NXT Turing Machine

November 30, 2009 by Jake W 20 Comments

[youtube=http://www.youtube.com/watch?v=cYw2ewoO6c4]

This interesting use of Lego popped up on the mailing list of the University of Bergen. Build by a group of Norwegian Danish students, it’s a simple computer that implements Alan Turing’s design from 1937. Having both read and write functions, it implements its own (somewhat inefficient) medium of non-volatile memory. What we find interesting is that rather than move the ‘tape’ through the machine, the machine rolls over the tape. Thanks to [Thorsten] for the tip.

Digital BMXing Through San Francisco

November 25, 2009 by Caleb Kraft 3 Comments

[Alpay] sent in this project he did recently. He was hired to produce a kiosk that would stand out to the kids at the event. He chose to make a bike riding game utilizing open source hardware and software. There was some thought put into what interface to use to make it easiest for people to just pick up and use. The ultimate decision was a simple one. Use real handle bars from a bike. As for software, they used Blender, the open source 3d creation program. The actual control is done via a pair of Arduinos, an accelerometer, and a pair of XBee modules.

He notes that blender is fully capable of accepting the serial input from the controller, but they opted to have the controller mimic keystrokes to make life easier on the developer, as well as make the controller usable on more games. Maybe if enough people ask really nice, he’ll release the source code for the controller.

Hack A Sketch

November 24, 2009 by Caleb Kraft 24 Comments

[vimeo = http://vimeo.com/7367464%5D

Sometimes we miss that old Etch a Sketch we had when we were kids. The challenge of producing a decent image using those two knobs was always fun and frustrating at the same time. This project lets us recreate this interface on our computer. The Hack a Sketch is a combination of an Etch a Sketch style input and a processing sketch to recreate the experience. They’re using an Arduino to interpret the inputs and feed it to the computer via USB. We really like this thing. Simplify the electronics and we could see this as a neat toy for sale somewhere like Thinkgeek.

[via hacked gadgets]

Complete The Maze, Get A Gumball

November 19, 2009 by Caleb Kraft 21 Comments

[youtube=http://www.youtube.com/watch?v=kcj9Sdiohog&w=470]

This neat accelerometer controlled marble maze adds a level of fun to retrieving a gum ball. You have to first navigate the maze using a controller that has a dual axis accelerometer in it to control the angle of the platform. Though that does look like a wii accessory, there is no wiimote in there. Only after you have completed it will the gum ball machine dispense the candy. [Dan] constructed everything himself, which might explain the lack of “pits” for the marble to fall into in the maze.

More details on the build and source code are available on his page.

[via hacked gadgets]

R/C Airplane Motors From Computer Trash

November 17, 2009 by Caleb Kraft 18 Comments

Here’s something that the R/C airplane crowd might think of as old news. These directions show us how to rework floppy drive and CD Rom motors to be high power airplane motors. There are several listed, with details on each, but those unfamiliar might want to start with the most basic CD Rom version. It covers winding your own copper and installing the magnets in the “bell”, putting it all together and mounting it. This is a great writeup for those who haven’t seen this done before. If you want something even simpler though, you might enjoy the homopolar motor post. If you’re more advanced, they have tips for you too on machining and balancing the motors as well as winding density.

Set Phasers To “blind”

November 12, 2009 by Mike Szczys 30 Comments

[Directive0] added a 200mW laser to his Enterprise Phase Pistol toy. This joins the ranks of hand-held laser hacks that we’ve seen around here lately. His build makes use of the stun and kill settings of the toy to switch between different modes. The built-in 9 volt battery holder is tapped into for power. When set to stun, the stun LED indicator is illuminated and a trigger pull sends current limited electricity to the laser diode. When the kill (or blind) setting is selected, the appropriate LED is illuminated and the trigger sends the full current from the battery to the laser diode. Power regulation is managed by the driver circuit for the laser.

This build preserves the unmodded look of the toy gun. [Directive0’s] inclusion of protective glass should fend off the warnings we usually see in the comments of these types of hacks.

MindFlex Teardown

November 7, 2009 by Nick Caiello 36 Comments

Maybe we’re just imagining things, but it seems to us like brainwave control is the latest trend in toys. Similar to Uncle Milton’s Force Trainer, Mattel has recently released the MindFlex, a game that involves moving a plastic ball up and down through an obstacle course that you control using your brainwaves. Naturally when [Alpha] saw this, he decided to take it apart and document what he found. After disassembling both the headset and the base, he found that most of the chips were covered in black resin making them unidentifiable. However, he was able to find identify one chip, the NeuroSky TGAT1-L64 D498Q-010 0924. Judging by the name alone, we would guess that this is the chip that makes the brainwave control possible. While there’s no mention as to whether you’ll be able to interface with this like you can with the Force Trainer, we’re sure that it’s only a matter of time before someone figures out how to use this to control more than just a floating plastic ball.