E-bike Across Canada For $10

August 19, 2009 by Mikey Sklar 29 Comments

Justin Lemire-Elmore E-bike

[Justin Lemire-Elmore] spent one month riding his electric bike across Canada last summer. He made the journey from Vancouver to Halifax in 30 days using a mere $10 worth of electricity to recharge his bike. He put together a rather bizarre looking semi-recumbent bicycle to hold all of his gear. The motor controller, charge controller, battery packs, and lighting system were all his own design. He has a captivating 2 hour presentation embedded below in which he describes all the problems he had with his equipment during the trip as well as all the great experiences the journey offered. Continue reading “E-bike Across Canada For $10” →

OmniDirectional Research Platform

August 8, 2009 by Eliot 11 Comments

[youtube=http://www.youtube.com/watch?v=-bcoAqKhdL4]

[Shachar Geiger] sent in an interesting project that he worked on with [Tal Avivi] at the Bezalel academy in Jerusalem. They were given the task of designing a 1-person electrical urban vehicle. They took some cues from MIT’s Transology and designed the OmniDirectional Research Platform (ODRi). There’s a video of it embedded above. It can be driven using three different input styles: an accelerometer joystick, a traditional gamepad, or body mass shift. They started with an Arduino, but needed more I/O and had to switch to a Wiring board (this was before the Mega). The platform is built mostly from scrap. The accelerometers were placed in an old Microsoft Sidwinder. The standard joystick is from a Sega Mega Drive. The weight sensors are out of cheap home scales.

Black Hat 2009: Parking Meter Hacking

July 30, 2009 by Eliot 53 Comments

For day two of Black Hat, we sat in on on [Joe Grand], [Jacob Appelbaum], and [Chris Tarnovsky]’s study of the electronic parking meter industry. They decided to study parking meters because they are available everywhere, but rarely considered from a security perspective.

Continue reading “Black Hat 2009: Parking Meter Hacking” →

Vacuum Gloves For Climbing Buildings

July 25, 2009 by Zach Banks 22 Comments

spiderman

Suction is incredibly powerful and can be put to use in several different ways. [Jem Stansfield] built a set of vacuum gloves for a BBC TV series to show how powerful suction really is. He climbed up the side of a 100 foot building, yet had to rely on his safety line near the top. The video of his daring ascension after the jump.

Continue reading “Vacuum Gloves For Climbing Buildings” →

Integrated Steering Wheel Radio Controls

July 15, 2009 by Caleb Kraft 4 Comments

van-pioneer (Custom)

[Graham] bought a new stereo for his Peugeot 406. Unfortunately, the built in radio controls in his steering wheel didn’t interface directly with the head unit, but rather with the vehicle itself. His solution was to build a device to decode the button presses and send them to the head unit in the appropriate fashion. All source code and schematics are available on his site. He states that this should work on any PSA/Renault vehicle with a 125Kb VAN bus. We’re curious how similar some of the American systems are. We have seen something similar where someone wanted to control their Zune from the steering wheel.

Chainsaw Powered Bicycle

July 11, 2009 by Gerrit Coetzee 37 Comments

chainsawbike

We’ve covered weed whacker bicycles before and you can even buy 66cc conversion kits now. [geoff390] posted a few videos over on YouTube about another motor option. In the first video embedded below, he goes over the basic parts of his bike. The chainsaw motor is mounted to the side of the back tire and a metal drive wheel extending from the chainsaw shaft makes contact with it. The motor assembly is mounted on a hinge and the friction between the drive wheel and the back tire is adjusted with a turnbuckle. He posted a more detailed second video in which he goes over some of the finer details of the bike and some of the issues he’s had. Continue reading “Chainsaw Powered Bicycle” →

Cheap Cup Holder Laptop Tray

July 11, 2009 by Gerrit Coetzee 52 Comments

bigfront

[Michael Davis] sent in his homemade laptop tray. He does a lot of traveling in his Toyota Tacoma and was looking for a good way to mount his laptop inside. Unfortunately, [Michael] soon discovered that commercial laptop trays can be very expensive and difficult to install. He saw an opportunity in the empty cup holder in his car. Fifteen dollars worth of PVC pipe fittings and a piece of plywood later he had a laptop tray.