Author: Al Williams

4505 Articles

Decoding The 8088

October 9, 2023 by 2 Comments

There is a lot to like about open software, and in some areas, a well-thought-out piece of software can really make a huge impact. A great example of this is the Sigrok project. Creating simple devices that act like a logic analyzer is relatively easy. What’s hard is writing nice software for such a setup including protocol decoders. Sigrok has done it and since it is open, you can add your device and decode your protocol. [GloriousCow] had done the hardware part of interfacing to the 8088 in an IBM PC using an off-the-shelf logic analyzer that uses a customized version of Sigrok. But the output was a CSV file you had to process in a spreadsheet program. The next step: write a decoder for Sigrok to understand 8088 bus cycles.

The post covers the details of writing such a plug-in for Pulseview, the Sigrok GUI. It will also work for the command line interface if you prefer that. The code is in Python.

Continue reading “Decoding The 8088” →

Who Needs Sea Monkeys? Get PlanktoScope

October 8, 2023 by 10 Comments

Plankton are tiny organisms that drift around in the ocean. They aren’t just whale food — they are responsible for fixing up to 50% of the world’s carbon dioxide. That, along with their position as the base of many important food chains, makes them interesting to science. Unfortunately, they are tiny and the ocean is huge. Enter Planktoscope. Billed as “an affordable modular quantitative imaging platform for citizen oceanography,” the device is a software-controlled microscope with the ability to deal with samples flowing through.

The software is in Python and uses existing libraries for user interface, image processing, and other tasks. The computing hardware is in the form of a Raspberry Pi. There are actually two prototypes of PlanktoScope available.

Continue reading “Who Needs Sea Monkeys? Get PlanktoScope” →

Auto Xylophone Uses Homemade Solenoids

October 8, 2023 by 26 Comments

Want to play the xylophone but don’t want to learn how? [Rachad]’s automatic xylophone might be just the ticket. It uses homemade solenoids to play tunes under computer control. Think of it as a player piano but with electromagnetic strikers instead of piano keys. You can hear the instrument in action in the video below.

Since the project required 24 solenoids, [Rachad] decided to build custom ones using coils of wire and nails. We were amused to see a common curling iron used as an alternate way to apply hot glue when building the coils. The other interesting part of the project was the software. He now uses a toolchain to convert MIDI files into a serial output read by the Arduino. Eventually, he wants to train an AI to read sheet music, but that’s down the road, apparently.

Honestly, we were a bit surprised that it sounded pretty good because we understand that the material used to strike the xylophone and the exact position of the strike makes a difference. We doubt any orchestra will be building one of these, but it doesn’t sound bad to us.

The last one of these we saw did have more conventional strikers if you want to compare. Honestly, we might have just bought the solenoids off the shelf but, then again, we don’t make our own relays either.

Continue reading “Auto Xylophone Uses Homemade Solenoids” →

Blaupunkt Tube Radio Is The Sultan Of Radios

October 8, 2023 by 16 Comments

According to [M Caldeira], the Blaupunkt Sultan 24300 was one of the last tube radios made in the 1960s. He’s got one but it needed some tender loving care, and you can see how he approaches a restoration like this in the video below.

The radio was actually in better shape physically than most of the old radios we see. It wasn’t perfect, but it looked good on the outside. Electrically, though, it did need some work, and the dial had problems, too. The first obstacle was identifying exactly the model of the radio since there were a number of Sultan radios produced.

Continue reading “Blaupunkt Tube Radio Is The Sultan Of Radios” →

Fluid Simulation Does The Math

October 6, 2023 by 2 Comments

If you like math, you should enjoy [kynd’s] page about simulating fluid in p5.js. You might still enjoy the pretty colors and shapes if you aren’t into math. What’s scary is that the page promises to have as little math as possible, but there’s still quite a bit. Of course, we are sure you could go even deeper down the rabbit hole.

The algorithm’s core is a pair of 2D arrays representing cells that comprise the display area. One array holds the color of the cell, while another holds a velocity vector of the fluid in the cell. A vector, of course, has both a magnitude and a direction.

Continue reading “Fluid Simulation Does The Math” →

Hackaday Podcast 239: Overclocking, Oscilloscopes, And Oh No! SMD Out Of Stock!

October 6, 2023 by 2 Comments

Elliot Williams and Al Williams got together again to discuss the best of Hackaday for a week, and you’re invited. This week, the guys were into the Raspberry Pi 5, CNC soldering, signal processing, and plasma cutting. There are dangerous power supplies and a custom 11-bit CPU.

Of course, there are a few Halloween projects that would fit in perfectly with the upcoming Halloween contest (the deadline is the end of this month; you still have time). OpenSCAD is about to get a lot faster, and a $20 oscilloscope might not be a toy after all. They wrap up by talking about Tom Nardi’s latest hardware conversion of DIP parts to SMD and how TVs were made behind the Iron Curtain.

Did you miss a story? Check out the links below. As always, tell us what you think about this episode in the comments!

Go ahead and download it!

Where to Follow Hackaday Podcast

Places to follow Hackaday podcasts:

Continue reading “Hackaday Podcast 239: Overclocking, Oscilloscopes, And Oh No! SMD Out Of Stock!” →

An SMD Capacitor Guide

October 5, 2023 by 5 Comments

For electronics, your knowledge probably follows a bit of a bell curve over time. When you start out, you know nothing. But you eventually learn a lot. Then you learn enough to be comfortable, and most of us don’t learn as much about new things unless we just happen to need it. Take SMD components. If you are just starting out, you might not know how to find the positive lead of an SMD capacitor. However, if you’ve been doing electronics for a long time, you might not have learned all the nuances of SMD. [Mr SolderFix] has been addressing this with a series of videos covering the basics of different SMD components, and this installment covers capacitors.

If you are dyed-in-the-wool with SMD, you might not get a lot out of the video, but we picked up a few tips, like using a zip tie for applying flux. The video starts with an examination of the different packages and markings. Then it moves on to soldering the components down.

Continue reading “An SMD Capacitor Guide” →