McLVDT: A Straw-based Sensor

We saw [Kevin’s] home-built Linear Variable Differential Transformer in a YouTube video last week and wanted to know more. We’re in luck, he agreed to share all the details as well as a bunch of information on these sensors. An LVDT is used to measure distance along a straight path. Unlike a linear optical encoder, this method uses measurements of inductance between two electrical coils to judge the distance.

[Kevin] used some magnet wire wrapped around two straws of different diameter to fabricate his sensor. A signal generator is connected to the primary coil and the resulting signal induced in the secondary coil is measured to reveal the change in physical position. Check out the video after the break to see the results.

It’s not hard to get your hands on a McDonald’s straw (hence the name ‘Mc’LVDT), a smaller inner straw, and a few feet of magnet wire. This will be a fun one to try when those dark winter days start to get to you.

Continue reading “McLVDT: A Straw-based Sensor” →

Joystick Controlled Alarm Clock

While it may sound like a dirty joke, turning off the alarm clock with a wiggle of your joystick is entirely possible here. [Sean] was inspired by the light gun alarm clock featured in Make magazine a while back and decided to build something similar. Instead of going the light gun route, he chose to use a joystick. You set the time on the clock using the joystick and the fire button works as a snooze button. Though it currently doesn’t have a snooze-waggle feature, it could without too much effort.

[Sean]’s server is small. He notes in his comments that he can’t handle the traffic from us. This is why we had to find it our selves instead of him submitting it. Tsk Tsk. To help, we have included the few other pictures of his build after the break. If you really want to overload his poor little server, you’ll find the link to his site here, instead of at the beginning of the article.

Continue reading “Joystick Controlled Alarm Clock” →

Minimalistic Circuit Design

[David Terrill], whose exploits we have covered before, has shared with us his techniques for building circuits without a prototype or bread board. [David] managed to incorporate a Dual D flip-flop at the heart of the circuit, as well as an impressive number of transistors, diodes, and other passive components. Unfortunately, the circuit diagram is a little low resolution to really make out the real function, but based on the components, our best guess is a two-output blinking circuit. Maybe for an encore, someone out there will build a circuit built entirely around a battery so that it can be a self-contained system.

Let us know if you have a better copy of this schematic, or a guess at what the circuit does!

Control Your Tree From Anywhere

We honestly never thought we would see an internet controlled Christmas tree before, sure maybe a remote controlled claw or online soccer robots, but a tree? Regardless, team [Schwippy] did just that. 5 separate sets of lights are connected to 5 individual x10 modules. The x10s are listening over the household’s AC lines for commands from a server in the other room, with its own x10. At about 12$ a module, the project can get expensive quick, totalling over 200$ for [Schwippy’s] setup. Just to control a tree, but anything to spread the holiday cheer, right?
[Thanks Yon]

Pink Wireless-terminal Of Wonder

[Hunter Davis] is at it again, this time hacking the pink IM-ME to use as a wireless terminal. It sells for between $12-16 and he ordered it to get free shipping with another purchase. The wireless antenna registered as an HID device when he plugged it into his Linux box. He then sat down for a long USB sniffing session only to be surprised by the lack of any type of security. Everything transferred to the device is just plain text in hexidecimal. Because of possible DMCA issues he hasn’t posted a driver but does explain most of the process to write your own.

[Hunter] has given us a lot of handheld hacks. This device is meant as a remote terminal for instant messaging. We’re sure you can think up a lot better uses so let us know in the comments and don’t forget to send in any projects you come up with.

[Thanks Paul]

DS Based Reader For The Blind

[Epokh] has release some homebrew software that uses a Nintendo DS as a voice reader for documents. This is extremely useful for blind and visually impaired folks who normally use screen readers but can utilize this technology for reading books, documents, and email on the go. Future versions look to add an email client and implement OCR via the camera for reading documents on the go.

The flite package is utilized to provide the text to speech functionality. We’re familiar with this package and judging by the video after the break, it lost nothing in the port to the DS hardware. [Epokh] pointed out that similar readers can cost $1500 when a DS sells for around $130. We can’t wait to see the final version fleshed out!

Continue reading “DS Based Reader For The Blind” →

Robo-one Dance Competition

[youtube=http://www.youtube.com/watch?v=3z6a3oxKDiQ]

This year at the creepy robot dace-a-thon, also known as the Robo-one dance competition, we get to see the creepy brought to new levels. We thought the Lou Vega decapitated head bot was creepy, but somehow these people managed to make a biped out creep a hexapod. Watch above as this uncanny valley resident tries to shimmy into your heart. We really are impressed by these bots though. The world of robot dancing has come a long way, those little servo bags are doing a better job than us on the dance floor.