Homemade UAV

uav

[Terence Bordelon] sent in his impressive UAV (Unmanned Arial Vehicle). The hack is a culmination of his other projects. It can be turned to fully automatic at the flip of a switch. It will fly itself to gps way points, land, and take off. The UAV has a range of 100km thanks to his home built RF Unit which runs on ham bands. The brains of the setup is his custom IMU (Inertial Measurement Unit). The unit is controlled by his ground station which either allows him to fly it normally or toggle through the various modes.  [Terrence] is also a game developer and has worked on many popular titles such as Zoo Tycoon 2 and Ratchet and Clank.

Vintage Video: Computing Across America

roberts

in 1983, [Steve Roberts] packed up a Tandy 100 laptop and a 5-watt solar panel, fleeing suburbia on his recumbent bicycle on what would become a 17,000 mile journey that forever cemented his place in the geek pantheon…not just as a technology hacker, but as one of the preeminent “life hackers,” pursuing his own dreams on his own terms and inspiring others to do the same.

In this 1989 video, recently unearthed by Hack a Day, [Roberts] reflects on the first 16,000 miles of his voyage, detailing some of the technology that went into his then-current ride, the Winnebiko II.

Continue reading “Vintage Video: Computing Across America”

GPS USB Port Repair

IMG_0524

[Jair2k4] learned the hard way not to lend out your expensive GPS to untrustworthy people. His Garmin 200 was returned with a broken USB port and unable to charge. Luckily, all it took was some inventive thinking and he had it repaired in no time. By breaking open a Nokia cellphone car charger, he had a source of 5 volts. After that, it was only a matter of soldering the connections. However, not content with the design he pulled out a Dremel and mounted it in his 1991 Suzuki Sidekick. Quick, dirty, and actually working afterwords, just the way we like it.

Modified RX7 Dimmer Control

SANY00191

We were a little surprised when we learned the Mazda RX7’s high beams were controlled by ECU, compared to typical cars using just a toggle switch. Ubermodder [Trent Bruce] realized how much of a pain in the rear end this can be if the ECU ever burns out, meaning no brights. By using a D-Flip Flop setup in a toggle configuration, he is able to control his once lost high beams. He also points out that if you plan to do any other electronic modifications to the RX7, you should be sure to pay attention to the unusual ground switching and the other crazy wiring under the hood.

700 Lumen LED Bike Lamp

700_lumen_bike_lamp

We’ve seen bright bike lamps before. This one caught our eye because it needs a heat sink while in operation. [700lumenLED] built a super bright light for his bike that features an aluminum enclosure and heat sinks to protect the LEDs against overheating.  Some nice work was done incorporating the 12v battery into a bike bottle with the power switch and a dimming potentiometer attached to the bottle cap.

Homebrew Carputer

Avbrand's Carputer

Though not from scratch, [Avbrand] integrated a powerful set of tools into his Subaru station wagon. The system was compiled from off the shelf electronics, such as a Compaq notebook, 3G USB modem, touch screen, and an assortment of other peripherals. It is based around Windows XP, though most of the carputer-specific applications, such as backup camera integration, Google Maps – based car tracking, and automatic volume control had to be custom coded by [Avbrand] himself. Perhaps the single most impressive and useful feature of the system is synchronization with highway traffic cameras. The system streams video of segments of the highway before [Avbrand] gets to them, allowing him to make more informed navigational choices. He documents it pretty well on his website.

Zelo, The Improbable Wooden Trike

The earliest bicycles were made from wood. Nearly two centuries later, some garage tinkerers still turn to this most traditional of materials for their own creations, since welding one requires experience and tools beyond the reach of many. Resembling Gilligan’s Island props, the resulting bikes are both artistic and great fun, but not very practical for real use; often heavy, ill-fitting or lacking durability.

[Boris Beaulant’s] birch laminate Zelo, on the other hand, has cleaner lines than anything you’d see in an IKEA showroom. Not content with an ordinary two-wheeler, he’s tackled a three-wheeled recumbent trike, which requires even finer tolerances. Two months and over 1,300 miles later, the trike is still rolling strong through the French countryside, proving its mettle as legitimate transportation and not just a garage novelty. [Beaulant’s] build log (Google translation here) offers some insights into the development of this masterpiece, starting with prior woodworking projects (furniture, rolling toys and a children’s bike) and finding clever solutions to problems such as creating a mold of his own back for a custom-contoured seat.