Robots Hacks

2421 Articles

Rubik’s Solver Uses FAC Machine Building System

September 15, 2015 by 9 Comments

We love a good Rubik’s Cube solver and the mechanical engineering on this one is both elegant and functional.

This is the first time we remember hearing about the FAC system, which is a standard set of parts which can be used to make any number of mechanical systems. [Wilbert Swinkels] must be a master with the system; the layout of the machine appears simple and uncrowded despite the multiple degrees of freedom built into it. Those include an insertion platform for getting the cube in and out, a gantry for three color sensors, and two axes (three grippers in all) for doing the actual solving. If you’ve used FAC before we want to hear what you think of it in the comments.

[Maxim Tsoy] handled the software which runs on a Rapsberry Pi Compute module. You’ll want to watch the demo video below. First you place the randomized cube on the insertion platform which retracts after the cube is in the grasp of the grippers. These work in conjunction with the color sensor gantry to scan every side of the cube. After a brief pause to compute the solution the grippers go to work.

It is possible to build a solver with just two swiveling grippers. Here’s a really fast way to do it.

Continue reading “Rubik’s Solver Uses FAC Machine Building System” →

Kids And Hacking: Blind Robotics

September 10, 2015 by 21 Comments

If you are a Hackaday reader, it is a good bet that when you were a kid there was some adult who infected you with the madness you have for science, engineering, tinkering, or whatever it is that brings you here. Maybe it was a parent or a teacher. For many of us, it was a local ham radio operator. But it was probably someone who had the passion for this kind of thing and you caught it.

Paying that debt forward can be very rewarding. Schools and youth organizations are always looking for people to share their passions with kids and at the right age and the right school, you could be that one push that moves a kid off a bad path.

Continue reading “Kids And Hacking: Blind Robotics” →

3D Printed Kinetic Art

September 10, 2015 by 2 Comments

Artificial muscles and soft robotics don’t get the respect they deserve, but [mikey77] is doing some very interesting work with artificial muscles that can be made on just about any 3D printer.

Like other artificial muscles and soft robotic actuators we’ve seen – like this walking sea slug and this eerie tentacle – [mikey77]’s muscles are powered by air. Instead of the usual casting method, he’s printing these muscles from Ninjaflex, a flexible plastic that is compatible with most 3D printers.

As they come off the printer, these 3D printed pneumatic muscles leak, and that means [mikey77] has to seal them. For that, he created a sealant out of Loctite fabric glue thinned with MEK. The addition of MEK dissolves the outer layer of Ninjaflex, allowing the glue to bond very, very well to the printed muscle.

So far, [mikey77] has created a pneumatic flower that blooms when air is added. He’s also created a muscle that can lift more than four pounds of weight with the help of a 3D printed skeleton. It’s a great way to experiment with flexible robots and pneumatic muscles, and we can’t wait to see what weird creatures can be created with these actuators.

Thanks [Lloyd] for sending this one in.

SAM Brick Layer

Brick Laying Robot Does It Better

September 7, 2015 by 60 Comments

Meet SAM, the Semi Automated Mason. SAM can lay bricks three times faster than a normal brick layer. SAM isn’t planning on taking away any jobs yet though — it still needs a human mason following behind to clean up the mortar.

The robot consists of a standard 6-axis industrial robot arm mounted to a track system with a conveyor belt style feeder of bricks. It picks up each brick, covers the side with mortar, and places it next to the last brick it laid. A mason still has to do the tricky parts, like corners and aesthetics — but SAM is getting better — it can very easily follow a pixelated map of an image and place bricks up to half an inch in or out from the wall, to create a embossed image.

Continue reading “Brick Laying Robot Does It Better” →

CubeSat Challenge Winners Show Interesting Design Approaches

September 6, 2015 by 12 Comments

The winners are in for the GrabCad CubeSat Challenge, which asked designers to rethink the way that CubeSats are built. These tiny 10 cm square satellites are the hot thing in orbit, and the competition was looking for new ways to build and pack more into this tiny space. The winners offered some fascinating new approaches to building CubeSats, and some excellent design lessons that anyone can use.

The winner was FoldSat, by [Paolo Minetola]. His excellent design is a 3D printed folding case for a satellite that is built from just two 3D printed parts. The case can be snapped together and offers multiple ways to mount electronic components and sensors inside. [Paolo] estimates that it could save 40% time and 30% materials from existing CubeSat casings, which means more space inside and more time to build. It is an excellent example of how 3D printing can make things cheaper, easier and better, all at the same time.

Continue reading “CubeSat Challenge Winners Show Interesting Design Approaches” →

Sphero Wasn’t Actually Behind The BB-8

September 4, 2015 by 26 Comments

Despite quite a few articles stating Sphero was behind the technology that made the real movie BB-8 droid, like this Tech Crunch article:

Sphero, makers of the eponymous spherical robots that you control with your smartphone — as well as the new BB-8 droid in Star Wars: The Force Awakens…

and this excerpt from Fortune Magazine:

The same underlying technology (made by Sphero), which was licensed to create the version of BB-8 that graced the stage at the Star Wars Celebration…

Heck, even we drank the jungle juice with our original coverage! But now it seems the truth is finally coming out. As it turns out, it was actually built in Pinewood by the Creature Animatronics (CFX) team which includes [Matt Denton] — He’s the guy who built the Mantis Robot. A hacker / engineer — not a big toy company.

Two articles released this week on StarWars.com and EmpireOnline.com name various people from the CFX team at Pinewood as having built the movie puppets and the real BB-8. No mention of Sphero at all of course. They also state that they had to come up with the technology from scratch and that nothing like it already existed.

Continue reading “Sphero Wasn’t Actually Behind The BB-8” →

Transformers, Birthday Cakes In Disguise

September 1, 2015 by 5 Comments

[Russel Munro] decided to go all-out for his son’s birthday cake: he made a Transformers robot cake that, well, transforms from a truck into a robot, Optimus Prime style. His impressive build has the actions of the original: first, the front rears up to lift the head, then the back lifts to form the body and the head and arms pop out of the top. Underneath the thin fondant exterior is a 3D printed body, driven by a mechanism in the base. He used fishing line to lift the parts, which is pulled by a motor salvaged from a CD player, being driven by an EasyDriver board from Sparkfun.

The main issue he had to overcome was weight: apparently he underestimated the weight of the fondant that covers the cake, and had to do some last-minute work to strengthen the drive mechanism, and skip plans for the more ornately decorated version that his wife had planned. But the look of glee on his son’s face when he operates it at the party is the best bit. In these days of CGI and computer games, it is good to remind the kids that there is still a lot of fun to be found in ingenuity and liberal quantities of hot glue.

Continue reading “Transformers, Birthday Cakes In Disguise” →