Wheels And Weed Whackers


Perhaps you’ve seen this image before: a young kid tooling around on a pair of inline skates, pushed forward by a weed whacker cycle. While the instructions for this device would seem fairly obvious (attach wheel to weed whacker) the writeup appears to be nonexistent. If you have any information, do let us know, but in the meantime, enjoy these other weed whacker powered projects.

Continue reading “Wheels And Weed Whackers” →

Flipstart HSDPA Mod


Our friend [tnkgrl] has successfully added HSDPA to a Vulcan Flipstart. The Flipstart is a palmtop Windows machine with 1.1GHz Pentium M, 512MB RAM, 30GB hard drive, and an EVDO option. Before starting, you need to come up with a mini-PCI Express HSDPA card. Instead of trying for a random bare mini-PCIe card on eBay, she purchased an unlocked AT&T Sierra Wireless Aircard 875U USB dongle. Inside of the dongle is a battery, SIM slot, and a mini-PCI Express card. The Flipstart lid comes off with just a few screws and the card drops into place. Even though the antenna isn’t tuned for all the possible bands you should still get good signal most of the time. The best part of this mod is that it doesn’t require any obvious modification, so your warranty will be intact… as far as anyone can tell. Embedded below is the video of the easy swap. In the past, she added HSDPA to the OQO 02, which definitely takes a lot more work.

Continue reading “Flipstart HSDPA Mod” →

Wii Dual NAND Flash Hack


[ChipD] successfully installed two NAND flash chips into his Wii. He can keep the stock firmware on one and then flip a switch if he wants to boot using the other chip with a modified firmware. This hack is fairly straight forward. All it took was someone with steady hands to try it out. The new NAND chip is identical to the original and was salvaged from a flash drive. The chips were soldered as a stack except for the chip enable pin. The chip enable from each chip is attached to a small switch to toggle between which is active. You could use a TSOP socket to swap the different chips, but it wouldn’t fit inside the Wii case. This little switch could be hidden easily next to the GameCube ports.

CRT Blinkenlights


[Julien] sent in his group’s twist on the now classic blinkenlights project. Oddly, the writeup is entirely in jpg form, so I can’t know if he’s finished it yet. One of them promised to send it in during our New uses for old CRT monitors HackIt, so it’s nice to hear something about it. While the classic blinkenlights uses building windows as pixels, this version divides CRT displays into four squares.

Bionic Senses


Various cybernetic limb and organ replacements were recently featured in IEEE’s flash demo called The Bionic Body Shop, but we were most interested by the bionic eye and the cochlear implant (we already discussed the featured powered exoskeleton). These are notable for the fact that they are not merely high-tech prosthetic replacements strapped to or worn on the body, but implants that are housed within the body and work with flesh-and-blood sense organs on a much closer level than any preceding technology.

Continue reading “Bionic Senses” →

Obsolete Technology Band


Radiohead held a contest for fans to remix the single Nude from their album In Rainbows. Frontman Thom Yorke mentioned on NPR that the contest was essentially a joke, since the Nude track is recorded at 6/8 timing and 63bpm, much slower than traditionally mixed music. The above video from [James Houston] is one of the most creative entries. Using old computer hardware he has recreated the track in a very unique way. He uses a Sinclair ZX Spectrum for the guitar track, a dot matrix printer for the drums, a scanner for bass, and a hard drive array for vocals.

Want to make your own band with obsolete technology? Click through for a few pointers to get you started.

Continue reading “Obsolete Technology Band” →

HP Color LaserJet 2600n Teardown


In the ongoing quest to find parts for new projects by scavenging old devices, the curiously sane and benevolent team at Evil Mad Scientist Laboratories took apart an HP Color LaserJet 2600n. They wanted to see what makes it tick and what parts can be culled from it for later use.

Continue reading “HP Color LaserJet 2600n Teardown” →