Head Mounted Camera Tracks With Your Eyes

May 25, 2010 by Mike Szczys 44 Comments

The EyeSeeCam is a rig that attaches to your noggin and points a camera wherever your gaze falls. There’s actually four cameras involved here, one to track each eye via a reflecting piece of acrylic, one as your third eye, and finally the tracking camera above that. There are some legitimate medical uses for this type of technology, but we enjoyed seeing some of the videos that [Johannes Vockeroth] put together showing everyday activities. We’ve embedded several clips after the break including an example of reading a book while wearing the apparatus. The third eye camera provides the wide shot with close-ups of the wearer’s visual focus.

Continue reading “Head Mounted Camera Tracks With Your Eyes” →

Cool Yourself With A CPU Cooler And Beer Fridge

May 25, 2010 by Mike Szczys 38 Comments

We have arrived once more at the time of year when penniless (or bored) hackers try to figure out how to keep the place cool without buying an air conditioner. [Paul Stacey] sent us his solution of pairing up a CPU cooler kit with a beer fridge. The CPU heat sink is cut out of a liquid cooling kit and discarded. In its place a loop of plastic tubing enters the freezer of the beer fridge where it exchanges salt water from a reservoir. The cold liquid circulates through the radiator of the fan kit and gives up it’s cool goodness through the fan unit seen above. This method puts a cold-air fan right in front of you with a digital temp and fan speed readout on the LCD.

Our biggest concern here is that this might heat up the beer in the fridge. Still, it’s more automatic than using a homebrew swamp cooler. Then again, we’ve always had a soft spot in our hearts for our favorite gravity fed cooling method. Anyway, check out [Paul’s] build methods after the break where he makes it look quick and easy.

Continue reading “Cool Yourself With A CPU Cooler And Beer Fridge” →

Mass Storage Business Card

May 25, 2010 by Mike Szczys 28 Comments

Just snap off the corners and this business card can be used as a mass storage device. Well sort of. The tab left over has four traces on the back to make it USB compatible. The PIC 24FJ64GB002 microcontroller on the card registers as a storage device and launches [Ramiro’s] resume and a cover letter loaded as an HTML file. He’s made it as useful as possible by including access to the SPI and I2C bus connections but he’s also included some firmware to act as a data logger or an oscilloscope. At about 5 euros a piece you won’t be distributing these willy-nilly but it’s not too much more than handing out breakout boards with your name all over them.

Aircraft Carrier Is Moving Target For Autonomous Quadcopter

May 25, 2010 by Mike Szczys 26 Comments

[Karl-Engelbert Wenzel] developed a UAV capable of taking off and landing on a moving platform autonomously. The platform operates aircraft-carrier-style by driving around the room in circles. The quadcopter tracks a grid of IR LEDs at the front of the landing deck by using the IR camera from a Wii remote. The best part is that the flight controls and processing are all done by the copter’s onboard ATmega644 processor, not requiring a connection to a PC. The landings are quite accurate, achieving a maximum error of less than 40 centimeters. In the video after the break you can see the first landing is slightly off the mark but the next two are dead on target.

So build yourself a mobile platform and pair it up with your newly finished quadcopter to replicate this delightful hack.

Continue reading “Aircraft Carrier Is Moving Target For Autonomous Quadcopter” →

Maple R3 Now Shipping

May 24, 2010 by Mike Szczys 15 Comments

Leaf Labs is now shipping the Maple R3 boards. [Phil Burgess] gave the platform a look just before launch last fall and the high-powered prototyping board is now even better. New features come in both hardware and software varieties. The bootloader can now be upgraded without additional programming hardware, there’s hardware SPI and I2C interfaces, and a newly-polished IDE for Linux and Windows. At $50 it’s a good way to get access to the power of the ARM Cortex M3 processor at the center of the board. We’ve seen several projects that use the mbed, which is in the same class as the Maple, but we’re waiting to see what you’ve accomplished with this little devil.

DB9 Form Factor USB-RS232 Replacement

May 24, 2010 by Mike Szczys 31 Comments

If you’re attached to that favorite DB-9 interfaced device you should look into this part. FTDI is selling a USB-RS232 adapter as a replacement for DB-9 connectors. They come with USB male or female connections depending on the application and have the same serial footprint and pinout to which you’re accustomed. Using converter cables is just fine but this simplicity requires a few minutes of desoldering, rather than redesigning, etching, and populating a board in order to give that older design built-in USB connectivity.

[Thanks Juan]

Build HAL Into Your Kitchen

May 24, 2010 by Mike Szczys 31 Comments

Instead of building a $500 iPad into a cabinet [Gojimi] used the old hardware he had lying around to building this kitchen computer. He did buy a few items such as a used touchscreen and a bar code scanner but the 2 GHz computer was just collecting dust. It’s running Windows XP, talks to you like HAL or KITT, and scans the bar codes on food as you add it to the pantry or using it for meals. The lengthy video after the break covers all of the features, such as Weight Watcher’s calculations, food information, recipe book, unit converter, weather forecast, browser, and digital picture frame. It seems to have more features than the iPhone kitchen lookalike but it also looks dauntingly complicated. But we still want one.

Continue reading “Build HAL Into Your Kitchen” →