Author: Jenny List

3247 Articles

How To Turn Cheap Speakers Into Something A Little Better

July 5, 2024 by 25 Comments

[Adam Francis] bought some cheap speaker drivers from AliExpress. Are they any good? Difficult to tell without a set of enclosures for them, so he made a set of transmission line cabinets. The resulting video proves that a decent sounding set of speakers shouldn’t have to cost the earth, and is quite entertaining to watch.

The design he’s going for is a transmission line, in effect a folded half-wave resonant tube terminated at one end and open at the other, with the speaker close to half way along. There is a lot of nuance to perfecting a speaker cabinet, but this basic recipe doesn’t have to be optimum to give a good result.

So after having some MDF cut to shape and glueing it all together, he ends up with some semi decent speakers for not a lot of money. The video is entertaining, with plenty of Britishisms, but the underlying project is sound. We’d have a pair on our bench.

Continue reading “How To Turn Cheap Speakers Into Something A Little Better” →

Cavity Filters, The Black Art You Have A Chance Of Pursuing

July 4, 2024 by 12 Comments

A tuned circuit formed by a capacitor and an inductor is a familiar enough circuit, and it’s understood that it will resonate at a particular frequency. As that frequency increases, so the size of the capacitor and inductor decrease, and there comes a point at which they can become the characteristic capacitance and inductance of a transmission line. These tuned circuits can be placed in an enclosure, at which they can be designed for an extremely high Q factor, a measure of quality, and thus a very narrow resonant point. They are frequently used as filters for that reason, and [Fesz] is here with a video explaining some of their operation and configurations.

Some of the mathematics behind RF design can be enough to faze any engineer, but he manages to steer a path away from that rabbit hole and explain cavity filters in a way that’s very accessible. We learn how to look at tuned circuits as transmission lines, and the properties of the various different coupling methods. Above all it reveals that making tuned cavities is within reach.

They’re a little rare these days, but there was a time when almost every TV set contained a set of these cavities which were ready-made for experimentation.

Continue reading “Cavity Filters, The Black Art You Have A Chance Of Pursuing” →

The Workstation You Wanted In 1990, In Your Pocket

July 3, 2024 by 59 Comments

Years ago there was a sharp divide in desktop computing between the mundane PC-type machines, and the so-called workstations which were the UNIX powerhouses of the day. A lot of familiar names produced these high-end systems, including the king of the minicomputer world, DEC. The late-80s version of their DECstation line had a MIPS processor, and ran ULTRIX and DECWindows, their versions of UNIX and X respectively. When we used one back in the day it was a very high-end machine, but now as [rscott2049] shows us, it can be emulated on an RP2040 microcontroller.

On the business card sized board is an RP2040, 32 MB of PSRAM, an Ethernet interface, and a VGA socket. The keyboard and mouse are USB. It drives a monochrome screen at 1024 x 864 pixels, which would have been quite something over three decades ago.

It’s difficult to communicate how powerful a machine like this felt back in the very early 1990s, when by today’s standards it seems laughably low-spec. It’s worth remembering though that the software of the day was much less demanding and lacking in bloat. We’d be interested to see whether this could be used as an X server to display a more up-to-date application on another machine, for at least an illusion of a modern web browser loading Hackaday on DECWindows.

Full details of the project can be found in its GitHub repository.

Responsive LCD Backlights With A Little Lateral Thinking

July 3, 2024 by 23 Comments

LCD televisions are a technological miracle, but if they have an annoying side it’s that some of them are a bit lacklustre when it comes to displaying black. [Mousa] has a solution, involving a small LCD and a bit of lateral thinking.

These screens work by the LCD panel being placed in front of a bright backlight, and only letting light through at bright parts of the picture. Since LCD isn’t a perfect attenuator, some of the light can make its way through, resulting in those less than perfect blacks. More recent screens replace the bright white backlight with an array of LEDs that light up with the image, but the electronics to make that happen are not exactly trivial.

The solution? Find a small LCD panel and feed it from the same HDMI source as a big panel. Then place an array of LDRs on the front of the small LCD, driving an array of white LEDs through transistor drivers to make a new responsive backlight. We’re not sure we’d go to all this trouble, but it certainly looks quite cool as you can see below the break.

This may be the first responsive backlight we’ve brought you, but more than one Ambilight clone has graced these pages.

Continue reading “Responsive LCD Backlights With A Little Lateral Thinking” →

Retrotechtacular: The Tools And Dies That Made Mass Production Possible

July 3, 2024 by 15 Comments

Here at Hackaday we’re suckers for vintage promotional movies, and we’ve brought you quite a few over the years. Their boundless optimism and confidence in whatever product they are advancing is infectious, even though from time to time with hindsight we know that to have been misplaced.

For once though the subject of today’s film isn’t something problematic, instead it’s a thing we still rely on today. Precision manufacturing of almost anything still relies on precision tooling, and the National Tool and Die Manufacturers Association is on hand in the video from 1953 below the break to remind us of the importance of their work.

The products on show all belie the era in which the film was made: a metal desk fan, CRT parts for TVs, car body parts, a flight of what we tentatively identify as Lockheed P-80 Shooting Stars, and a Patton tank. Perhaps for the Hackaday reader the interest increases though when we see the training of an apprentice toolmaker, a young man who is being trained to the highest standards in the use of machine tools. It’s a complaint we’ve heard from some of our industry contacts that it’s rare now to find skills at this level, but we’d be interested to hear views in the comments on the veracity of that claim, or whether in a world of CAD and CNC such a level of skill is still necessary. Either way we’re sure that the insistence on metrology would be just as familiar in a modern machine shop.

A quick web search finds that the National Tool and Die Manufacturers Association no longer exists, instead the search engine recommends the National Tooling And Machining Association. We’re not sure whether this is a successor organisation or a different one, but it definitely represents the same constituency. When the film was made, America was at the peak of its post-war boom, and the apprentice would no doubt have gone on to a successful and pretty lucrative career. We hope his present-day equivalent is as valued.

If you’re of a mind for more industrial process, can we direct you at die casting?

Continue reading “Retrotechtacular: The Tools And Dies That Made Mass Production Possible” →

Everyone Needs A 1950s Signal Generator In Their Life

July 2, 2024 by 8 Comments

At Hackaday, we comb the world of tech in search of good things to bring you. Today’s search brought up something very familiar, [Jazzy Jane] has an Advance E1 tube signal generator, the same model as the unit on the shelf above where this is being written. It’s new to her, so she’s giving it a teardown and fixing any safety issues before powering it on.

For a 70+ year old unit, the quality of these instruments was such that they remain useful and reliable to this day. Unsurprisingly a few things need looking at, such as an aged mains lead and a pair of filter caps in the power supply which haven’t aged well. These parts failed on the E1 here too, and while she’s taking the time to order appropriate replacements we have to admit to being cheapskates and robbing parts with an appropriate working voltage for ours from a nearby PC power supply.

Where this one becomes rather interesting is in an extra switch and socket. It’s a wafer switch with a load of capacitors, and the best guess is it provides some adjustability for the inbuilt audio oscillator which had a fixed frequency on stock models. This is part one of a series though, so we’re looking forward to finding out its purpose in the next installment. Take a look at the video below the break, and if that’s not enough, we seem to have had more than one piece of vintage British test equipment here of late.

Continue reading “Everyone Needs A 1950s Signal Generator In Their Life” →

Make A Cheap Robot Mower Much Smarter

July 2, 2024 by 15 Comments

The Parkside range of tools as sold in European Lidl stores may be reasonably priced, but it contains some products of far better quality than their modest cost would suggest. This means that Parkside hacking has become as much of a cottage industry as IKEA hacking, and they’re a firm favorite for modifications. [Lambertus] has taken a Parkside robot mower, and converted it from a relatively mundane device to a fully-connected smart robot, with the aid of an ESP8266.

The hardware is surprisingly simple, as all that’s really needed is a stop/go command. This can be readily found by hooking up to the input from the mower’s rain sensor, allowing the ESP to control its operation. Then there’s an accelerometer to allow it to count motion, and a hookup tot he battery to measure voltage. The firmware uses ESPHome, resulting in a mower now connected to home automation.

This isn’t the first time we’ve shown you someone upgrading the smarts on  robot mover, and of course we’ve also taken a tour through the history of lawn mowers in general.