Month: January 2011

Binary Clock Using Logic Chips And Mains Frequency

January 16, 2011 by 29 Comments

[Osgeld] built himself a binary clock. He didn’t take the time to explain his project, but he did post beautifully hand-drawn schematics and pictures of the circuit (PDF) as he was building it. We’ve seen clock projects that use mains frequency as the clock source and that’s the route that [Osgeld] chose for his build. He started with a 9-12V AC wall wort as a power input. From there it’s just a matter of using a bridge rectifier to convert to DC, then a 7805 linear regulator to establish a steady 5V rail. A resistor and a couple of diodes allow him to pull the 60 Hz frequency off of the incoming AC, and then use a combination of 4000 and 7400 logic chips to count the pulses and keep track of the time.

Quiz-o-Tron 3000

January 16, 2011 by 19 Comments

Who would have known that being given the task of planning a holiday party at a wine bar would turn into a hacking project? Well, here’s how that happened. A committee was in charge of the festivities and had decided on doing a mock game show. It wouldn’t really feel like a game show unless you had a contestant lockout system where the first one to hit the button gets a light and a sound while the runners-up get nothing. This is where [RoysterBot] comes in. He built the Quiz-o-Tron from 4 “easy buttons” from staples and an Arduino. After having finished it, he found the system to be somewhat lacking in the excitement area. When a button was pressed it only lit an indicator on the main Quiz-o-Tron box. He decided to add a small circuit inside each of the Easy Buttons using a 555 timer and some LEDs to give them some better feedback. Apparently he was going to patch into the speaker as well, but didn’t have time to get that added.

[via Adafruit]

Improving A Hexapod Design

January 15, 2011 by 7 Comments

[JC] built himself a hexapod based on a project he found on the Internet. It worked fairly well, but was mechanically weak and prone to breakage. He set out to improve the design and came up with the unit seen above. It uses three servo motors to control the six legs, and walks quite well as seen in the quick clip after the break. It’s not quite as agile as the little acrobatic six-legger we saw yesterday, but the movement is quite pleasing and it’s capable of moving forward, backward, and turning. [JC’s] post is four pages in all so don’t forget to seek out his links for the construction, linkage, and servo control pages to find concept drawings, cad designs, and his thoughts on the process.

Continue reading “Improving A Hexapod Design” →

Two Generations Of Ocean-going ROV

January 15, 2011 by 19 Comments

[Eirik] wants to help inspire others to take on big projects to he sent in a link to his ROV project. He started it about one year ago and the image above shows the first generation. After the break you can see the video that the ROV captured during a couple of it’s initial voyages. They’re pretty clear and right off the bat you’ll see the little guy following a jellyfish. Like a lot of homebrew ROV’s [Eirik] is still searching for the right way to pass wires through the housing without leaks. He does okay so far, and has designed a nice cable spool for the topside tether, but some water does get in. He’s almost finished the second generation which re-designs the camera mount to aim downward so that what’s in frame is more interesting.

Continue reading “Two Generations Of Ocean-going ROV” →

Converting 8mm Film To Digital

January 15, 2011 by 24 Comments

Many of us have these old 8mm family videos lying around and many of us have lamented at the perspective cost to get them converted to digital.  [Paul] came up with a pretty slick way of digitizing them himself. He cracked open an 8mm projector and replaced the drive motor with one he could run at a much slower speed, allowing him to be able to capture each frame individually with his digital camera. He’s rigged his remote shutter control to the shutter of the projector so that it would be perfectly synchronized. There’s a video of it in action on the flickr page, and a video of the full 16,000 frame clip after digitization here.

[via Make]

R2D2 Wannabe Lacks Lightsaber Launcher, Autonomy

January 15, 2011 by 14 Comments

Is this what the lovable Star Wars droid would look like without its protective skin? This R2D2 inspired robot is another Olin College of Engineering (where that CNC cake decorator came from) build developed by [Nathaniel Ting] and his classmates. Alas, it lacks autonomy, relying on an operator for guidance. But we enjoy it for the build quality. Two motorcycle batteries supply DC motors on the two rear legs of the trike. It can be driven with a wireless Xbox controller or through a Python interface that also randomly plays droid audio clips from the movie. That’s a tilting projector on top, which would be used to show Princess Leia’s pleas for assistance. That is, after the operator plugs in an extension cord to power it up. Oh well, it’s still a lot of fun to watch. See for yourself after the break.

Continue reading “R2D2 Wannabe Lacks Lightsaber Launcher, Autonomy” →

ArduSpider Entertains Children And Exercises Pets

January 14, 2011 by 21 Comments

There are so many good things about [Jose Julio’s] robotic spider. It’s design is dainty yet robust, and the behaviors encoded in the firmware are nothing short of spectacular.

The body is built from a piece of balsa wood in between sheets of carbon fiber. The legs are carbon rods, using two servo motors for left and right leg movement, and a third servo which can move the intermediary legs like the roll axis of a plane. An IR sensor rides on the front for obstacle avoidance, with system control courtesy of an Arduino. For more hardware info check out his build log.

Don’t miss the video after the break. You’ll see that the little bot can be manually controlled, or allowed to roam free. As we said before, the behavior is fantastic. Not only has [Jose] programmed interesting characteristics like the spider getting tired and sitting down for a while, but when it is awakened it leaps into the air. The movements are fun to watch for human and feline alike; if only your house cat could be so lucky.

Continue reading “ArduSpider Entertains Children And Exercises Pets” →