The Surprisingly Simple Way To Steal Cryptocurrency

January 6, 2023 by Jenny List 78 Comments

In the news a few days ago, the revelation that Luke Dashjr, a core Bitcoin developer, had his wallet compromised, and lost 200 BTC. A small fortune, and something of a shock. I’m guessing that someone with that expertise would not have left his private key lying around, so as a cryptocurrency non-enthusiast I’m left curious as to how the attackers might have done it. So I phoned a few friends who do walk those paths for an explanation, and the result was a fascinating conversation or two. The most probable answer is still that someone broke into his computer and copied the keys — straight-up computer theft. But there’s another possible avenue that doesn’t involve stealing anything, and is surprisingly simple. Continue reading “The Surprisingly Simple Way To Steal Cryptocurrency” →

N-O-D-E Unveils Slick Tech News Site

January 5, 2023 by Tom Nardi 24 Comments

There’s probably some axiom in professional journalism that says you shouldn’t give out free advertisement to your competitors — but since none of us have any formal training in this kind of thing and are just making it up as we go along — we’re more than happy to plug the brand-new MOSFET.net.

Created by the mysterious hacker [N-O-D-E], the site is exceptionally minimal, providing an experience not entirely unlike a feed reader. Each story has a main image, a few sentences that describe what it’s about, and the ever-important link to the original source. There’s even a color filter applied on the images so they aren’t jarring when compared to the site’s monochrome color scheme. (If that all sounds familiar, it’s because Hackaday came up with the idea 18 years ago. But it’s cool, we’re not salty or anything.)

In all seriousness, the site looks very well done and will no doubt be a great resource for the community. A particularly interesting feature is that entries expire automatically after 30 days. This speaks to the goal [N-O-D-E] has for MOSFET.net — it’s designed to show you relevant tech news, and literally nothing else. The focus and simplicity is beautiful.

Here’s wishing all the luck to [N-O-D-E] in this new venture. We know better than most that it can be a difficult and sometimes thankless job, but we wouldn’t still be doing it all these years if it wasn’t worth the effort. The tech world is always growing and there’s plenty of room for everyone. In fact, a recent peek at the analytics revealed that Hackaday got more views in 2022 than at any time in its history. As far as we’re concerned, the future looks bright for everyone.

Continue reading “N-O-D-E Unveils Slick Tech News Site” →

KiCad 2022 End-of-Year Recap And 7.0 Preview

December 31, 2022 by Joseph Long 22 Comments

[Chris Gammell] moderated the KiCad 2022 End-of-Year Recap with several KiCad developers and librarians. They reviewed what’s been bubbling up in the nightly KiCad 6 builds, what we can expect from KiCad 7, and even answered some questions from the user community. Over the course of 2022, the KiCad project has grown both its development team and library team. The project even has a preliminary support commitment from the CERN Drawing Office!

Improvements to the KiCad Schematic Editor include smart wire dragging that simplifies moving components around within schematic diagrams. Components selected in the schematic now remain selected while switching to the PCB Editor. Internal documentation of schematics has advanced with support for fonts, embedded graphics, and the inclusion of hypertext links to datasheets and other reference materials. New features for PDF generation offer interactive files and links between sheets.

A new search panel within the KiCad PCB Editor supports finding components by footprint, net, or text search. A property panel allows common properties to be edited across multiple selected items. While a full-blown auto-router remains outside of the scope for KiCad, “push and shove” routing is faster and easier. An “attempt to finish” feature routes a quick connection for the currently selected trace, and “pack and move” positions all selected footprints into proximity to simplify placing them as neighbors within the board layout.

The KiCad PCB Editor also adds support for the use of fonts and inverted “knockout text” which even works on copper zones. Bitmap graphics can be imported and scaled beneath layout work as reference illustrations. Private footprint layers can be used to place extra documentation within footprints. The design rule checker (DRC) now can catch more layout issues, especially those that may impact manufacturability.

These are just a sampling of the impressive improvements we can expect with KiCad 7.0. There are also additions to circuit simulation and modeling features, a new command line interface for script-based automation, ARM64 support for KiCad running on Apple silicon, and a huge number of additions to the default library including symbols, footprints, and 3D Viewer models.

The KiCad team suggests several ways to support the project. There are always needs for additional developers and librarians. Financial contributions can be made at kicad.org. As users, we can run the nightly builds, try to break them, and give feedback in the form of detailed bug reports. Community testing will help make KiCad 7.0 as solid as possible. The project team is also seeking open hardware projects to include with KiCad 7.0 as demos. For example, the StickHub project was included with KiCad 6.0 as a demo.

The official release of KiCad 7.0 is currently scheduled for January 31, 2023. While we wait, let’s flashback to our January 2022 presentation of what features made it into the KiCad 6.0 release.

Continue reading “KiCad 2022 End-of-Year Recap And 7.0 Preview” →

Robot Rebellion Brings Back BBC Camera Operators

December 30, 2022 by Jenny List 22 Comments

The modern TV news studio is a masterpiece of live video and CGI, as networks vie for the flashiest presentation. BBC News in London is no exception, and embraced the future in 2013 to the extent of replacing its flesh-and-blood camera operators with robotic cameras. On the face of it this made sense; it was cheaper, and newsroom cameras are most likely to record as set range of very similar shots. A decade later they’re to be retired in a victory for humans, as the corporation tires of the stream of viral fails leaving presenters scrambling to catch up.

A media story might seem slim pickings for Hackaday readers, however there’s food for thought in there for the technically minded. It seems the cameras had a set of pre-programmed maneuvers which the production teams could select for their different shots, and it was too easy for the wrong one to be enabled. There’s also a suggestion that the age of the system might have something to do with it, but this is somewhat undermined by their example which we’ve placed below being from when the cameras were only a year old.

Given that a modern TV studio is a tightly controlled space and that detecting the location of the presenter plus whether they are in shot or not should not have been out of reach in 2013, so we’re left curious as to why they haven’t taken this route. Perhaps OpenCV to detect a human, or simply detecting the audio levels on the microphones before committing to a move could do the job. Either way we welcome the camera operators back even if we never see them, though we’ll miss the viral funnies.

Continue reading “Robot Rebellion Brings Back BBC Camera Operators” →

Decentralized Chaos In Germany

December 28, 2022 by Elliot Williams 17 Comments

When you’re planning an event with 15,000 hackers in a tight space these days, the COVID logistics can take the wind right out of your sails. And so the Chaos Computer Club decided, for one more year, to put aside plans for the traditional year-end Chaos Communications Congress. In it’s place this year? Everyone is doing their own thing, together but apart, for the “Dezentrale Jahresendveranstaltungen”.

Some local clubs are putting on local events, some of them have talk streams, and it’s all happening everywhere and at once. If you’re not near one of the roughly 30 locations in Europe that are doing something live – check out the streams. But be warned, there’s a lot to process!

Maybe it’s best to start with the schedule, where you can see what’s coming up next. Live streams are going on throughout, until Dec 30. If you missed a talk, you can check out the pre-release versions on Relive, but note that start times and end times are approximate, so you might need to seek around. And once they’re edited and polished up, they’ll show up on the permanent event playlist, which is still just getting started as we write this.

Right now, we’re watching a talk in German about how to program laser shows, but yesterday there were some great talks on subjects as varied as the history of the C language, how perimeter cybersecurity is dead, how to find the Norwegian prime minister in an “anonymous” dataset, and how Hackaday friend [Dave Darko] made his LED dodecahedron that he was showing off at Supercon.

In short, there’s a lot going on. Check it out.

Non-Replaceable Battery? Not If This Proposed EU Law Passes!

December 24, 2022 by Jenny List 104 Comments

A disturbing trend in consumer electronics has been a steady disappearance of replaceable batteries on our devices. Finding a mobile phone with a swapable battery is a struggle, and many other devices follow the trend by sealing in a Li-Po cell. The result is an ever-shorter life for electronics, and a greater problem with devices going to recycling or worse still, landfill. Hope is at hand though, thanks to a proposed European Union law that would if passed make batteries in appliances “designed so that consumers can easily remove and replace them themselves“.

In case any readers in the rest of the world wonder what it has to do with them, the EU represents such a huge market that manufacturers can neither ignore it, nor in most cases afford to make separate EU and rest-of-world versions of their products. Thus if the EU requires something for sale in its territories, in most cases it becomes the de facto norm for anything designed to be sold worldwide. We’ve already seen this with the EU’s right to repair legislation, and while we have not doubt that manufacturers will do their best to impede this new law we don’t think they will ultimately prevail.

Via 9to5Mac.

A Hacker’s Christmas Story

December 24, 2022 by Elliot Williams 11 Comments

Twas the night before Christmas, and because I decided to make everyone’s presents myself this year, I’m still working like mad to get everything done before the big deadline. Why do I do this to myself? Well, partly because I enjoy the process.

My wife had this idea that we can make the older folks some fun decorative blinky things, and picked some motives. My son then drew them out on paper, and I scanned those drawings in and traced them over in CAD. We then cut the shapes out of wood on the CNC router, which turned out to be incredibly successful. (Now that I’ve done it, I wouldn’t be surprised if all of those “quirky” decorative objects that the Swedish flat-packers sell aren’t initially sketched out by third graders.)

Then my son painted them, and it’s my job to insert the twinkling. I bought some of those three-wire “fairy lights” for the purpose, and they’re really fun to hack on. They’re like WS2812s, only instead of using four pins and shifting the data downstream, they’re on a bus, each with a hard-coded address – they know where they are in the string and each LED only listens for the Nth set of 24 bits. This means sending 200 color codes just to light up the 4 LEDs in Aunt Micki’s decorative tree, but so be it.

Last stop, and still to do as of the 23rd, route out some kind of wooden battery case, wedge in the LiPo and the charging circuits, and solder on an on/off switch. It’s down to the last minute, but isn’t that always the way?

Definitely would have been easier just to order something online. But is that the spirit of giving? No! The DIY way brings the family together, gets me some quality time with the CNC machine, and tones up my FreeCAD skills. My son even looked over my shoulder as we were coding some of the LED animations. And nothing says Christmas like hand-coded blinkies.

Happy Holidays, y’all!