EMF camp

21 Articles

Bone Conduction Skull Radio

August 17, 2016 by 20 Comments

There are many ways to take an electrical audio signal and turn it into something you can hear. Moving coil speakers, plasma domes, electrostatic speakers, piezo horns, the list goes on. Last week at the Electromagnetic Field festival in the UK, we encountered another we hadn’t experienced directly before. Bite on a brass rod (sheathed in a drinking straw for hygiene), hear music.

The TOG Skull Radio demo box
The TOG Skull Radio demo box

This was Skull Radio, a bone conduction speaker courtesy of [Tdr], one of our friends from TOG hackerspace in Dublin, and its simplicity hid a rather surprising performance. A small DC motor has its shaft connected to a piece of rod, and a small audio power amplifier drives the motor. Nothing is audible until you bite on the rod, and then you can hear the music. The bones of your skull are conducting it directly to your inner ear, without an airborne sound wave in sight.

The resulting experience is a sonic cathedral from lips of etherial sibilance, a wider soft palate soundstage broadened by a tongue of bass and masticated by a driving treble overlaid with a toothy resonance before spitting out a dynamic oral texture. You’ll go back to your hi-fi after listening to [Tdr]’s Skull Radio, but you’ll know you’ll never equal its unique sound.

(If you are not the kind of audiophile who spends $1000 on a USB cable, the last paragraph means you bite on it, you hear music, and it sounds not quite as bad as you might expect.)

This isn’t the first bone conduction project we’ve featured here, we’ve seen a Bluetooth speaker and at least one set of headphones, but our favorite is probably this covert radio.

EMF Camp 2016, A Personal Review

August 11, 2016 by 18 Comments

If I can offer one piece of advice to the Hackaday readership, it is this: Never, ever, be the sole member of your hackerspace’s board that owns a large station wagon, unless you relish the thought of packing an entire hacker camp village into your vehicle and transporting it halfway across the country in the blazing August heat.

I’ve done my laundry, aired my tent, and just sorted the contents of a brace of Tesco bags into several categories: rubbish, food, camping gear and interesting stuff. As I write this, yesterday was teardown day for Electromagnetic Field 2016, an event that bills itself as “a non-profit UK camping festival for those with an inquisitive mind or an interest in making things: hackers, artists, geeks, crafters, scientists, and engineers”, and this is a personal account of the event from the point of view of both being part of the Oxford Hackspace village and of waving the flag for Hackaday and Tindie.

Continue reading “EMF Camp 2016, A Personal Review” →

EMF Fire Pong

August 11, 2016 by 8 Comments

One of the installations that consistently drew a large crowd after dark at EMF Camp 2016 was a game. This wasn’t a conventional computer game though, instead it was a line of gas jets along which a pair of players had to bat a jet of flame between them at ever-increasing speed until one player missed the return. This was the Fire Pong game created by members of Nottingham Hackspace, and though there seems to have been no online write-up of it as yet they have posted enough pictures of its build for us to deduce something of its construction.

A network of gas pipes and jets with all valves brought out to a clearly labeled control panel appears to control the gas flow through solenoid valves connected to a relay board driven by what appears to be an Arduino Pro Mini. The bats are huge for theatrical effect, but contain accelerometers to sense player swipes and send the information back to the gas control circuits. A pair of much larger flame generators indicate the end of a rally, and the score is displayed on a large LED scoreboard. There is very likely to be more to the system than we can glean from these pictures and a shot of the various components, but as yet we are so-to-speak in the dark on their details.

If you will excuse the quality constraints of a mobile phone camera in a darkened field, a video of the game in action is below the break. There was a significant queue for a turn at the bat, this was one of the event’s more popular night-time attractions.

Continue reading “EMF Fire Pong” →

TiLDA MKπ, The EMF Camp 2016 Badge

August 9, 2016 by 15 Comments

The Scottish Consulate has stamped its last passport, the Dutch fire tower has belched its final flame, and the Gold Members Lounge has followed the Hacienda and the Marquee into clubland oblivion. EMF Camp 2016 is over, so all the 1500 or so attendees have left are the memories, photographs, and festival diarrhoea to remind them of their three days in the Surrey countryside.

Well, not quite all, there is the small matter of the badge.

In the case of EMF 2016 it was called TiLDA MKπ, and since there was a point earlier in the year when it seemed the badge might never see the light of day it represents a significant achievement from the EMF badge team.

The badge features an STM32L486VGT6 ARM Cortex M4 running at 80MHz, a 320×240 pixel colour LCD, magnetometer and accelerometer, and a CC3100 WiFi processor. The firmware provides a simple interface to an app store containing an expanding array of micropython apps from both the EMF Camp team and submitted by event attendees. As shipped the badge connects to one of the site networks, but this can be adjusted to your own network after the event. It’s been designed for ease of hacking, requiring only a USB connection and mounting as a disk drive without need for special software or IDE. A comprehensive array of I/O lines are brought out to both 0.1″ pitch pins and 4mm edge-mounted holes. At the EMF Camp closing speeches there was an announcement of a competition with a range of prizes for the best hardware and software uses for the badge.

shane-tweetThe TiLDA causes a sticky moment for our colleague, Tindie scribe Shane.
The TiLDA causes a sticky moment for our colleague, Tindie scribe Shane.

As is so often the case the badge was not without its teething troubles, as the network coped with so many devices connecting at once and the on-board Neopixel turned out to have been mounted upside down. Our badge seemed to have a bit of trouble maintaining a steady network connection and apps frequently crashed with miscellaneous Python errors, though a succession of firmware updates have resulted in a more stable experience. But these moments are part of the badge experience; this is after all an event whose attendees are likely to have the means to cope with such problems.

All the relevant files and software for the badge are fully open-source, and can be found in the EMF Camp GitHub repositories. We’ve put a set of images of the board in a gallery below if you are curious. The pinout images are courtesy of the EMF badge wiki.

We’ve featured EMF badges before, here’s our look at the EMF 2014 device.

EMF: You Shall Find Us At The Sign Of The Jolly Wrencher

August 4, 2016 by 2 Comments

It’s frustrating, the reluctance of some of my fellow hackspace members to put the cordless drill battery back in the charger after use.  As this is being written I’ve just coaxed enough energy from the drill to make a few holes in a piece of PVC pipe that will form part of an improvised flagpole, and upon that pole will hang Hackaday’s Jolly Wrencher flag at this weekend’s EMF Camp. We’re sharing a village with Oxford Hackspace, and as both your Hackaday scribe and an OxHack member the last week has been a little busy.

In theory it’s a simple enough process, getting a hackspace and all its assorted accoutrements down to Guildford. Three or four members’ cars will be loaded to the gunwales and will set off in good time to have everything under way without still desperately getting ready when the fun begins. In practice it’s been a procession of narrowly averted disasters, from the gazebo someone bought at auction turning out to have five walls and no roof, to the large ball that forms an essential part of one of the projects OxHack will be featuring being a buy-while-stocks-last remaindered product from last years Argos catalogue that only certain stores seem to still have.

We’ll be on the border between camping areas A and B, next to our friends from the Netherlands. I’m told that this location was requested due to likely proximity to a source of stroopwafels.  If you come along on Friday between 6 and 8 PM we’re holding the Tindie bring-a-hack event, at which we’ll be inviting attendees to bring along their hacks to share with the masses. All projects are welcome, but if you have a Hackaday Prize entry, a Hackaday.io project or a Tindie item we’d especially love to see you. My colleague Jasmine assures me that there will be a limited amount of Hackaday and Tindie swag on offer.

If you’re going down to EMF Camp this weekend then please drop by and have a chat if you’re passing our village. Otherwise you’ll probably encounter us on our travels as we try to seek out the interesting projects and hacks to feature on these pages. We hope the British weather doesn’t deliver any unpleasant surprises, and may all your projects work when you demonstrate them in front of the masses!

Jenny List is a director of Oxford Hackspace when she is not writing for Hackaday.

Hackaday Links: July 24, 2016

July 24, 2016 by 9 Comments

Right now HOPE is dying down, and most of the Hackaday crew will be filtering out of NYC. It was a great weekend. The first weekend in August will be even better. We’re going to DEF CON, we’ll have people at VCF West, and a contingent at EMF Camp. If you’re going to EMF Camp, drop a line here. There will be Hackaday peeps wandering around a field in England, so if you see someone flying the Hackaday or Tindie flag, stop and say hi.

Raspberry Pi’s stuffed into things? Not all of them are terrible. The Apple Extended keyboard is possibly the best keyboard Apple ever produced. It’s mechanical (Alps), the layout is almost completely modern, and they’re actually cheap for something that compares well to a Model M. There’s also enough space inside the plastic to fit a Pi and still have enough room left over for holes for the Ethernet and USB ports. [ezrahilyer] plopped a Pi in this old keyboard, and the results look great. Thanks [Burkistana] for sending this one in.

We’ve been chronicling [Arsenijs] Raspberry Pi project for months now, but this is big news. The Raspberry Pi project has cracked 10k views on Hackaday.io, and is well on track to be the most popular project of all time, on any platform. Congrats, [Arsenijs]; it couldn’t happen to a better project.

A few months ago, [Sébastien] released SLAcer.js, a slicer for resin printers that works in the browser. You can’t test a slicer without a printer, so for the last few months, [Sébastien] has been building his own resin printer. He’s looking for beta testers. If you have experience with resin printers, this could be a very cool (and very cheap) build.

Anyone going to DEF CON? For reasons unknown to me, I’m arriving in Vegas at nine in the morning on Wednesday. This means I have a day to kill in Vegas. I was thinking about a Hackaday meetup at the grave of James T. Kirk on Veridian III. It’s about an hour north of Vegas in the Valley of Fire State Park. Yes, driving out to the middle of the desert in August is a great idea. If anyone likes this idea, leave a note in the comments and I’ll organize something.