Re-Engineering The Ford Model A Engine

September 5, 2017 by Jenny List 45 Comments

Over the nearly a quarter century since the Web has been in existence, there have been various websites and projects in the field covered by Hackaday that have done the rounds and captured our attention for a while. Some have turned into major projects and products, others have collapsed spectacularly, while many have faded away and been forgotten.

It was one of those “I wonder what happened to… ” moments that prompted a search for just such a project that did the rounds a little at the start of this decade. Re-Engineering the Model A Engine is [Terry Burtz]’s project to take the Ford Model A engine from the 1920s and re-engineer it with the benefit of some upgrades to increase its longevity and reliability. The new engine would look identical to the original unit, but would feature modern metallurgy, a re-engineered crankshaft with up-to-date bearings, a pressurised lubrication system, and some cooling system modifications.

The web site has a fascinating technical description and history of the Model A engine, along with a detailed examination of the proposed upgrades. There is a long list of project updates, but sadly work stalled in 2015 due to difficulties finding an iron foundry that could cast the blocks at an affordable price. It’s a shame to see a promising project get so far and fall at this late hurdle, is it too much to hope that among the Hackaday readership there might be people in the foundry business who could advise? It’s quite likely that there would be a queue of Model A owners who would be extremely grateful.

If you think you’ve seen some veteran Ford action here before, you’d be right, but only to a point. Meanwhile where this is being written a similar project for a 1950s Standard Triumph engine would be most welcome.

Bye Bye Solaris, It Seems.

September 5, 2017 by Jenny List 97 Comments

For readers of A Certain Age, this may bring a tear to the eye. Reports have been circulating of the decision by Oracle to lay off a significant portion of the staff behind its Solaris operating system and SPARC processors, and that move spells the inevitable impending demise of those products. They bore the signature of Sun Microsystems, the late lamented workstation and software company swallowed up by the database giant in 2009.

So why might we here at Hackaday be reaching for our hankies over a proprietary UNIX flavour and a high-end microprocessor, neither of which are likely to be found on many of the benches of our readers in 2017? To answer that it’s more appropriate to journey back to the late 1980s or early 1990s, when the most powerful and expensive home computers money could buy were still connected to a domestic TV set as a monitor.

If you received a technical education at a university level during that period the chances are that you would have fairly soon found yourself sitting in a lab full of workstations, desktop computers unbelievably powerful by the standards of the day. With very high resolution graphics, X-windows GUIs over UNIX, and mice that weren’t just used for a novelty paint package, these machines bore some resemblance to what we take for granted today, but at a time when an expensive PC still came with DOS. There were several major players in the workstation market, but Sun were the ones that seemed to have the university market cracked.

You never forget your first love, and therefore there will be a lot of people who will never quite shake that association with a Sun workstation being a very fast desktop computer indeed. Their mantra at the time was “The network is the computer”, and it is the memory of a significant part of a year’s EE students trolling each other by playing sound samples remotely on each other’s SPARCStations on that network that is replaying in the mind of your scribe as this is being written.

A Raspberry Pi with a Raspbian desktop probably outperforms one of those 1980s SPARCStations in every possible way, but that is hardly the point and serves only to demonstrate technological progress. It feels as though something important died today, even if it may be a little difficult to remember what it was when sat in front of a multi-core x86 powerhouse with a fully open-source 64-bit POSIX-compliant operating system running upon it.

Unsurprisingly we’ve featured no hardware hacks with such high-end computing. If you’d like to investigate some Sun Microsystems hardware though, take a look at the Centre for Computing History’s collection.

RaspiReader, An Open Source Fingerprint Reader

September 4, 2017 by Jenny List 14 Comments

In 2008, the then German interior minister, [Wolfgang Schäuble] had his fingerprint reproduced by members of the German Chaos Computer Club, or CCC, and published on a piece of plastic film distributed with their magazine. [Schäuble] was a keen proponent of mass gathering of biometric information by the state, and his widely circulated fingerprint lifted from a water glass served as an effective demonstration against the supposed infallibility of biometric information.

Diagram showing the fingerprint reader's operation. — Diagram showing the fingerprint reader’s operation.

It was reported at the time that the plastic [Schäuble] fingerprint could fool the commercial scanners of the day, including those used by the German passport agency, and the episode caused significant embarrassment to the politician. The idea of “spoofing” a fingerprint would completely undermine the plans for biometric data collection that were a significant policy feature for several European governments of the day.

It is interesting then to read a paper from Michigan State University, “RaspiReader: An Open Source Fingerprint Reader Facilitating Spoof Detection” (PDF downloadable from the linked page) by [Joshua J. Engelsma], [Kai Cao], and [Anil K. Jain] investigates the mechanism of an optical fingerprint reader and presents a design using the ever-popular Raspberry Pi that attempts to detect and defeat attempts at spoofing. For the uninitiated is serves as a fascinating primer on FTIR (Frustrated Total Internal Reflection) photography of fingerprints, and describes their technique combining it with a conventional image to detect spoofing. Best of all, the whole thing is open-source, meaning that you too can try building one yourself.

If [Cao] and [Jain] sound familiar, maybe it’s from their Samsung Galaxy fingerprint hack last year, so it’s neat to see them at work on the defense side. If you think that fingerprints make good passwords, you’ve got some background reading to do. If you just can’t get enough fingerprints, read [Al Williams]’ fundamentals of fingerprint scanning piece from earlier this year.

Via Hacker News.

The Day Six Spaceships Landed In England

September 4, 2017 by Jenny List 36 Comments

The BBC, as the British national broadcaster for so many decades, now finds itself also performing the function of keeper of a significant part of the collective national memory. Thus they have an unrivaled resource of quality film and audio recordings on hand for when they look back on the anniversary of a particular story, and the retrospectives they create from them can make for a particularly fascinating read.

This week has seen the fiftieth anniversary of a very unusual event, the day six flying saucers were found to have crash-landed in a straight line across the width of Southern England. It was as though a formation of invaders had entered the atmosphere in a manoeuvre gone wrong, and maintained their relative positions as they hurtled towards the unsuspecting countryside.

Except of course, there were no aliens, and there were no flying saucers. Instead there was a particularly resourceful group of apprentices from the Royal Aircraft Establishment at Farnborough, and the saucers were beautifully made fibreglass and metal creations. They contained electronic sound generators to give an alien-sounding beeping noise, and a fermenting mixture of flour and water for an alien-looking ectoplasmic goo should anybody decide to drill into them. The police were called and the RAF were scrambled, and a media frenzy occurred before finally the jolly hoaxters were unmasked. In those simpler times everyone had a good laugh and got on with their lives, while without a doubt now there would have been a full-blown terrorism scare and a biohazard alert over all that flour paste.

A Hackaday writer never admits her age, but this is a story that happened well before the arrival of this particular scribe. We salute and envy these 1960s pranksters, and hope that they went on to do great things. If you are a British resident you can see an accompanying TV report on their southern regional news programme, Inside Out, on BBC One South East and South today at 19:30 BST, or via BBC iPlayer should you miss it.

Flying saucer confectionery image: jo-h [CC BY 2.0].

How To Select Just About Any Electronic Part

September 3, 2017 by Jenny List 14 Comments

Sometimes you see an excellent post somewhere else on the web, and then discover that it is one of a series of similarly good posts that you completely missed when they were published. If you are a Hackaday scribe you are left wondering how you managed to pass them by, and then why on earth you didn’t think of writing them yourself.

Such is the case with [Sanket Gupta]’s excellent series for Octopart, of posts titled “How to select a…” and then a class of component. It was the latest, “How to select a voltage regulator” that caught our eye first, but then we found the previous installments dealing with capacitors, resistors, inductors, connectors, IC packages and MCUs. Each one provides a basic primer for the engineer, in terms of both parts selection based on capability and on suitability for manufacturing, and while you may think that only an inexperienced reader might find benefit in such pieces the reality is that everybody can learn something.

So if you are involved in choosing electronic parts, no matter at what level, take a look at this series. If you know everything [Sanket] has to say then we congratulate you on your mastery of the field, however we think most readers will find them to be an interesting and useful resource.

Header image: Kae [Public domain].

The Wrencher On The Road In The UK

September 1, 2017 by Jenny List 4 Comments

Here at Hackaday, we are a team of technical writers who spend our days keeping abreast of the wonderful world of hardware as we write up the interesting things that cross our timelines and serve them up everyone to enjoy. That is however only part of the picture, the other half of the Hackaday family is you, our readers and our community. You are a wonderfully diverse group of people who do some fascinating things, and you are what gives us life.

From time to time, Hackaday makes it out on the road, we have events, we host meetups, and we spend time with you, the community of which we are a part. Of course, our world can be an annoyingly big place at times, so for a lot of us these meetups are too far away. As a Brit, for example, the upcoming Hackaday Superconference in Pasadena, California, is a somewhat unattainable dream without shelling out a significant chunk of the old hard-earned on travel.

In the very short term we must continue to disappoint many of our worldwide readers because we can’t have meetups all over the world and all at once. But we can at least provide succour to our British readers this month, with more than one opportunity to get to know Hackaday writers as we go out on the road.

In the first instance, I’m going to be in Hebden Bridge, Yorkshire this weekend. I’ll be giving a couple of talks, one on Friday at the Wuthering Bytes festival, and the other on Saturday at the Open Source Hardware Camp. I’ll be bringing along the remainder of my stock of Hackaday stickers left over from SHA Camp, and I’d love to see what you’ve been getting up to.

But worry not if you can’t make it to Yorkshire, for there is another chance for Brits to meet us this month. Our London Unconference on the 16th of September may have been a speedy sell-out, but because we have no wish to disappoint those of you who missed out on a ticket we’re also running a bring-a-hack meetup the night before. We’ve hired the Drawing Room at the Marquis Cornwallis, a pub not too far from Russell Square Tube station in London, so come and have a pint with us and show us what you’ve made. Get your skates on, it’s not much more than a couple of weeks away!

Fail Of The Week: Arduino Sand Matrix Printer

August 31, 2017 by Jenny List 29 Comments

NYC beaches are where tropical beaches addicted to meth go to die. So says [Vije Miller] in his write-up for his Arduino sand matrix printer. It’s a clever idea, five servo-operated cardboard plungers that indent a pattern of dots in the sand as the device is pulled forward, resulting in something not unlike a dot matrix printer that can write messages in the sand.

He’s submitted it to us as a Fail Of The Week, because it doesn’t do a very good job of writing in the sand, and it’s burned out a servo. But we feel this isn’t entirely fair, because whether or not it has delivered the goods it’s still an excellent build. Cardboard isn’t a material we see much of here at Hackaday, but in this case he’s mastered it in a complex mechanism that while it may have proved a little too flexible for the job in hand is nevertheless a rather impressive piece of work.

You can see a brief video below the break showing it in action. He tells us his motivation has waned on this project, and expresses the hope that others will take up the baton and produce a more viable machine.

Continue reading “Fail Of The Week: Arduino Sand Matrix Printer” →