Update: Open Source Pick-and-place

February 8, 2011 by Mike Szczys 5 Comments

[Tim’s] been busy moving his pick-and-place build toward completion. We looked in on the first version of the vacuum head back in October. Since then he’s ditched the camera enclosure which allows for more light and better mounting. The tip has been replaced by one from a pair of vacuum tweezers, and the whole thing is now mounted on a diy CNC machine. The video after the break shows it picking up that IC and moving it around the table. Looks like the part rotation feature is very accurate.

He mentions that the CNC he’s using is quite slow. We hope he checks out this printable Delta robot; hardware that is often used with pick and place machines.

Continue reading “Update: Open Source Pick-and-place” →

Mixed I/O Testing Module

February 8, 2011 by Mike Szczys 7 Comments

Needing to test the display interface for a multitude of different sensors [Fileark] built himself this analog and digital input/output simulator. Along the bottom is a double row of trimpots that adjust analog voltages. Each voltage is measured by the Arduino inside and its value is displayed on the graphic LCD screen to confirm that the hardware you’re testing is making correct measurements. There’s also digital I/O in two different forms. To the upper left are momentary push buttons but the DIP switch bank below that allows the same connections to be toggled on and off. It’s not an automated test bed, but if you’ve got a lot of I/O, or a lot of hardware to test this will save you some real time.

Don’t miss the demonstration video after the break.

Continue reading “Mixed I/O Testing Module” →

Theremin Midi Board Is Like Using Autotune

February 8, 2011 by Mike Szczys 8 Comments

[Steve Hobley] built a Theremin interface board that tracks pitch and volume. Using this setup he’s able to pass data over a midi interface which effectively converts the instrument into a non-contact midi controller. As we joked in the headline, this does allow for the use of autotune, by snapping notes that are sharp or flat to the center of the nearest pitch. But you should watch the video after the break to see [Steve] show off the other features as well. A keyboard can be used to seed a starting pitch, with arpeggios of several different tonalities built on top of it based on the input from the Theremin.

Want the details? Unfortunately you’ll have to pay for the schematics. But the concept is still just as interesting to read about, even if you don’t know what went into the system. Continue reading “Theremin Midi Board Is Like Using Autotune” →

FareBot – Android NFC Proof Of Concept

February 8, 2011 by Mike Nathan 12 Comments

farebot_logo

Upon learning that the Nexus S smartphone was equipped with a Near Field Communications NFC) radio, [Eric Butler] decided he would put the newly released Gingerbread SDK to good use. Focusing initially on ORCA fare cards used by several Washington state transit systems, he built an open-source application he calls FareBot, which can read data from any MIFARE DESFire branded cards. Utilizing the NFC radio in the Nexus S, he was able to dump all of the unprotected information from the fare cards, including the remaining card balance and the last 10 locations where the card was used.

The author hopes that his proof of concept application encourages other developers to expand on his project and to explore the data stored on transit cards around the world. While it is in its early stages, [Eric] would ultimately like to see this project expanded to allow the use of NFC-enabled smartphones as transit cards themselves via downloadable apps. He suggests that helping people understand the amount of data which can be freely obtained from these cards will eventually force the manufacturers to better inform consumers of the existing system’s shortcomings, which in turn might spur on smartphone-based transit initiatives.

Building A Better Spectrum Analyzer For Radio Enthusiasts

February 8, 2011 by Mike Szczys 12 Comments

This spectrum analyzer project seeks to improve the quality of tools available to amateur radio operators. A lot of thought has gone into the design, and those details are shared in the verbose project log. The case was originally a CATV link transmitter, but most of the controls seen above have been added for this build, with unused holes filled and finished to achieve the clean look.

One noteworthy part of the build is the time that went into building a rather complicated-looking 1013.3 MHz cavity bandpass filter. Despite the effort, the filter didn’t work. Details are a bit sketchy but it seems that some additional tuning brought it within spec to complete that portion of the device.

This certainly makes other toy spectrum analyzers look like… toys.

[Thanks William]

Arduino Asteroids

February 8, 2011 by Kevin Dady 17 Comments

[nootropic] has a new game out for hackvision, “Asteroids”! We covered the hackvision back when it first started appearing in October of 2010, and hardware wise it has not changed. It is still an Arduino (software) compatible system sporting a atmega328, video and audio out connections (uses the TV-out library), all on a nice printed circuit board that, with the buttons, resembles a game controller.

While its impressive enough to run arcade inspired games like space invaders, pong, and tetris while using Arduino and a library, Asteroids takes the game up a notch.

Features that make Asteroids well, Asteroids include a mod of the TV-out library so that bitmaps can fly over each other without erasing the pixels under them to give that old time vector arcade feel, and “point in polygon” style collision detection, which is a fantastic / efficient way of collision detection against irregular shapes, limited platform or not.

Last but not least, [nootropic] used the set_vbi_hook() function of the tv out library in sound design, going from simple “beeps” and “boops”, to “beeps” and “boops” on a constant 60Hz refresh (in the case of NTSC) that allows him to build more complex sound effects that give a nice arcade sound of explosions and laser blasts.

Join us after the break for a quick video, and remember, this is Arduino based so if you already have an Arduino, you can add the supporting hardware (buttons, resistors, and RCA jacks) and run any of the games currently offered, or make your own.

Continue reading “Arduino Asteroids” →

Upvote/Downvote Cards

February 8, 2011 by Mike Szczys 11 Comments

Next time you throw together a talent show consider using these cards for up and down voting. [Frits Rincker] came up with the idea over the weekend based on the like and dislike buttons of Facebook. They consist of some foam board with LEDs in the outline of a hand. He built a switch which completes he blue circuit for the thumb’s up and a red circuit for thumb’s down by using a weight that slides freely in a channel, with a reed switch at either end. We’ve embedded the video after the break for you enjoyment.

Oh, and in case you were wondering; Hackaday likes this.

Continue reading “Upvote/Downvote Cards” →