Bounty On Bus Pirate Features, Get A Free V2 PCB

March 25, 2009 by Ian 21 Comments

bpv2

We’re putting a bounty on two high-priority Bus Pirate features. You can get a free PCB for the upcoming Bus Pirate V2 by writing a bit of code. Hack a Day has a varied and talented group of readers, and we know someone out there has the experience to make these changes with minimal difficulty.

The latest code integrates the PIC24F bootloader for easy updates without a programmer. We’d like to add a protocol snooper, but that requires interrupts. With the bootloader, however, interrupts are relocated and we’ve yet to fully grasp how that works. We’ll send a PCB and PIC 24F to the first person who modifies the code to demonstrate UART, SPI, or change notification interrupts with the boot loader. Microchip’s 24F bootloader app note is available here. Complete.

The current frequency measurement feature is a hack that uses a counter and a timer. Be the first to implement the input capture peripheral instead, and get a free PCB. See the function bpFreq(void) in base.c. Complete.

The latest Bus Pirate code and compiled firmware can be checked-out from Google Code SVN. Submit your code via the comments below or buspirate@hackaday.com.

UPDATE: Both issues were resolved. Thanks for your suggestions.

External Keyboard With An IPhone

March 24, 2009 by Caleb Kraft 34 Comments

iphone

Using an IR keyboard is now possible with a non jailbroken iPhone. The folks at perceptive development have developed a custom interface that connects through the headphone jack. They had already developed the serial modem, so this was just another step at connecting peripherals. With some smart and small packaging, this could be a nice attachment to keep around. You can see a video of it in action after the break.

Continue reading “External Keyboard With An IPhone” →

Hackit: Xbox 360 Hardware Failures On The Rise?

March 19, 2009 by Eliot 51 Comments

e74xbox

Joystiq has been tracking the new starlet of Xbox 360 failures: the E74 error. It appears as the lower right light on the console turning red and an on-screen message telling the user to contact support with the error E74. The number of reported E74 errors seems to have risen since August 2008 and people are wondering if the more recent increase in errors are related to the release of the New Xbox Experience (NXE) Dashboard update. Did Microsoft reclass Red Ring of Death (RROD) failures as E74 to avoid warranty replacements? Continue reading “Hackit: Xbox 360 Hardware Failures On The Rise?” →

CupCake CNC Kit

March 16, 2009 by Caleb Kraft 29 Comments

cupcake

The CupCake CNC Kit is the flagship product of MakerBot industries, a joint venture between [Bre Pettis] and [Zach Hoeken]. At $750, it comes with all the motors, belts, body pieces, bearings, belts, and other pieces to assemble it. You could be printing your own 3d objects in a matter of hours with this. 3D printers with only slightly larger capacities can run thousands of dollars. The only advantage to some of the commercial products might be resolution. They don’t give much as far as technical data as the unit isn’t available yet. They should start Shipping before April 15th, so they can’t be far off. This could possibly be a competitor for the RepRap. Since RepRap doesn’t offer a complete kit, we’ll have to speculate. We’ve seen estimates from $500 to $1000 to build one.

[via adafruit industries blog]

Glowing Patch Cables

March 14, 2009 by Caleb Kraft 32 Comments

[youtube=http://www.youtube.com/watch?v=zi3lpVzM-bM]

[Sleepydog] just sent in this cool video of a patch cable he made with a built in EL wire. He’s using a Power over Ethernet router to control which ports have power. He states that this would allow easy identification of specific cables in the mess. While the proof of concept seems completely functional, and the idea is nice, we have to wonder if the cost to put in all the extra hardware would be worth it. Each cable would have to have its own inverter, not only driving up cost, but possibly adding interference. That does not mean we don’t want this desperately, we do. But we want it just because it looks cool. He needs to choreograph this to some music now and make his entire server room into a fancy display.

3rd Generation IPod Shuffle Teardown

March 13, 2009 by Caleb Kraft 12 Comments

shuffle

You should all know the drill by now. New electronics hit the market and someone has to post pictures of it spread open bit by bit. The new shuffle is no different as iFixit shows us. There are some very nice pictures of the entire process. As you can see, most of the space is taken up by the battery. The thing that is probably most striking here is the main problem that many people have with it; there aren’t any buttons.

[via Makezine]

Laser Etched Kindle 2

March 13, 2009 by Caleb Kraft 25 Comments

kindlesketch1

After seeing the xkcd comic where they call the Kindle2 the hitchhiker’s guide, [Ladyada] couldn’t help but laser etch the Kindle 2 with “Don’t Panic”. We think it looks pretty good, if a bit bubbly. You can see the video of the entire process after the break. Now that xkcd has infiltrated our interwebs, hearts, and minds, maybe he can put just a tiny bit of effort into learning to draw. If you don’t have access to a laser etcher, you could always make your own. Just be careful you don’t accidentally go full out and cut your kindle to shreds.

Continue reading “Laser Etched Kindle 2” →