Live Out Your Inner Animist With Animatronic Cat Ears

February 21, 2012 by Brian Benchoff 43 Comments

While having a great white shark as your spirit animal may sound cool, we’ve found walking around in public wearing a gigantic set of mechanical jaws to be a bit of a hindrance. [abetusk] doesn’t have that problem; he can wear his awesome animatronic cat ears anywhere he pleases.

The build was inspired by these extremely Japanese animatronic ears loaded with EEG hardware to read the emotional state of the wearer. [abetusk] decided that tearing apart some brain scanning hardware was too much work for not enough benefit, so he decided servos controlled by push buttons would be just fine.

On the electronic side of the build, servos attached to a head band are controlled by an ATtiny13. A single button goes through three states for the ears: a long button press is surprise, a tap followed by a long hold is angry or sad, and tapping three times is an ‘ear wink.’ All of the code is up on GitHub, and you can check out these cat ear emotions with [abetusk]’s lovely assistant in the video after the break.

Continue reading “Live Out Your Inner Animist With Animatronic Cat Ears” →

Flash An Arduino From An SD Card

February 21, 2012 by Brian Benchoff 30 Comments

[Kevin] has been working on reverse engineering the protocol used by the Arduino IDE and porting it to the Arduino platform. Now that his BootDrive project is nearing completion, he’s ready to give every Arduino the ability to program another Arduino over an SD card.

BootDrive isn’t terribly different from using an Arduino as an ISP, only now AVRdude runs on the Arduino itself and no computer is required to put new firmware into the target Arduino. [Kevin] attached a MicroSD breakout board to an Arduino-compatible clone. When the clone starts up, it searches the SD card for a file called ‘program.hex.’ This file is sent over to the target Arduino and the new firmware is installed.

While it may not be extremely practical if you’ve only got a few Arduinos that never leave your workbench, we’re thinking this would be an invaluable tool if you need to update the software on a board already ‘in the field,’ serving as a weather station or homemade game camera. [Kevin] put up a demo of his BootDrive project; you can check that out after the break.

Continue reading “Flash An Arduino From An SD Card” →

[Dick Tracy]’s Watch Gets Night Vision

February 20, 2012 by Brian Benchoff 8 Comments

After getting his hands on an Android-enabled wristwatch, [Paul] wanted to test the limits of his new hardware. We’ll assume he’s happy with his purchase because his finished build sends data from a Microsoft Kinect to his wristwatch, making it a night vision spy watch.

[Paul]’s new toy is a WIMM One Android wristwatch that comes complete with wi-fi and a copy of Android 2.1. To get night vision onto his watch, a Kinect on [Paul]’s desk streams depth data to his watch using OpenCV. The result is a camera that gathers depth data in the dark and sends it to [Paul]’s watch.

Whenever the movement of an intruder is detected, [Paul]’s watch vibrates and displays the depth image taken from the Kinect. If the intruder gets close to the Kinect, the face is picked up and also sent to the watch. To get the intruder out of the room, [Paul] can tap the face of his watch to turn on a remote alarm and sound an intruder alert. It’s a very neat project that would have been unimaginable a few years ago.

Handheld CNC Fabrication

February 20, 2012 by Brian Benchoff 34 Comments

While loading a 3D model into a CNC program and letting a machine go to town on a piece of stock is awesome, there’s a lot to be said about the artistry, craftsmanship and tactile feedback of carving a project by hand. [Amit Zoran] and [Joe Paradiso] created a nice bridge between these two approaches with their hand-held, but still digitally controlled milling device they call The Free D.

The Free D looks like your run-of-the-mill handheld Dremel tool with an engraving attachment and a few extra servos attached for good measure. These extra parts serve a purpose: the tool actually keeps track of its own orientation in 3D space. With the help of a few magnets underneath the work piece, the Free D sends its orientation back to a computer running a CNC program. When the computer detects the engraving attachment is getting too close to the desired shape, the Free D automatically retracts its own tool head.

Given the insanity or expense in building our buying a mill with six degrees of freedom, the Free D looks like it could be a useful tool in a few model maker’s toolboxes. Check out the demo video of the Free D after the break.

Continue reading “Handheld CNC Fabrication” →

Hackaday Links: February 19, 2012

February 19, 2012 by Brian Benchoff 16 Comments

Industrial control robot band

Remember Animusic, a series of videos featuring computer-generated, highly implausible instruments? Intel made their own to demo their industrial control tech. From the looks of things, we’re putting money on a bunch of MIDI triggers bolted onto plastic panels; now it’s slightly less impressive and the reason we’re looking at xylophones on eBay right now.

Quadrocopters everywhere

[Jouni] sent in his quadrocopter build that was inspired by the Japanese spherebot we caught earlier this year. [Jouni] used a carbon fiber frame to prevent the copter from bumping into things. Other things bumping into it are another story entirely.

This is my gun. There are none like it, because I printed it.

[Landru] printed a Nerf gun on his 3D printer. The only non-printed parts are a few screws, springs and an o-ring. [Landru] promised to put the files up on Thingiverse, but we can’t find them.

Media center auto power on circuit

[Dizzy]’s media server doesn’t have an ‘AC power loss reset’ feature in its BIOS, and he can’t jumpstart the thing by shorting pins on the ATX power socket. He came up with a very clean, minimal solution to starting his server after a power loss. Nice job, [Diz].

Better run, better run, outrun my soldering gun

Alright, circuit board shoes probably aren’t that comfortable, or useful, but we did find a like to the works of [Steven Rodrig], an artist who works in the medium of PCBs. The recycled circuits don’t do anything, and that’s giving us a few ideas on how to improve a digital banana.

Ask Hackaday: Did You Catch The Grammys?

February 19, 2012 by Brian Benchoff 82 Comments

Although award shows aren’t necessarily our thing, [T. D.] sent in something that piqued our interest. His friends recently got back from the Grammy awards where they witnessed thousands of LED bracelets blinking in time to a performance by Coldplay. A little bit of YouTubing pulled up this video that demonstrates the effect (because that video will probably be taken down shortly, just pick something from this link).

[T.D.]’s friends brought one of these bracelets back with them and like a good Hackaday reader, he cracked it open. This is the precious board pic that [T.D.] sent in. We’re pretty confident that the IC is an ATMega48PA, but beyond that we’re not quite sure how these bracelets can, “light up and flash at precisely the right time” as [T.D.] puts it.

From what we saw on the Grammy broadcast, it’s possible these bracelets merely flashed whenever the user clapped their hands. A circuit that simple doesn’t require a microcontroller, so we’re left wondering what the heck is going on here. If you’ve got an idea of how these choreographed light display bracelets work, drop a note in the comments.

EDIT: Commentors have pointed out these wristbands are called ‘Xylobands.’ There’s a great video of these wristbands in action at the 2011 X Factor finale.

Control A Playlist With Your Mind

February 18, 2012 by Brian Benchoff 9 Comments

Because switching apps to change a song is such a taxing ordeal, [Oscar Celma] and [Ching-Wei Chen] decided to use their collective brainpower to change Last.FM playlists with their minds. They call their project Buddhafy, and it works by taking off-the-shelf EEG hardware and tying it into music streaming APIs.

For the build, the guys used a NeuroSky MindWave to read alpha waves inside [Oscar]’s head. The data from the MindWave was passed into a Python script that sends requests to the Last.FM and Spotify APIs. High alpha waves in brain wave patterns correspond with concentration or a deep meditative state. If [Oscar] concentrates very hard, he’ll be rewarded with calm and relaxing tunes. If [Oscar] loses focus, the music changes to the best song ever written.

The guys put up the slides from the presentation they gave at MusicHackDay in San Fransisco this last week. There’s also a video of their build in action; you can check that out after the break.

Continue reading “Control A Playlist With Your Mind” →