R/C Lawnmower

November 14, 2009 by Caleb Kraft 56 Comments

FJI64OAG1XBRNEO.MEDIUM

[Johndavid400] built this incredible looking R/C lawnmower. After spending some time repairing broken R/C cars, he wanted to move on to something a little more useful and powerful. He decided to build a mower. He’s using a transceiver set from ebay, with an Arduino interpreting the signal and outputting to his custom motor board. In the video after the break, you can see that the mower looks responsive and quick. He does note, however, that he had some glitches early in the process that left him with a runaway mower. We covered a very similar mower ages ago that used a wheelchair as the base.

Continue reading “R/C Lawnmower” →

AWE: A Robotic Wall

November 9, 2009 by Caleb Kraft 50 Comments

[youtube=http://www.youtube.com/watch?v=CaMuS3wZ-bM]

AWE is an interesting project, where your office wall is a helpful robot. That’s the goal anyway. The wall is articulated and can reconfigure its shape to fit your needs. You can see in their video that they have come up with several specific uses for AWE at different positions. We want to like AWE, we see that there is potential there. The video hasn’t won us over, there just wasn’t enough added benefit over a simple setup like a projector mount. We think the real benefit just isn’t as obvious. When we saw the girl stand up, and the wall back away intuitively, our attention was regained. What potential uses do you guys see?

[via BotJunkie]

Cold Cathode Art Piece Controller

November 6, 2009 by Mike Szczys 5 Comments

cold-cathode-art-piece-controller

[Andrew] built a light box for an exhibition last year that displayed different colors statically. After showing it off, it went unchanged but future improvements remained in the back of his mind. Recently, he pulled it out again and hacked together a controller to drive the colors individually.

He’s actually reusing some of the hardware he built for a different project. At its core is a PIC 16F628 that actuates the lights using relays. In this case, only four of the eight on the board are used to control red, white, blue, and green cold cathode tubes. The video after the break shows the device randomly rotating through different patterns. This is a nice start to making the piece more interactive and we can image adding web-controlled color changes, or perhaps some Daft Punk inspired functionality.

Continue reading “Cold Cathode Art Piece Controller” →

Laser Etching Fruit

November 5, 2009 by Caleb Kraft 22 Comments

laserlable-ed02 (Custom)

Ever annoyed by those pesky stickers on your fruit? They never seem to pull off in one piece and they always leave a little glue behind. Well, the industry might be moving away from them in favor of laser etching each piece of fruit. They are using a low energy carbon dioxide laser to etch the skin. The FDA is in the final stages of approval for using this in the states. It is already in use in New Zealand. We might find this a bit weird, but we’ve seen weirder.

[via slashdot]

Automated Coffee Bean Roaster

November 5, 2009 by Caleb Kraft 29 Comments

FNY8R8HG1BBDPQ9.MEDIUM

We’ve featured several different ways to roast coffee beans over the years. This is the next logical step. [Nightlife31] shows us how to use an Arduino and a popcorn popper to create a fully automated coffee bean roaster. You’ll have to modify your popcorn machine to be controllable. This means installing your temp sensor and relays. You can see a basic schematic for that in the project page. The rest involves making a fairly simple circuit on an Arduino protoboard attachment. The end result is quite nice. We wouldn’t mind waking up to some freshly roasted coffee beans in the morning. We’ve seen these done with PID controls, and directly controlled by a computer. There’s even this one that has a much more involved build with a convection oven mounted on top instead of a popcorn popper.

Easy Dial Telephone

November 1, 2009 by Mike Szczys 30 Comments

easy-dial-phone

[Taufeeq’s] Grandmother needed to be able to call her family members but due to ailing eyesight and memory this was a difficult task. He decided to help her with this by building a telephone that will auto-dial a number at the push of a button. [Taufeeq] built a case to hang on the wall which houses a hook for the receiver and two auto-dial buttons. The buttons are lighted and loosely based on the LED push buttons we covered in January. Housed in a separate box are a microcontroller and a dual tone multiple frequency IC used to dial the numbers. These are patched into a PCB from a standard telephone.

The result looks great and makes using the phone much easier with the simplified controls. We’ve included the demonstration video after the break.

Continue reading “Easy Dial Telephone” →

Arduino “python” Integration

October 30, 2009 by Phil Burgess 9 Comments

vivarium

[Cyberspice] informs us she likes snakes. Hey, who doesn’t? She’ll soon be adopting a lovely ball python and wanted to keep close tabs on the sensitive creature’s environment. To that end she assembled a network-enabled vivarium monitoring system based on Adafruit’s Boarduino (a minimalist Arduino clone), a TMP36 analog temperature sensor, Saelig’s WIZ810MJ Ethernet interface, and a common LCD screen. The Arduino rig periodically issues updates to a web server, which can then generate informative graphs using a set of PHP scripts (what, no Python?).

Okay, so we could probably count on one hand the number of readers in need of fancy reptile monitoring and still have fingers left over. There are countless other applications where networked sensor monitoring of this sort is a frequent necessity, so the article could be a good starting point for your own projects. There’s lots of source code to work with, on both the Arduino and web server sides. And the parts list demonstrates serious frugality: the Boarduino, the generic LCD, and especially the Ethernet interface; even with the breadboard adapter, this unit is about half the cost of the usual Arduino Ethernet shield, leaving more funds available for the snake food budget!