A researcher in a safety harness pollinates an American chestnut tree from a lift. Another researcher is on the other side of the lift and appears to be taking notes. The tree has bags over some of its branches, presumably to control the pollen that gets in. The lift has a grey platform and orange arm.

Hacking Trees To Bring Back The American Chestnut

“Chestnuts Roasting on an Open Fire” is playing on the radio now in the Northern Hemisphere which begs the question, “What happened to the American chestnut?” Would you be surprised to hear there’s a group dedicated to bringing it back from “functional extinction?” [via Inhabitat]

Between logging and the introduction of chestnut blight, the once prevalent American chestnut became increasingly uncommon throughout its traditional range in the Appalachians. While many trees in the southern range were killed by Phytophthora root rot (PRR), the chestnut blight leaves roots intact, so many chestnuts have been surviving by growing back from the roots only to succumb to the blight and be reborn again. Now, scientists are using a combination of techniques to develop blight-resistant trees from this remaining population.

The American Chestnut Foundation recognizes you can’t improve what you can’t measure and uses a combination of “small stem assays (SSAs) performed on potted seedlings, improved phenotype scoring methods for field-grown trees, and the use of genomic prediction models for scoring resistance based on genotype.” This allows them to more rapidly screen varieties for blight resistance to further their efforts. One approach is based on conventional plant breeding techniques and has been crossing blight and PRR-resistant Chinese chestnuts with the American type. PRR resistance has been found to be less genetically complicated, so progress has been faster on resistance to that particular problem. Continue reading “Hacking Trees To Bring Back The American Chestnut”

Waves crash near a rocky shore. Large, SUV-sized blue "floaters" sit in the water perpendicular to a concrete pier. The floaters look somewhat like a bass boat shrink wrapped in dark blue plastic and attached to a large piston and hinge. A grey SUV sits on the pier, almost as if for scale.

US Is Getting Its First Onshore Wave Power Plant

Renewables let you have a more diverse set of energy inputs so you aren’t putting all your generation eggs in one basket. One type of renewable that doesn’t see a lot of love, despite 80% of the world’s population living within 100 km (~60 mi) of a coastline, is harnessing the energy of the tides. [via Electrek]

“The U.S. Department of Energy’s National Renewable Energy Laboratory estimates that wave energy has the potential to generate over 1,400 terawatt-hours per year,” so while this initial project won’t be huge, the overall possible power generation from tidal power is nothing to sneeze at. Known more for its role in shipping fossil fuels, the Port of Los Angeles will host the new wave power pilot being built by Eco Wave Power and Shell. Eco Wave’s system uses floaters to drive pistons that compress hydraulic fluid and turn a generator before the decompressed fluid is returned to the pistons in a nice, tidy loop.

Eco Wave plans to finish construction by early 2025 and already has the power conversion unit onsite at the Port of Los Angeles. While the press release is mum on the planned install capacity, Eco Wave claims they will soon have 404.7 MW of installed capacity through several different pilot projects around the world.

We covered another Swedish company trying to harness tidal power with underwater kites, and if wave power isn’t your thing but you still like mixing water and electricity, why not try offshore wind or a floating solar farm? Just make sure to keep the noise down!

Hacking The Soil To Combat Desertification

While the Sahara Desert is an important ecosystem in its own right, its human neighbors in the Sahel would like it to stop encroaching on their environment. [Andrew Millison] took a look at how the people in the region are using “half moons” and zai pits to fight desertification.

With assistance from the World Food Program, people in Niger and all throughout the Sahel have been working on restoring damaged landscapes using traditional techniques that capture water during the rainy season to restore the local aquifer. The water goes to plants which provide forage during the 9 drier months of the year.

The main trick is using pits and contouring of the soil to catch rain as it falls. Give the ground time to absorb the water instead of letting it run off. Not only does this restore the aquifers, it also reduces flooding during during the intense rain events in the area. With the water constrained, plants have time to develop, and a virtuous cycle of growth and water retention allows people to have a more pleasant microclimate as well as enhanced food security. In the last five years, 500,000 people in Niger no longer need long-term food assistance as a result of these resiliency projects.

If this seems familiar, we previously covered the Great Green Wall at a more macro level. While we’re restoring the environment with green infrastructure, can we plant a trillion trees?

Continue reading “Hacking The Soil To Combat Desertification”

Enhiker Helps You Decide If Its A Good Day To Hike

Many of us check the weather before heading out for the day — we want to know if we’re dressed (or equipped) properly to handle what Mother Nature has planned for us. This is even more important if you’re going out hiking, because you’re going to be out in a more rugged environment. To aid in this regard, [Mukesh Sankhla] built a tool called Enhiker.

The concept is simple; it’s intended to tell you everything you need to know about current and pending conditions before heading out on a hike. It’s based around Unihiker, a single-board computer which also conveniently features a 2.8-inch touch screen. It’s a quad-core ARM device that runs Debian and has WiFi and Bluetooth built in, too. The device is able to query its GPS/GNSS receiver for location information, and then uses this to get accurate weather data online from OpenWeatherMap. It makes some basic analysis, too. For example, it can tell you if it’s a good time to go out, or if there’s a storm likely rolling in, or if the conditions are hot enough to make heat stroke a concern.

It’s a nifty little gadget, and it’s neat to have all the relevant information displayed on one compact device. We’d love to see it upgraded further with cellular connectivity in addition to WiFi; this would make it more capable when out and about.

We’ve seen some other neat hiking hacks before, too, like this antenna built with a hiking pole. Meanwhile, if you’ve got your own neat hacks for when you’re out on the trail, don’t hesitate to let us know!

Nebraskan Farmers Were Using Wind Turbines Before Environmentalism Was Invented

To a casual observer of public discourse here in 2024 it seem extremely odd that the issue of replacing coal fired power stations with wind turbines is a matter of controversy, whether in America or Europe it’s an issue which causes some sparks to fly. The Atlantic has a recent article with a set of pictures from a gentler time in which the industrious nature of Nebraskan farmers in the 1890s receives praise as they create a wide variety of home-made wind turbines.

Farmers have always been the best hardware hackers, using what they have at hand to solve their problems and create the things they need. Perhaps out image of agricultural wind power is one of commercially produced wind pumps, but these are the generation of home-made devices which preceded that. Some of them look conventional to modern eyes, but others such as the horizontal “Jumbo” turbines have little equivalent today.

It’s easy to forget with so many energy sources at our disposal, that in the past the locality affected the choice of motive power. The Netherlands doesn’t have windmills because they are pretty, but because hundreds of years ago they lacked handy coal mines or convenient heads of water. Similarly out in the Nebraskan prairies they had plenty of wind, and never the folk to pass up on an opportunity, they made the best of it. And we’re very glad over a century later, that someone took the time to record their work.

If you’re hungry for more old-style wind power, we’ve got you covered, meanwhile 19th century America was no stranger to clever ways to use power.

Thanks [Hugh Brown] for the tip.

An image of a desert with dramatically cloudy skies. In the middle of the image is a series of clay doorways with vertically-oriented wooden slats surrounding a central pole. These form the basis of a panemone windmill.

Help Wanted: Keep The World’s Oldest Windmills Turning

While the Netherlands is the country most known for its windmills, they were originally invented by the Persians. More surprisingly, some of them are still turning after 1,000 years.

The ancient world holds many wonders of technology, and some are only now coming back to the surface like the Antikythera Mechanism. Milling grain with wind power probably started around the 8th Century in Persia, but in Nashtifan, Iran they’ve been keeping the mills running generation-to-generation for over 1000 years. [Mohammed Etebari], the last windmill keeper is in need of an apprentice to keep them running though.

In a world where vertical axis wind turbines seem like a new-fangled fad, it’s interesting to see these panemone windmills are actually the original recipe. The high winds of the region mean that the timber and clay structure of the asbad structure housing the turbine is sufficient for their task without all the fabric or man-made composites of more modern designs. While drag-type turbines aren’t particularly efficient, we do wonder how some of the lessons of repairability might be used to enhance the longevity of modern wind turbines. Getting even 100 years out of a turbine would be some wicked ROI.

Wooden towers aren’t just a thing of the past either, with new wooden wind turbines soaring 100 m into the sky. Since you’ll probably be wanting to generate electricity and not mill grain if you made your own, how does that work anyway?

Continue reading “Help Wanted: Keep The World’s Oldest Windmills Turning”

LEAF Mission Seeks To Grow Plants On The Moon

Space Lab's LEAF model crops & growth chamber.
Credit: Space Lab

We have seen a recent surge of interest in whether it’s possible to grow potatoes and other plants in Martian soil, but what is the likelihood that a future (manned) lunar base could do something similar? To that end [Space Lab] is developing the LEAF project that will be part of NASA’s upcoming Artemis III lunar mission. This mission would be the first to have Americans return to the Moon by about 2028, using the somewhat convoluted multi-system SLS-Starship-Lunar Gateway trifecta. The LEAF (Lunar Effects on Agricultural Flora) science module will feature three types of plants (rape (Brassica Rapa), duckweed and cress (Arabidopsis thaliana) ) in an isolated atmosphere.

The main goal of this project is to find out how the plants are affected by the lunar gravity, radiation and light levels at the landing site at the south pole. This would be the equivalent of a hydroponics setup in a lunar base. After about a week of lunar surface time the growth chamber will be split up into two: one returning back to Earth for examination and the other remains on the surface to observe their long-term health until they perish from cold or other causes.

This is not the first time that growing plants on the lunar surface has been attempted, with China’s Chang’e 4 mission from 2019. The lander’s Lunar Micro Ecosystem featured a range of seeds as well, which reportedly successfully sprouted, but the project was terminated after 9 days instead of the planned 100 due to issues with heating the biosphere during the brutal -52°C lunar night. Hopefully LEAF can avoid this kind of scenario when it eventually is deployed on the Moon.