Touching Conversations: Email Snippets Scroll By On Electro-Embroidery Piece

December 19, 2013 by Kristina Panos 6 Comments

[Wei Chieh Shih] really moves the needle when it comes to wearable technology. His textile design project entitled I Am Very Happy I Hope You Are Too is a striking marriage of masterful hand embroidery, delicate circuitry, and careful programming.

[Wei] is using an Arduino micro to drive a matrix of surface-mount LEDs in the Hello, World video, which is a ramp-up to the scrolling text version that’s ~~in progress~~ now finished. That full version is part of his residency project at Arquetopia in Oaxaca, Mexico and displays snippets of emails from his past relationships. It’s huge, with multiple matrices as large as 8×25 pixels!

No build notes could be found for this or any of [Wei]’s similar projects, like this awesomely dangerous 200 laser diode jacket or this eerily beautiful light installation on Taiwan’s north beach. Based on the pictures, our speculation is that he is using ordinary 6-strand embroidery floss to make stem or half cross-stitches on all the paths. He then runs very thin, flexible conductor underneath the channel of stitches and solders the wires to the component pads.

If [Wei] wants another way to wear his heart on his sleeve, he could investigate these dynamic LED clothing hacks.

Update: [Wei] has completed this project, and has more information available at his Behance site.

Continue reading “Touching Conversations: Email Snippets Scroll By On Electro-Embroidery Piece” →

Disrupting Advertisement Agency Workers With Electric Shocks

December 18, 2013 by Mathieu Stephan 24 Comments

We hope this project will make you laugh as much as we did. For 4 hours, some Australian advertising executives agreed to be subjected to Electric Muscle Stimulation (EMS) controlled by people from all over the globe watching their reaction over the Internet. The public could disrupt their day with a click of a mouse. The user simply needed to go online, choose a live stream, click the ‘Disrupt’ button and watch as the EMS instantaneously zapped the volunteers. For each ‘disruption’, the company donated $1 to a local community.

The EMS hardware was designed to deliver up to 60V pulses and controlled using the MIDI protocol. The platform is powered by 8 AA batteries and receives zapping commands via UDP. Unfortunately, the resources can’t be found on the project’s webpage, but you can still have a look at the two videos embedded after the break. The total amount donated during this experiment was $5500!

Continue reading “Disrupting Advertisement Agency Workers With Electric Shocks” →

Cellphone Charging Inductive Purse

December 3, 2013 by James Hobson 29 Comments

projects_cell-phone-charging-purse-00

For whatever reason, cell phone companies really don’t seem to care about giving you a good battery for your phone. Here’s a great hack if you happen to have a purse — turn it into an inductive charger! Manpurses count too, we’re not judging.

[Becky] from Adafruit came up with a great idea for this wearable hack. If your phone is sitting in your purse for long periods of time, why not charge it? It’s a pretty simple hack that makes use of a pair of inductive charging loops. One is hidden inside the bottom of your bag of choice, and the other mounted to a fixture at work or home. She’s using magnets to snap her purse into place on a shelf at work — this ensures the coils line up so the full rated charge can be transmitted.

Another option is to put the entire inductive charging circuit inside your purse, then use a battery pack with a special pocket for you phone — that way the phone is always charging while it’s safely put away!

Stick around after the break to see the complete how-to video.

Continue reading “Cellphone Charging Inductive Purse” →

Assassin’s Creed Hidden Blade

November 2, 2013 by Brian Benchoff 38 Comments

The youngins in the crowd may not remember Taxi Driver, but [Matt]’s fully functional hidden blade from Assassin’s Creed finally does justice to the hidden weapon on a drawer slide idea. It’s got everything you would want – immaculate craftsmanship and a video game reference for that every so necessary blog cred.

[Matt] started his hidden blade build with a drawer slide, mounting an old WWII replica blade to the slider. The blade retraction is spring-loaded, and with a small ring and a bit of wire, the blade gets its automatic draw and retraction.

The arm brace is where this project really shines. [Matt] crafted this out of two pieces of leather, tooled with the Assassin’s insignia and dyed to a deep, jet black

This isn’t the first time we’ve seen an automatic hidden blade from Assassin’s Creed, but [Matt]’s effort is really top-notch. He’s got beautiful leather crafting down pat, and we can only hope his Halloween was filled with parkour and stabbing.

Hackaday Interview With Amal Graafstra, Creator Of XNT Implant Chip

October 30, 2013 by Mathieu Stephan 111 Comments

Near Field Communication (NFC) enabled devices are starting to appear in our everyday lives. Shown in the picture above is the xNT (fundraiser warning), a 2mm x 12mm fully NFC Type 2 compliant 13.56MHz RFID tag encased in a cylindrical Schott 8625 bioglass ampule. It was created by [Amal Graafstra], who therefore aims to produce the world’s first NFC compliant RFID implant. The chip used is the NTAG203, which is (for the sake of simplicity) a 144bytes EEPROM with different protection features.

We can only start thinking of the different possibilities this chip will create in the near future, but also wonder which precedent this may set for future NFC enabled humans. Embedded after the break is the presentation video of xNT but also an interview I conducted with [Amal Graafstra], who has already been living for 8 years with RFID tags in each hand.

Continue reading “Hackaday Interview With Amal Graafstra, Creator Of XNT Implant Chip” →

LED Costumes And Clothing

October 6, 2013 by Marsh 22 Comments

3ledCostume

Our tips line recently received an influx of wearable LED projects, both for casual and professional wear. [Elizabeth] and [Luis] have created the Lüme wearable collection, aimed at accessorizing by adding adjustable accent colors to jackets, t-shirts and dresses. The electronics are custom-made, built around an ATMega32u4, and each is Bluetooth enabled to interact with a user’s cell phone. From the phone, you can change colors, sequences, set up events, and even take advantage of an “inkdropper-style” feature that matches the color of the LEDs to any object you point your camera at.

[Michal’s] project is an entire suit for a dance and laser show entitled “Tron Dance”, which uses several RGB LED strips placed on key points of the wearer’s costume. It looks like [Michal] has intentionally avoided the joint areas to prevent any problems with breaks or bends, but still manages to place enough to cover the entire body. We aren’t sure what controls everything, but you can watch it go through various sequences and survive an onstage performance after the break.

Finally, in yet another kind of performance, magician [Kiki Tay] has built a jacket that’s overflowing with RGB LEDs. [Kiki] wanted wearable LED control that could be used in various situations without having to re-invent the wheel each time, so he developed his own board — the LED Magician: an Arduino-compatible solution. The board has 12 outputs channels, drives 50+ LEDs per channel and features 12 on-board LEDs that display a preview of the output. To make interactions user-friendly, [Kiki] has provided 32 built-in sequences and adjustable speeds that the user can program via 4 buttons on the board. If that isn’t enough control, there are some options for external control as well. The jacket itself runs off a hobby LiPo battery and is blindingly bright: stick around after the break for a video.

Continue reading “LED Costumes And Clothing” →

VU Meter Prom Dress

October 3, 2013 by James Hobson 11 Comments

vu meter prom dress

[Kyle] has just put the finishing touches on this VU Meter Prom dress, and it looks great!

The dress makes use of 70 feet of aquamarine EL wire, a 2600mAh li-on battery, a repurposed DB9 cable, an Arduino knock off, an Adafruit microphone pre-amp, and features eight addressable triac channels through an EL Escudo Dos by Sparkfun. Each loop of EL wire was sewn into the dress using clear thread. The separate segments were then daisy chained together near the zipper in the back using ribbon cables. To top it all off, [Kyle] has a cheap thermoforming setup utilizing a toaster oven which he used to make an acrylic case for the electronics.

The dress is for his lucky friend [Diane] and we think it will make for quite a memorable prom! To see this awesome VU Meter in action, stick around after the break for the video.

Continue reading “VU Meter Prom Dress” →