Eye See You.

August 14, 2011 by Nick Schulze 13 Comments

So you want to add animated eyes to your next robot? Now you can.. Using ping-pong balls, some scrap plastic and 6 servo motors [Chris] has created these animatronic eyes along with some nifty animated eyebrows. To get motion emulating realism [Chris] created a 2 axis gimbal using plastic rings and some nuts and bolts. The eyes (ping-pong balls) are held in the gimbal and actuated using two servos each. The eyebrows use another pair of servos and some tubing covered in electrical tape as the actual eyebrow.

[Chris] Kindly goes through the entire build process including information for beginners such as servo motor control. The whole thing is controlled using a PIC 18F452 and circuit diagrams and code are all available on the site. Check out the video after the break to see the eyes in action, you will also find more videos describing the build process if you follow through the tutorial.

Continue reading “Eye See You.” →

Build Your Own Class AB Audio Amplifier

August 14, 2011 by Jeremy Cook 18 Comments

[Dino Segovis] wrote in to tell us about his “hack”, making an AB Audio Amplifier. The advantage of this particular amp is that the transistors never turn off, which would cause distortion. A full schematic is given in the article as well as a parts list. A complete “bill of materials” makes any circuit building project easier, especially for the beginner.

Although this is by no means a new circuit design, (a similar setup is used in car audio equipment) [Dino] does a great job of explaining how things work in the article itself and in the video after the break. He also gives some great tips about transferring your drawn circuit to a breadboard in a neat and organized way at around 5:00 in the video. Continue reading “Build Your Own Class AB Audio Amplifier” →

Playing SNES With An R/C Controller

August 14, 2011 by Brian Benchoff 5 Comments

Normally when we see an R/C transmitter used in a build we’re prepared for robots, quadcopters, or UAVs. [Alex] found a new use for his Futaba radio – hooking it up to his Super Nintendo.

We’ve seen a lot of builds using game controllers as interfaces to other hardware. The N64 media remote comes to mind, as does the NES iPod dock. Outside of a few builds to automatically win in-game currency for you, we haven’t seen much of anything to control a video game with additional electronics. [Alex]’s build happily bucks that trend, and technically gives the SNES an analog controller.

The build uses an mBed microcontroller to capture the radio’s button and stick positions. This is sent through a two shift registers to produce the 16-bit packet required of the SNES controller protocol. [Alex] posted all the software for his build, and from the looks of it the code seems pretty portable. [Alex] says he’s working on getting his Sega Saturn running with his Futaba, so we can’t wait to see some Panzer Dragoon action. Check out [Alex] demoing his controller with Gradius III after the break.

Continue reading “Playing SNES With An R/C Controller” →

Juice Bridge Powers Your Breadboard In A Snap

August 13, 2011 by Mike Nathan 28 Comments

juice_bridge_breadboard_power_bridge

[Quinn Dunki] got tired of messing around with wires when connecting things to her benchtop power supply, so she built herself useful little power bridge that plugs directly into any standard breadboard.

The board is small and simple, but quite useful all the same. It was built to power both sides of the breadboard, and it can be easily switched between an unregulated power supply and a regulated 5v supply. An ammeter can be attached to the board via a pair of pins she set aside, allowing her to easily measure the current draw of the entire circuit.

We think her “Juice Bridge” would be very useful to anyone who frequently prototypes on breadboards. In fact, it would be a fantastic beginner project since it involves etching and developing PCBs as well as some simple soldering, while resulting in a handy takeaway tool at the same time.

If you want to build one of your own, [Quinn] has the schematics and Eagle PCB files available for download on her site.

Making SATA Drives Work With A SCSI Backplane

August 13, 2011 by Mike Szczys 24 Comments

The problem of persistent and reliable storage plagues us all. There are a myriad of solutions, some more expensive than others, but a dedicated and redundant network attached storage solution is hands down the best choice for all problems except natural disaster (ie: fire, flood, locusts) and physical theft. That being said, the issue of price-tag rears its ugly head if you try to traverse this route.

[Phil’s] had his mind stuck on a very large NAS solution for the last ten years and finally found an economical option. He picked up a powerful motherboard being sold as surplus and a server enclosure that would play nicely with it. It came with a backplane for multiple hard drives that utilized SCSI connections. The cost and availability of these drives can’t compare to the SATA drives that are on the market. Realizing this, [Phil] completely reworked the backplane to make SATA connections possible. It’s an intense amount of work, but there’s also an intense amount of documentation of the process (thank you!). If doing this again his number one tip would be to buy a rework station to make it easier to depopulate the connectors and extraneous parts from the PCB. Since he needs to keep using the board, the old blow-torch trick is out of the question.

Obama-1 Desk Spy Satellite Aims For High Approval Ratings

August 13, 2011 by Jeremy Cook 22 Comments

This miniature “spy satellite” may not gain the ire of the Chinese People’s Army, but it will certainly look rad on your desk. Besides looking cool, this “satellite” is able to transmit video up to 300 feet away and has sun tracking solar panels for battery recharging. Additionally, it has a LED “thruster” and speakers.

One cool thing about this build is that the body was made out of a lamp from Goodwill. Recycled/thrift store enclosures always make a good addition to your project as they won’t break the bank. Additionally, they may yield some other bonus parts when taken apart. In this case, the lamp fit into the project scope perfectly, but anyone trying to duplicate it might not be so lucky.

Creative use of other household materials rounds out this build, with solar panels taken off home garden lights, and part of a nose hair trimmer used as the “thruster” body. This well-build project is a great example of how to convert household items into something totally different and unique.

[youtube http://www.youtube.com/watch?v=pGqTmnSP71U&w=470&h=349%5D

Head-to-head Mountain Climbing From The Safety Of Your Game Room

August 13, 2011 by Mike Szczys 21 Comments

Why risk frostbite and altitude sickness when you can marvel at the view from atop your own mountain climbing game?

[Jeff] built this delightful piece which you can see in action after the break. he combined several very simple ideas and he did it really well. The climbers are both mechanical. They grip the mountain’s face (which is covered with of carpet) with a tack pointed downward on the end of each limb. Their motion is provided by two tiny servos that make up the body of the climber. The two potentiometers in each controller directly affect the movement of the top and bottom limbs. The game plays music during the contest, and precisely detects a winner by sensing when an arm comes in contact with the metal snow cap at the summit.

Obviously weight was an issue during the design process. After some hemming and hawing [Jeff] decided to tether the climbers in order to avoid rolling a battery into each. But he overcame the issue with weighted cable management on the inside of the mountain.

Continue reading “Head-to-head Mountain Climbing From The Safety Of Your Game Room” →