World Smallest TV-B-Gone

July 4, 2009 by Zach Banks 41 Comments

uTVBG

The TV-B-Gone has proven to be a dangerous and versatile gadget. At Interactive Matter, they created an even smaller version with more sneaking potential. Called the µTVBG, it packs an entire TV-B-Gone in a 1.4 x 2.5 cm footprint and even has room for a programming header. He found some high-powered surface-mount IR LEDs that would match the original TV-B-Gone’s power. To drive the board, they used a CR1220 button battery on the bottom of the board. The whole thing is smaller than your thumb and should be easier to hide next time you wreak havoc.

Massive LED Screen Project

June 30, 2009 by Caleb Kraft 29 Comments

[youtube=http://www.youtube.com/watch?v=nILHGU1qJzY&eurl=http%3A%2F%2Fwww.basicmicro.com%2F&feature=player_embedded]

The folks over at basicmicro.com are working on a massive LED display. They currently have one 32×32 RGB panel working. It displays 50 fps at 140 hz but the one above is only running at about 24 fps. The final display will be 40 of these panels. This thing is going to be massive. We have to wonder how this compares, financially and performance wise, to the commercial signage that displays videos.

Parts: ShiftBrite RGB LED Module (A6281)

June 29, 2009 by Ian 11 Comments

shiftbriteii

Macetech’s ShiftBrite is a high-power RGB LED coupled with an Allegro A6281 backpack. The A6281 uses three 10bit pulse-width modulators to mix millions of colors using the red, green, and blue elements in the RGB LED. Multiple modules can be chained together for bigger projects, like the ShiftBrite table.

Below the break we demonstrate a ShiftBrite module using the Bus Pirate. For a limited time you can get your own Bus Pirate, fully assembled and shipped worldwide, for only $30.

Continue reading “Parts: ShiftBrite RGB LED Module (A6281)” →

Ikea LED Matrix

June 28, 2009 by Zach Banks 9 Comments

8x8

[Spikenzie] has created an 8×8 LED array that fits inside an ikea frame. He multiplexed the 64 red LEDs on a PCB with connections on the back. He then used a MAX7129, an LED multiplexer and driver, driven by a PIC over SPI to do animations and play pong. He then encased the array in laser-cut cardboard and white acrylic to get large dots. This entire assembly was then placed inside an Ikea RIBBA picture frame. The result is an aesthetic homebrew display that is easy to control.

Related: 64pixels are enough

Keychain GPS Finder

June 25, 2009 by Steve Watkins 7 Comments

gps keychain navigation

With a user interface consisting of two buttons and a three digit display, the GPS finder guides the user back to a saved location. Nine locations can be saved for navigation recall. Press a button to save location and press another button to recall. Each switch has a secondary function, for management purposes such as memory indexes and power features. An AarLogic GPS 3A module and AVR microcontroller make up the guts. With the popularity of Geocaching, this would make an impressive trinket; Leading the hunter to an undocumented treasure.

Things To Hack: Sub 100$ Toy Night Vision, Projector, And Tv Game

June 22, 2009 by Gerrit Coetzee 14 Comments

projector

Ars Technica writes about three new toys coming out this year: a sub 100$ projector, tv game, and night vision goggles. The projector runs at standard TV resolution, takes standard composite in, and outputs an okay picture. The night vision goggles are monocular but focus both eyes on a single RGB LCD. The goggles uses an array of IR LEDs instead of amplifying ambient light to see in the dark. Lastly, they have a standalone implementation of the arcade game Big Game Hunters. The rifle uses a sensor bar to do the motion tracking and features a 32MB rom to hold the game files.

Addressable RGB LED Strip

June 17, 2009 by Zach Banks 50 Comments

ledrgb

[Synoptic Labs] stumbled upon an RGB light strip with individually-controllable LEDs. The strip uses 5 volts and is controlled by an HL1606. Because the strips are hard to find, this chip is mostly undocumented and he had trouble driving the strip. He was unable to get it working until he met with [John Cohn], who had previously reverse-engineered the serial protocol. Working together, they released a library for the Arduino to drive the strip. So far, the library only supports fading each LED, the only known functionality. If more strips like these were available, constructing LED matrices would be much easier. Embedded below is a video of the strip fading through the rainbow.

Continue reading “Addressable RGB LED Strip” →