Cellular Automata And LED Matrix Fun

October 28, 2008 by Caleb Kraft 7 Comments

Blinkomat, an LED matrix, turned out quite well. 240 LEDs controlled by an Atmega 16 is what we call a decent bookshelf decoration. The dimensions of 12×20 were chosen due to the fact that the microcontroller has 32 I/O lines. The LEDs are switched on and off using multiplexing. The brightness, controlled by pulse width modulation can be varied by 16 levels. The overall effect is quite smooth an fun to look at. He has programmed it to do other things than just cellular automata. Our personal favorite is a simple sine wave. Watch it after the break.

Continue reading “Cellular Automata And LED Matrix Fun” →

Interactive Touch Capable Mirror

October 24, 2008 by Kimberly Lau 34 Comments

[vimeo http://vimeo.com/1867956%5D

[Alpay Kasal] of Lit Studios and [Sam Ewen] created this patent-pending interactive mirror after being inspired by dielectric glass mirrors with built-in LCD panels, and wanting to add a human touch. The end results look like a lot of fun. You can draw on the mirror and play games. According to [Kasal], mouse emulation is essential. The installation features proximity sensors and gesturing. Any game can be set up on it, which makes the possibilities endless… except these are the same people that built LaserGames so expect no further documentation about how it works.

[via NOTCOT.ORG]

-hard PlAYer- 8 Bit Tunes Hardware Player

October 22, 2008 by Kimberly Lau 4 Comments

[youtube=http://www.youtube.com/watch?v=zgb_NFdTHZc]

For people who miss the golden age of Atari music, you can recreate the magic of 8 bit music with the -hard plAYer-. [Tolaemon] put a lot of thought and work into this hardware player. From the AY-38912 programmable sound generator, which used to be in old computers like the Atari or Colour Genie, to working with the YM file format, each piece is put together with the utmost care. [Tolaemon] also provides his design, firmware(ZIP), and parts list so that you can make your own hardware player.

[via Matrixsynth]

Björk Teaches You About Electronics

October 20, 2008 by Eliot 89 Comments

[youtube=http://www.youtube.com/watch?v=75WFTHpOw8Y]

As we often suspected, [Björk] is quite the technical mastermind. In the video above, she teaches you about the ins and outs of her television. We think she’s making a strong bid as the next person to join Prototype This! Her hacking philosophy is the same as ours: “You shouldn’t let poets lie to you.”

Jar Of Fireflies

October 18, 2008 by Eliot 14 Comments

[Randomskk] has been attempting to make electronic fireflies for quite some time and finally settled on a design he liked. His jar of fireflies uses an ATtiny13 to control a set of 12 matrixed LEDs. The green SMD LEDs are each soldered to a pair of thin wires that hang down into the jar. The software picks an LED at random to flash and then flashes it 1-3 times. The random seed is incremented each time the jar is turned on, so you’ll get 255 different patterns. The power is just a standard coin cell. The project is fairly simple electrically, but the LED soldering could prove difficult. It was inspired by this firefly jar project. Check out [Alex]’s synchronizing fireflies too. A video of the jar is available below. Continue reading “Jar Of Fireflies” →

Free Laundry

October 12, 2008 by Eliot 52 Comments

While waiting for his clothes to dry, our reader [xaio] decided to poke around and see how his building’s coin laundry system worked. It turned out to be ridiculously simple. All he needed to do was jumper the cable coming from each machine and they’d run without issue. We wonder why the relay box is so big. In any event, it could certainly benefit from a more secure installation.

Wireless Accelerometer Controlled RGB LED

October 9, 2008 by Caleb Kraft 10 Comments

[Andlier] sent us this cool little project. He has built a wireless accelerometer controlled RGB LED lighting system. Based on what a mouth full that is, it sounds complicated right? The end result looks fairly intuitive. Simply pick up the controller and tilt your hand to change the color of the light.

The controller consists of an Atmel AVR168 microcontroller. He doesn’t specify what transceiver he is using, but if you look in the comments, he notes that he added an antenna to it to extend the range. The part that controls the LED is based off of an Atmel AVR169 microcontroller hooked to some shiftbright LED modules.

Continue reading “Wireless Accelerometer Controlled RGB LED” →