Competitive Soldering Is Now A Thing

August 30, 2018 by Brian Benchoff 51 Comments

At Hackaday, we’re constantly impressed by the skill and technique that goes into soldering up some homebrew creations. We’re not just talking about hand-soldering 80-pin QFNs without a stencil, either: there are people building charlieplexed LED arrays out of bare copper wire, and using Kynar wire for mechanical stability. There are some very, very talented people out there, and they all work in the medium of wire, heat, and flux.

At this year’s DEF CON, we opened the floodgates to competitive soldering. Along with [Bunny] from Hardware Hacking Village and the many volunteers from the HHV and Soldering Skills Village, dozens competed to solder up a tiny kit full of LEDs and microscopic resistors.

The kit in question was an SMD Challenge Kit put together my MakersBox, and consisted of a small PCB, an SOIC-8 ATtiny, and a LED and resistor for 1206, 0805, 0603, 0402, and 0201 sizes. The contest is done in rounds. Six challengers compete at a time, and everyone is given 35 minutes to complete the kit.

We’ve seen — and participated in — soldering challenges before, and each one has a slightly unique twist to make it that much more interesting. For example, at this summer’s Toorcamp, the soldering challenge was to simply drink a beer before moving to the next size of parts. You would solder the 1206 LED and resistor sober, drink a beer, solder the 0805, drink a beer, and keep plugging away until you get to the 01005 parts. Yes, people were able to do it.

Of course, being DEF CON and all, we were trying to be a bit more formal, and drinking before noon is uncouth. The rules for this Soldering Challenge award points on five categories: the total time taken, if the components are actually soldered down, a ‘functionality’ test, the orientation of the parts, and the quality of the solder joints.

The winners of the soldering challenge, at the Hackaday Breakfast Meetup at DEF CON 26

So, with those rules in place, who won the Soldering Challenge at this year’s DEF CON? Out of a total 25 points, the top scorers are:

[True] – 23 pts
[Rushan] – 19 pts
[Ryan] – 18 pts
[Beardbyte] – 18 pts
[Casey] – 18 pts
[Bob] – 18 pts
[Nick] – 18 pts
[JEGEVA] – 18 pts

The Soldering Challenge had an incredible turnout, and the entire Soldering Skills Village was packed to the gills with folks eager to pick up an iron. The results were phenomenal!

We’d like to extend a note of thanks to [Bunny], the Hardware Hacking Village, the Soldering Skills Village, and MakersBox for making this happening. It was truly a magical experience, and now that competitive soldering is a thing, we’re going to be doing this a few more times. How do you think this could be improved? Leave a note in the comments.

VCF West: Adding A Front Panel To The 6502

August 5, 2018 by Brian Benchoff 19 Comments

When you think about vintage computers from the 1970s, the first thing that should spring to mind are front panels loaded up with switches, LEDs, and if you’re really lucky, a lock with a key. Across all families of CPUs from the ’70s, you’ll find front panel setups for Z80s and 8080s, but strangely not the 6502. That’s not to say blinkenlights and panel switches for 6502-based computers didn’t exist, but they were astonishingly rare.

If something hasn’t been done, that means someone has to do it. [Alexander Pierson] built The Cactus, a 6502-based computer that can be controlled entirely through toggle switches and LEDs.

If you’re wondering why something like this hasn’t been built before, you only have to look at the circuitry of the 6502 CPU. The first versions of this chip were built with an NMOS process, and these first chips included bugs, undefined behavior, and could not be run with a stopped clock signal. These problems were fixed with the next chip spin using a CMOS process (which introduced new bugs), but the CMOS version of the 6502 would retain the contents of its registers with a stopped clock signal.

The specs for the Cactus computer are what you would expect from a homebrew 6502 system. The chip is a WDC 65C02S running at 1MHz, there’s 32k of RAM and a 16k EPROM, dual 6551s give serial access at various baud rates, and there are 16 bits of parallel I/O from a 65C22 VIA. The ROM is loaded up with OSI Basic. The real trick here is the front panel, though. Sixteen toggle switches allow the front panel operator to toggle through the entire address space, and eight flip switches can set any bit in the computer. Other controls include Run, Halt, Step, Examine, and Deposit, as you would expect with any front panel computer.

It’s a fantastic piece of work which I missed seeing at VCF East so I’m really glad [Alexander] made the trip between coasts. Cactus is truly something that hasn’t been done before. Not because it’s impossible, but simply because the state of the art technology from when the 6502 was new didn’t allow it. Now we have the chips, and the only limitation is finding someone willing to put in the work.

This Weekend: The Vintage Computer Festival West

August 1, 2018 by Brian Benchoff 3 Comments

This weekend it’s all going down at the Vintage Computer Museum in Mountain View, California. The Vintage Computer Festival West is happening this weekend

What’s going on this year at VCF West? Far too much. The exhibits include everything from floptical disks, a fully restored and operation PDP-11/45, home computers from the UK and Japan, typewriters converted into teletypes, a disintegrated CPU, and LISP machines. The talks are equally spectacular, with a keynote from [Tim Paterson], the creator of 86-DOS, the basis of MS-DOS. You’ll also hear about PLATO, the Internet before the Internet, PDP-1 demonstrations, and if we’re lucky they’re going to fire up the ancient IBM 1401. There will also be a vintage computer consignment, which is at least as interesting as the exhibits. The consignment is basically a museum, but you can buy the exhibits.

VCF West is happening this weekend at the Computer History Museum in Mountain View, itself a worthy destination for a day trip. For one weekend a year, though, the Computer History Museum is taken over by VCF attendees and becomes the greatest place to learn about this history of computing. They even have one of those Waymo bug cars in their autonomous vehicle exhibit.

All of this is going down this Saturday and Sunday, starting at 9am. Tickets are $20 for one day, $30 for the entire weekend, and yes, that includes admission to the Computer History Museum. Don’t miss out!

After The Sun Set On San Mateo, LED Takes Over Hackaday’s BAMF Meetup

June 27, 2018 by Roger Cheng 5 Comments

After this Spring’s Bay Area Maker Faire closed down for Saturday night and kicked everybody out, the fun moved on to O’Neill’s Irish Pub where Hackaday and Tindie held our fifth annual meetup for fellow Maker Faire attendees. How do we find like-minded hackers in a crowded bar? It’s easy: look for tables lit by LEDs and say hello. It was impossible to see everything people had brought, but here are a few interesting samples.

Continue reading “After The Sun Set On San Mateo, LED Takes Over Hackaday’s BAMF Meetup” →

Hackaday Links: March 11, 2018

March 11, 2018 by Brian Benchoff 18 Comments

Guess what’ll be wrapping up in just two weeks? The Midwest RepRap Festival, the largest con for open source 3D printing in the world. MRRF is going down in Goshen, Indiana on March 23rd through March 25th. Tickets are free! If you’re looking for a hotel, I can speak from experience that the Best Western is good and close to the con, and I haven’t heard anything bad about the Holiday Inn Express.

Want to go to a convention with even weirder people? Somehow or another, a press release for Contact In The Desert, the largest UFO conference in the world, ended up in my inbox. It’s on the first weekend in June near Cochilla. Why is this significant? Because the greatest people-watching experience you’ll ever see, AlienCon 2018, is happening in Pasadena just two weeks later. The guy with the hair from Ancient Aliens will be at both events. Why are they having a UFO conference where military planes fly all the time? Wouldn’t it be better to rule out false positives?

The entirety of Silicon Valley tech culture is based upon the principle of flouting laws and regulations. We have reached a new high water mark. Swarm Technologies, a ‘stealth startup’ working on ‘Internet of Things’ satellites recently sent up four 0.25U cubesats on an ISRO flight. The satellites were deployed and are currently in orbit. This is somewhat remarkable, because the FCC, the government body responsible for regulating commercial satellites, dismissed Swarm’s application for launch on safety grounds. As reported by IEEE Spectrum, this is the first ever unauthorized launch of commercial satellites.

The TRS-80 Model 100 was one of the first, best examples of a ‘notebook’ computer. It had a QWERTY keyboard, an LCD, and ran off a few AA batteries for 20 hours. It’s the perfect platform for a Raspberry Pi casemod, and now someone has finally done it. [thecodeman] stuffed a Pi into a broken model M100 and replaced the old LCD with a 7.8″ 400×1280 pixel display. The display is the interesting part here, and it comes from EarthLCD, part number earthlcd-7-4001280.

The Flite Test crew is famous for their foam board RC airplanes, but they have historically had some significantly more interesting builds. Can you fly a cinder block? Yep. Can you fly a microwave and have it pop popcorn? Yep. Their latest crazy project is a flying Little Tikes Cozy Coupe, the ubiquitous red and yellow toy car meant to fit a toddler. The wings are made out of cardboard, the motors — both of them — generate thirty pounds of thrust each, and you can weld with the batteries. Does it fly? Yes, until the wings collapsed and the Cozy Coupe plummeted to the ground. Watch the video, it’s a great demonstration of designing a plane to rotate off the ground.

Hackaday At 34C3

December 24, 2017 by Elliot Williams 19 Comments

It’s that time of year. While the rest of the Christmas-celebrating world sits around and plays with the toys that they got out from under the tree, German nerds head off to the biggest European hacker con: the 34th annual Chaos Communications Congress, running Dec. 27th through 30th.

The CCC is both a grandparent among hacker cons, and the most focused on using technology to improve the world and bringing folks together. (The “communications” in the name is a dead giveaway.) This year’s motto, “tuwat!” is slangy-dialecty for “do something!” and is call to get up off the couch and use your super-powers for good.

If you can’t get over to Leipzig to join us, you’ll be able to read our extensive coverage starting up shortly after the opening ceremonies, and probably stretching well into 2018. And since the CCC media folks manage to stream every talk, hackers all over the world can follow along live. Most talks are in English, so get together with folks in your hackspace and have a video night!

And if you are in Leipzig, be on the lookout for [Elliot] who will be wandering around, attending workshops, and writing down as much as possible. Show me something cool, rave about a particularly good talk, or just say “hi”.

Fairy Dust clipart courtesy [sonoftroll].

Open Hardware Summit This Thursday

October 4, 2017 by Brian Benchoff 9 Comments

This Thursday, Hackaday and Tindie are going to be rolling into Denver to attend the 2017 Open Hardware Summit.

What’s the big draw for the Open Hardware Summit? The attendees, of course. These are the people who make all the cool bits and bobs in Open Hardware. [Prusa] will be there, Seeed will be there, OSH Park and OSH Stencils will be there (yeah, they’re different companies), BeagleBoard will be there, and Great Scott Gadgets will be there. This is the place you want to be if you want to meet the heroes of Open Hardware.

Of special interest at the Open Hardware Summit this year will be the state of certification talk. Last year, a certification process for Open Hardware was started. If you’re not aware, this is a nearly intractable problem. Copyright covers design files, not implementation, and design patents only cover ornamental fluff on the stuff that actually makes things go. Creating a certification for Open Hardware is exponentially harder than arguing over an Open Source license, and we’re excited to see how the first year of the Open Hardware Certification went.

If you’re going and hanging around in Denver until Friday, there’s a road trip being planned by Sparkfun to visit the awesome companies along the Front Range. The itinerary includes a trip to Sparkfun, lunch at a brewery, and a trip to Lulzbot. Basically, Sparkfun rented a bus. The deadline to RSVP passed long ago, but I’m renting a van for the Hackaday and Tindie crew, and I’m sure there’s going to be some overflow. After the event on Thursday, there will be a Women Who Hack Dinner and Drinks. Hackaday’s evil overlords are graciously providing the drinks and appetizer there.