This isn’t explicitly NAMM-related, but Eurorack is now a thing and [Jan] is always coming up with some interesting synths-on-a-chip. This time, it’s a drum machine in a Eurorack format. Is it based on anything? Not really, although it would go well in any Detroit acid track. Check out the video.

How To Deal With A Cheap Spectrum Analyzer

January 25, 2019 by Brian Benchoff 14 Comments

The Hackaday Superconference is all about showcasing the hardware heroics of the Hackaday community. We also have a peer-reviewed journal with the same goal, and for the 2018 Hackaday Superconference we got a taste of the first paper to make it into our fully Open Access Journal. It comes from Ted Yapo, it is indeed a tale of hardware heroics: what happens when you don’t want to spend sixty thousand dollars on a vector network analyzer?

Ted’s talk begins with a need for a network analyzer. These allow for RF measurements, but if you ever need one, be prepared: you can spend twenty thousand dollars on a used VNA. Around the time Ted’s project began, Rigol released their cheap spectrum analyzer, the DSA815. This thing only cost a thousand dollars. It was their first revision of the hardware, and it was only a scalar network analyzer. Being the first revision of the hardware, there were a few problems; there was leakage that would affect the measurement. The noise floor was higher than it should have been. These problems can be corrected, though, with a little bit of cunning from Ted:

Continue reading “How To Deal With A Cheap Spectrum Analyzer” →

Circuit VR: Redundant Flip Flops And Voting Logic

January 25, 2019 by Al Williams 8 Comments

We are somewhat spoiled because electronics today are very reliable compared to even a few decades ago. Most modern electronics obey the bathtub curve. If they don’t fail right away, they won’t fail for a very long time, in all likelihood. However, there are a few cases where that’s not a good enough answer. One is when something really important is at stake — the control systems of an airplane, for example. The other is when you are in an environment that might cause failures. In those cases — near a nuclear reactor or space, for example, you often are actually dealing with both problems. In this installment of Circuit VR, I’ll show you a few common ways to make digital logic circuits more robust with some examples you can run in the Falstad simulator in your browser.

Continue reading “Circuit VR: Redundant Flip Flops And Voting Logic” →

Hackaday Podcast 003: Igloos, Lidar, And The Blinking LED Of RF Hacking

January 25, 2019 by Mike Szczys 8 Comments

It’s cold outside! So grab a copy of the Hackaday Podcast, and catch up on what you missed this week.

Highlights include a dip into audio processing with sox and FFMPEG, scripting for Gmail, weaving your own carbon fiber tubes, staring into the sharpest color CRT ever, and unlocking the secrets of cheap 433 MHz devices. Plus Elliot talks about his follies in building an igloo while Mike marvels at what’s coming out of passive RFID sensor research.

And what’s that strange noise at the end of the podcast?

Take a look at the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Direct download (60 MB or so.)

Continue reading “Hackaday Podcast 003: Igloos, Lidar, And The Blinking LED Of RF Hacking” →

Resurrecting An Amiga 500+

January 25, 2019 by Zoe Skyforest 37 Comments

Recently, I was lucky enough to receive a big haul of retro computer gear from a friend who was emptying out his garage. Even better, the haul was almost entirely old Amiga gear — my favorite computing platform of all time. Upon returning home, I gleefully sorted through the boxes, powering things up one by one. Amazingly, everything worked… except for one lonely Amiga 500+. I was greeted by a dull grey screen. This wouldn’t do, so naturally, I got to work.

It seemed like a shame to be opening the machine, as after almost 30 years of life, this one still had its warranty seal intact. Regardless, nothing ventured, nothing gained – the Torx bits were at hand and the screws were coming out.

Continue reading “Resurrecting An Amiga 500+” →

Samy Kamkar’s LED Balloon Network

January 24, 2019 by Jenny List 8 Comments

Writing this in the frigid darkness of a Northern Hemisphere January evening, I have to admit to more than a little envy of Samy Kamkar and his friends. One of their summer events is a private party at a secluded campground somewhere that looks quite warm, which from here seems mighty attractive.

Samy wanted to provide a spectacle for his friends. What he came up with is glowing orbs; LED balloons that would float above the campsite and wow his friends with their pretty synchronised illumination. Thus an adventure in wireless communications, lighter-than-air flammable gasses versus electronics weight calculations, and code optimization began, the details of which were shared in Samy Kamkar’s 2018 Hackaday Superconference talk embedded below.

Continue reading “Samy Kamkar’s LED Balloon Network” →