Hacked CCFL Inverter Becomes An Arc Lighter

December 31, 2016 by Dan Maloney 14 Comments

[GreatScott!] needs to light off fireworks with an arc rather than a flame, because “fireworks and plasma” is cooler than fireworks and no plasma. To that end, he attempted to reverse engineer an arc lighter, but an epoxy potted high-voltage assembly thwarted him. Refusing to accept defeat, he modified a CCFL inverter into an arc lighter, and the process is pretty educational.

With his usual impeccable handwriting and schematic drawing skills, [GreatScott!] documents that his CCFL inverter is a resonant Royer oscillator producing a sine wave of about 37 kHz, which is then boosted to about 2400 volts. That’s pretty good, but nowhere near the 15 kilovolts needed for a self-sustaining arc across electrodes placed 5 mm apart. A little math told him that he could achieve this by rewinding the transformer’s primary with only 4 turns. After some testing, the rewound transformer was fitted back into the Royer circuit and with a few modifications the arc was struck.

It’s not a finished project yet, and we’re looking forward to seeing how [GreatScott!] puts this to use. For now, we’re grateful for the lesson is Royer oscillators and rewinding transformers. But if you’d rather hack an off-the-shelf arc lighter, there’s always this arc lighter pyrography pen, or this mini plasma cutter.

Continue reading “Hacked CCFL Inverter Becomes An Arc Lighter” →

Tiny Game Of Simon On An ATtiny13

December 31, 2016 by Elliot Williams 13 Comments

How much game can you get out of a chip with only 1 kB of flash memory and (five or) six free GPIOs? Well, you can get it to play the classic memory game, Simon. [Vojtak] is submitting this project for the 1 kB Challenge, but it looks like it’s already been used to teach simple microcontrollering to teenagers as well, so the code is actually straightforward to read, but full of nice features.

Neat tricks include sharing button-press sensing and LED driving on the same pin, which was necessary to make everything work on such a small chip. A simple linear-congruential pseudorandom sequence provides the variation, and it’s seeded by slow-clock/fast-clock timing jitter, so you’re probably not going to see the same sequence twice. (It’s not the best random number generator ever, but it’ll do.) If that weren’t enough, high scores (and the random seed for the game) are saved to EEPROM so that you can brag to your friends or re-live your previous moments of glory.

The board is easily solderable together as well. This is a fantastic beginner project, with details in the code that everyone can learn from. It’s a great game, and a great demonstration of what you can do with a dollar’s worth of parts and 1 kB of code.

Continue reading “Tiny Game Of Simon On An ATtiny13” →

Cheap Cat Feeder Enhances Sleep

December 30, 2016 by Al Williams 21 Comments

We’ll admit it: we sometimes overcomplicate things. Look at [Peter Weissbrod’s] automated cat feeder, for example. It isn’t anything more than a bottle, a servo, some odds and ends, and an Arduino. However, it lets him sleep in without his cat waking him for service.

We looked at the code and thought, “This thing will just dispense food all the time! That’s not what you want!” Then we looked closer. [Peter] uses a common household timer to just turn the device on in the morning, let it run for a bit, and then turns it off. You can see a video of the mechanism, below.

Continue reading “Cheap Cat Feeder Enhances Sleep” →

Smartphone Case For The Retro Gamer

December 30, 2016 by James Hobson 8 Comments

A well-designed phone case will protect your phone from everyday bumps with only as much style flair as you’d like. While protection is usually the only real function of a case, some designs — like [Gabbelago]’s Emucase — add specific utility that you might not have known you needed.

Contrary to most cases, the Emucase fits over your phone’s screen, and the resulting facelift emulates the appearance of a Game Boy for easier — you guessed it — Game Boy emulation play on your smartphone.

Cannibalizing a USB SNES gamepad for its buttons and rubber contact pads, Gabbelago then threaded some wire through the contacts, securing it with copper tape and glue; this provides a measurable level of capacitance to register on the touchscreen. Using heat to bend the sides of the 3D printed case so it can attach to the phone is probably the trickiest part of this cool project. Check out his build instructions for any pointers you need.

Continue reading “Smartphone Case For The Retro Gamer” →

33C3: Works For Me

December 30, 2016 by Elliot Williams 20 Comments

The Chaos Communication Congress (CCC) is the largest German hacker convention by a wide margin, and it’s now in its thirty-third year, hence 33C3. The Congress is a techno-utopian-anarchist-rave with a social conscience and a strong underpinning of straight-up hacking. In short, there’s something for everyone, and that’s partly because a CCC is like a hacker Rorschach test: everyone brings what they want to the CCC, figuratively and literally. Somehow the contributions of 12,000 people all hang together, more or less. The first “C” does stand for chaos, after all.

What brings these disparate types to Hamburg are the intersections in the Venn diagrams. Social activists who may actually be subject to state surveillance are just as interested in secure messaging as the paranoid security geek or the hardcore crypto nerd who’s just in it for the algorithms. Technology, and how we use it to communicate and organize society, is a pretty broad topic. Blinking lights also seem to be in the intersection. But on top of that, we are all geeks. There’s a lot of skill, smarts, and know-how here, and geeks like sharing, teaching, and showing off their crazy creations.

Continue reading “33C3: Works For Me” →

Sorting Resistors With 3D Printing And A PIC

December 30, 2016 by Al Williams 20 Comments

If you aren’t old enough to remember programming FORTRAN on punched cards, you might be surprised that while a standard card had 80 characters, FORTRAN programs only used 72 characters per card. The reason for this was simple: keypunches could automatically put a sequence number in the last 8 characters. Why do you care? If you drop your box of cards walking across the quad, you can use a machine to sort on those last 8 characters and put the deck back in the right order.

These days, that’s not a real problem. However, we have spilled one of those little parts boxes — you know the ones with the little trays. We aren’t likely to separate out the resistors again. Instead, we’ll just treasure hunt for the value we want when we need one.

[Brian Gross], [Nathan Lambert], and [Alex Parkhurst] are a bit more industrious. For their final project in [Bruce Land’s] class at Cornell, they built a 3D-printed resistor sorting machine. A PIC processor feeds a resistor from a hopper, measures it, and places it in the correct bin, based on its value. Who doesn’t want that? You can see a video demonstration, below.

Continue reading “Sorting Resistors With 3D Printing And A PIC” →

Mike Szczys On The State Of The Hackaday

December 30, 2016 by Mike Szczys 70 Comments

Hey, that’s me! I had the honor of giving a talk at the Hackaday SuperConference in November about our editorial direction over the past year and looking towards the next. At any given time we have about 20-25 people writing articles for Hackaday. We depend on their judgment, experience, and skill to keep Hackaday fresh. It would be wonderful if you would join me in thanking all of the writers and editors for a great year by leaving your well-wishes in the comments.

Take a look at the video of the talk, then join me below for a few more thoughts.