Spin Peggy, Get 3D POV

August 9, 2010 by Jakob Griffith 19 Comments

We put a temporary ban on posting POV projects after receiving several LED spheres back in May. But we had to lift the injunction after seeing this superb Volumetric 3D POV display by [Wes Faler] and [Don Smith].

Their creative use of several readily available components adds to the alluring setup; the central elements being just a box fan and Peggy kit from EMSL. The video after the jump doesn’t really do the project justice, but if you missed it at Maker Fair Detroit and can’t make your own it’s the best you’re going to get.

Continue reading “Spin Peggy, Get 3D POV” →

3D Printing With Chemicals

July 15, 2010 by Jakob Griffith 45 Comments

From the horse’s mouth,

“In this lithography experiment light creates free radicals from phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide which induce polymerization of 1,6-hexanediol diacrylate.”

Or for those without a Chemical Engineering degree, light from a (high resolution) projector interacts with a special liquid, producing a hard polymer on the surface. A platform within the liquid is lowered, taking the layer of polymer with it. Shine the projector again to produce another layer: lather, rinse, repeat. Long story short, an atypical 3D printer using light on a very small scale.

You get the chemicals and lab equipment, we’ll get the laptop and projector, and for goodness sake [Jimmie] stop bumping the table.

[Thanks Tomas]

Mister Gloves, Gesture Input

May 19, 2010 by Jakob Griffith 8 Comments

This two handed glove input setup, by [Sean Chen] and [Evan Levine], is one step closer to achieving that [Tony Stark] like workstation; IE, interacting with software in 3D with simple hand gestures. Dubbed the Mister Gloves, the system incorporates accelerometer, push button, and flex sensor data over RF where an MCU converts it to a standard USB device, meaning no drivers are needed and a windows PC can recognize it as a standard keyboard and mouse. Catch a video of Mister Gloves playing portal after the jump.

While amazing, we’re left wondering if gesture setups are really viable options considering one’s arm(s) surly would get tired? Continue reading “Mister Gloves, Gesture Input” →

Multiple Material 3D Printing

May 9, 2010 by Mike Szczys 60 Comments

[youtube=http://www.youtube.com/watch?v=D4Yq3glEyec]

It’s no surprise that we’re wild about 3D printing, especially [Devlin]. Now we’re absolutely out of our minds for this multi-material polyjet machine that is featured in the video above. Before we go any further it’s worth mentioning that this post is not advertising, we just think this machine is unbelievable.

It is capable of printing 600 dpi in 3D using multiple materials at the same. Two types of rigid material, one like ABS and the other like polypropylene, as well as seven levels of a soft material all exist on the same print head. They can be deposited along with a support material at the same time. In the video you can see enclosures that come out of the printer with rubber-like padding already mounted in the hard plastic shell. They even show a bicycle chain that is fully assembled after printing. Cost for these machines? We don’t want to know, it’s just fun to dream about having unrestricted access to one.

Continue reading “Multiple Material 3D Printing” →

Makerbot Clone

April 19, 2010 by Mike Szczys 9 Comments

This table-top extruder was modeled after the Makerbot. Instead of laser-cut wood this is built from acrylic, uses salvaged rods from laser printers, some inexpensive stepper motors, and a homemade extruder. All said and done, [Peter Jansen] figures this build came in somewhere around $200-300. It may not look as nice, but at half the price of the Makerbot base kit you also get the fun of building from scratch. Hopefully your fabrication skills are up to the challenge. If so, you’ll be printing useful items soon enough.

I’m One Step Closer To Azeroth

April 1, 2010 by Mike Szczys 31 Comments

While looking for a way to injure his neck and live in the World of Warcraft all at once, [Gavan Woolery] came up with the idea for this virtual reality setup. That monitor, residing just inches from his eyes, is putting out 1080p at 120Hz. His plan is to pair up the motion sensing seen in the video after the break with an NVIDIA 3D Vision Kit for something close to total immersion.

To be fair, [Gavan] never mentions WoW, but we all know where this is going right?

Continue reading “I’m One Step Closer To Azeroth” →

Ditch The LPs And Build Your Own 3D Scanner

March 18, 2010 by Mike Szczys 22 Comments

Find yourself an old record player, a laser level, and a digital scanner and you can build a 3D scanner. That’s what [Rob] did. The camera and laser level are mounted on the turntable for steady rotation. The camera captures the vertical laser line traveling around the room by recording 30 fps at a resolution of 640×480. This data is then translated into a Blender 3D file via a Python script and the Python Image Library. You can scan a whole room or just a small object. The face above is the result of this image capture after a bit of processing. [Rob] found this worked best in the dark and when scanning surfaces that are not reflective.

Make sure you also check out the camera-and-projector scanning method.