Input Device Using LED And Four Photoresistors

September 22, 2010 by Mike Szczys 38 Comments

[Julien] built an input device that uses reflected light detected by some photoresistors. Placing your hand above the device will reflect light from the LED back down onto the cadmium-sulfide sensors. The resistance of those sensors is read by four ADC pins on a Teensy microcontroller and translated to mouse movements. In the video after the break you can see that this works rather well in controlling the cursor. The source code is available on pastebin but we’re also going to host the code for posterity.

Continue reading “Input Device Using LED And Four Photoresistors” →

PlayStation 3 Exploit Using A TI84 Calculator

September 10, 2010 by Mike Szczys 27 Comments

[Brandon Wilson] came up with a way to exploit the Play Station using a TI84 calculator. This uses the same PSGroove open source code that we looked at last week. That package was running on the Teensy, which is currently sold out (we’d guess because people want to run the exploit). There’s a video demonstration of this new trick after the break. The calculator connects via a USB A to USB mini-B cable which comes with the calculator and is also used to charge the PS3 controllers. Once the connection is made, launch the software on the calculator, power cycle the PS3, and turn it on with the familiar power-eject button presses. The only problem with the system is that the calculator needs to be connected every time you boot.

Continue reading “PlayStation 3 Exploit Using A TI84 Calculator” →

Making A Smaller Keyboard

August 31, 2010 by Mike Szczys 44 Comments

The keyboard on [Marek’s] laptop stopped working. He didn’t want to buy a replacement so he decided to start using an external keyboard. But hauling around a full 104-key model is a bit of a pain so he decided to make himself a shorter keyboard. He basically chopped off the 10-key pad on the right side of the board. This had the unexpected consequence of removing the screws that hold the top and bottom of the case together so he ended up adding a few extra screws to shore it up. You may be wondering how the key matrix still works if a portion of it has been cut off. [Marek] used the simple trick of folding the extra part of the membrane over and covering the unused contacts with some tape.

If you try this you should consider getting rid of the directional arrows and editing keys as well. There must be a way to map those keys elsewhere. Perhaps the half-qwerty keyboard hack will give you some inspiration for that.

Arduino Based Thermal Printer

August 30, 2010 by Mike Szczys 42 Comments

[Manuel] built his own thermal printer based around an Arduino. We’re a bit confused about the parts, his webpage specifies an EFA-1019HW2 print head but the bill of materials on his github shows EPT-1019W2. We can’t find a source for either product number, but we did find similar thermal line printers for as low as $32.00. The controller boards on the other hand look to be around $150 so building your own is a definite win. [Manuel’s] version can print 96 points and has a font set that prints 32 characters per line. Check out the video after the break and let us know if the noise of the print head is a deal killer for you.

Continue reading “Arduino Based Thermal Printer” →

USB Typewriter

August 30, 2010 by Caleb Kraft 25 Comments

clickety-clackity-clickety-clackety-DING

[Jackzylkin] has posted an instructible showing, in detail, the process of creating a USB typewriter. He takes us through the process of disassembling the typewriter, mounting all the sensors where the little hammers strike, and wiring it all up to a custom board to interface with the computer via USB. While he is selling the board, the schematics are available if you want to build your own. We think the clickety-clack of a real typewriter could be very satisfying to the touch, though it might drive your co workers insane. The younger ones might also quiz you as to what that archaic machine is. We’ve actually seen this done before, way back in 2005.

Microsoft Engineers Reinvent The Optimus Keyboard

August 20, 2010 by Mike Szczys 46 Comments

Looks like Microsoft has come up with a pretty slick little keyboard. It’s very much like the Optimus, which has an OLED screen in every key, except that it doesn’t have a screen in every key. Instead there’s just one screen on the whole unit and they keys have been overlayed on top while allowing the image to show through. Brilliant really, since this should drastically reduce the $2400 price tag of the original. That is, if you could buy the device. Microsoft’s not selling this hardware (yet anyway), but offering it up as test hardware for the UIST Innovation Contest. It will be interesting to see what the students come up with. This keyboard should be easier to program for since it involves manipulating just one screen. There is also extra space at the top that is touch-sensitive. See for yourself after the break.

Continue reading “Microsoft Engineers Reinvent The Optimus Keyboard” →

Brain Wave Skimming On The Go

August 16, 2010 by James Munns 16 Comments

Mentok: The Mind Taker

Master EEG hackers [MOG] and [Tim] over at the Makers Local 256 have been working on creating a Bluetooth EEG listener made from a Mattel Mindflex. This build is based on an earlier build of a group called [Frontier Nerds] (thanks for the heads up [Nathan]!), but this version ditches the Arduino in favor of a basic serial to bluetooth adapter for the sake of power efficiency (as well as not having to keep an Arduino strapped to you head). We have covered a few Mindflex hacks before, but this seems to be the most useful in a practical sense. They have included the code for a Bluetooth serial data logger, and the earlier build shows a good example of captured data visualization.