Junkyard Tube-amp Gold!

November 21, 2011 by Mike Szczys 20 Comments

Why, oh why, oh why do people toss out awesome retro hardware?? Luckily, [Dino] visited the junk depot himself at just the right time. Even though you’re not supposed to take things others have dropped off he poached the retro portable turntable that was just sitting there. He cracked it open and figured out how to turn it into this great tube guitar amp without going to all that much trouble.

The original turntable used to be where the front grates are in the image above. The guitar amp version sits the case on end, which works perfectly since the carrying handle is now on the top. This orientation would have put the amplifier hardware upside down, so [Dino] pulled it out and flipped it around. The speakers for the turntable were made to sit separately and be connected with wires. But they also doubled as a lid for the unit. This makes them the perfect size to fit side-by-side in the void left by the turn table.

[Dino] records his own music for the build video after the break using his new hardware. Sounds great, looks great, and it was saved from being needlessly buried in the ground. Fantastic!

Continue reading “Junkyard Tube-amp Gold!” →

Electronic Recorder Conversion

November 16, 2011 by Mike Szczys 19 Comments

As we wrote the title to this feature we can see why [Jeff Ledger] calls it an electronic flute and not a recorder; this is a musical instrument and not something for archiving audio. Confusion aside, we’re all familiar with these plastic ‘musical’ instruments. Many elementary schools in our area require students to buy one as part of music class. So it shouldn’t be hard to find one if you want to try this for yourself (heck, [Jeff] grabbed his a the dollar store).

Basically, he’s replaced the finger holes with momentary press switches, then uses a Propeller dev board to turn the button presses into music. It’s simple and quick, but what does it for us is the breath actuator. Sure, you can set this up to play whenever a button is depressed, but [Jeff] went that extra mile and added a piezoelectric element to the bottom. When you blow through the instrument it flexes slightly, generating a tiny current that can be measured by the microcontroller. Check out the short clip after the break.

Do a little more work and you could turn this into some type of musical game controller. We’re thinking Zelda!

Continue reading “Electronic Recorder Conversion” →

Bullhorn Mod Lets You Disperse Angry Crowds To The Dulcet Tones Of [Kenny G]

November 10, 2011 by Mike Nathan 11 Comments

megaphone-mod-aux-audio-in

[Randy] had a cheap megaphone, and like most models in this price range, it didn’t have an audio input jack on board. He wanted the ability to pipe both music and audio from an external mic through the megaphone, and in a brief tutorial, he shows how he modified his bullhorn to do just that.

Most megaphones carry their electronics near the built-in mic, just outside the battery compartment. Removing the screws from the cap in [Randy’s] model revealed a circuit board and a couple of wires connecting it to the on board mic. His megaphone happened to play some canned music from a secondary circuit board, and he spliced in an audio jack with a built in cutoff switch between that and the main PCB. He also added a resistor in between his jack and the microphone circuitry to attenuate the line level signal properly. Once he reassembled everything, and then tested his input using a portable audio player, slowly ramping up the volume to the desired level.

It’s not every day that you require the ability to blast music through a bullhorn, but [Randy’s] modification is a great addition when you do need it.

Arduino-based MIDI Synth

November 8, 2011 by Mike Szczys 2 Comments

[Charles Gershom] has been tinkering around with his keyboard and Arduino in order to build his own version of a MIDI controlled synthesizer. It looks like he’s gutted the enclosure of some commercially available MIDI hardware to use for the project. This works nicely since it gives him both the MIDI and audio jacks that he needs. The box also provides a nice control surface where a set of four LEDs indicates the synth mode currently in use. There are also four potentiometers mounted on the panel, but they’re not yet up and running.

Check out the video after the break to see what this can do so far. [Charles] shows the device synthesizing sounds coming in from the keyboard. It is also used to playback the audio from Super Mario Bros. which is fed in by a music notation program on a computer. Only one voice is playing when this happens which makes us think this can only handle one channel at a time right now (but we could be wrong).

Continue reading “Arduino-based MIDI Synth” →

Wireless MIDI Piano Glove

November 7, 2011 by Brian Benchoff 9 Comments

Sometimes you just don’t have space for a baby grand. [Abdullah] got around this problem and built a virtual wireless MIDI piano. Unlike it’s inspiration, it’s not bad but we still love it.

[Abdullah] got his hands on some flex sensors and attached them to a glove. These resistive sensors are put through a voltage divider and sent to a microcontroller (a PIC16F778, we believe) and corresponding MIDI notes are chosen. These MIDI notes are sent to a computer and played over a speaker.

Right now, only a single arpeggio is coded into the microcontroller. Depending on which finger is bent shifts this arpeggio up and down the keyboard. That being said, the firmware can be easily modified to recognize standard piano fingering so chords can be played. The only issue is moving the hand up and down the keyboard.

[Abdullah] is planning on making his glove completely wireless with a microcontroller and battery sewn into the glove. Here’s to hoping he’ll keep us posted.

Check out [Abdullah]’s demo after the break.

Continue reading “Wireless MIDI Piano Glove” →

DIY Drum Triggers & Recreating [Bonzo]’s Vistalites

November 4, 2011 by Brian Benchoff 1 Comment

[Rob] has been working on his drum trigger build, and he’s finally decided to share it with us. His drum heads and triggers don’t look like anything we’ve ever seen, but he’s pretty confident he has a good kit in the works.

The first unconventional of the build is the drum triggers. The triggers are piezo elements folded up or cut down to fit inside highlighter bodies. These piezo/highliter/drum triggers were filled with melted candle wax to make sure the piezo doesn’t rattle around. [Rob] seems to have taken an empirical approach to cutting up piezo elements – smaller elements are less responsive, so they’ll be used for the zones of the drum head.

[Rob]’s drum heads are made from tennis and badminton raquets. The implementation is actually kind of clever: [Rob] restrings the raquets on the bias to vary the feel and responsiveness of the head. Check out the Flickr photoset of the build here.

The ultimate goal of [Rob]’s build is a “glass” drum set certainly inspired by [John Bonham]’s Vistalites. Whenever [Rob] puts up a video playing Moby Dick on his new kit, we’ll be sure to put it up.

Annoy Your Sound Guy Even More

November 1, 2011 by Brian Benchoff 39 Comments

“I can’t hear myself in the mix,” “yeah, man, I’ll be there at 8,” and “dude, we need like four more mics.” Each and every one of these words is documented in actuarial tables and doesn’t bode well for your sound tech’s risk of a stroke. Luckily, there’s an even better way to kill your sound guy and this time, it’s actually pretty clever.

[@dop3j0e] at the Stuttgart hackerspace Shackspace came up with the Noiseplug. It’s a very small build that could almost fit into a quarter-inch jack. It’s all SMD with a tiny ~~(unknown)~~ ATtiny9 microcontroller powered by a watch battery.

The music coming out of the Noiseplug is really interesting. All the code on the microcontroller is a one-liner written in C. Similar ‘algorithmic chiptune’ programs can be run on any PC: check out these three examples.

These potential entries to the International Obfuscated C Code Contest throw chars into an 8-bit PCM stream. Piping the output of these programs to /dev/audio would generate an actual song – written entirely in one line of C.

Of course, [@dop3j0e] could have made his Noiseplug a little less annoying, but sound techs are underappreciated for a reason, right?

Check out the Noiseplug in action after the break along with a few one-liner C songs.

Continue reading “Annoy Your Sound Guy Even More” →