Stuff Wireless Charging Into A Nook’s Crannies

June 10, 2014 by Kristina Panos 21 Comments

Qi receiver for Nook Many technologies that come about for one type of product make us want to extend it to other things. For instance, we’d like the ability to remotely unlock our front door when it’s raining or our hands are full. Once [MS3FGX] experienced Qi wireless charging with his Nexus 5, he wanted the ability to wirelessly charge all the things. The first gadget on the list was his Nook Simple Touch eReader, which he successfully retrofit with a Qi receiver.

Space is at a premium inside of most modern technology. As it turns out, there is a burgeoning market for shoving inductive charging receivers into things. [MS3FGX] decided to try a Qi receiver meant for a Samsung S3, and it actually fits very well behind the battery. He glued it down and then cut a channel in the battery tray for the wires.

[MS3FGX] went full hack with this one and wired it to the Nook’s USB port on the inside. He would have preferred a thinner wire, but used some from a 40-pin IDE cable with little trouble. After the operation was complete, he put it on the Qi pad and it started charging right away. To his delight, the battery increased 20% after an hour. And yes, he can still charge the Nook the traditional way without any issues.

If you want to add wireless charging to any phone cheaply and easily, we’ve got you covered.

DIY Coffee Maker Filters Out Manufacturer Specificity

June 7, 2014 by Kristina Panos 12 Comments

Coffeemaker made from 3D-printed parts and scrap aluminium

This DIY electric coffeemaker prototype uses an assemblage of 3D-printed parts and cast aluminium. [siemenc]’s main goal with this project was to utilize and demonstrate recycling and re-usability. He used Filabot filament exclusively and melted down scrap aluminium such as cans, foil, and CNC mill waste in an oven he fashioned from an old fire extinguisher. He also cast the aluminium parts himself from 3D-printed positives.

Of course, he had to buy the things that make this a coffeemaker such as the hoses, the fuse, and the heating element. If you’re wondering why he didn’t salvage these parts from yard sale machinery, it’s because he wanted to be able to replace any part of it and have it last as long as he needs it to last. The innards he used are not specific to any model, so he should be able to easily find a replacement.

Just like a pour over set up, [siemenc] has fine control over the strength and quantity of the brew. We particularly like this machine’s exotic bird looks as well; it may be a prototype, but it’s quite stylish. If you’re looking to go all the way with DIY coffee, why not grow your own beans and then roast the beans yourself?

Solar Energy Provides An Outlet For Hurricane-Related Woes

June 3, 2014 by Kristina Panos 96 Comments

Hurricane season in the US Atlantic region officially began on June 1st. While [mikesoniat] is hoping for a mild one in his Gulf Coast town, he’d like to be as prepared as possible in the event of a power outage. He’s been experimenting with solar power lately, and while he’d love to go all out with some hefty system that could keep all his appliances running, solar outlet he’s not quite ready for that kind of investment. While thinking about this dream system, he noticed all the phone jacks around his house that he hasn’t used for several years. After consulting the phone company and researching the capabilities of 22-26AWG POTS copper lines, he devised a solar-powered system to provide enough power to run lights, fans, and a couple of phone chargers.

At the heart of this hack are two 12V solar panels, two 12V batteries in a weatherproof junction box, and a 100W solar charge controller. He started by re-wiring Ma Bell’s junction box up to the panels with thermostat wire. After prying out the RJ11 jack panels all over his house, he wired in regular outlets and marked them as 12V solar to avoid confusing his house guests. He was able to find 12V LED bulbs with standard bases, so all he has to do is screw in these bulbs and plug the lamps into his solar outlets. He also installed a floodlight outside and ran all of the wiring through the floodlight box.

To soak up more sun for this or any other solar hack, try a 2-axis solar tracker.

DIY Calligraphy Nibs Get Down To Brass Tacks

June 2, 2014 by Kristina Panos 8 Comments

diy calligraphy nibs Calligraphy is a rewarding hobby that is fairly inexpensive to get in to. For someone just starting out, poster nibs are a great way to practice making letterforms without worrying about applying the proper pressure required to use nibs that split. With a few tools, you can even make your own poster nibs like [advicevice] does in this Instructable.

Poster nibs are typically made with a single piece of brass that’s folded at the point where the nib touches the paper. The backside forms a reservoir that holds the ink. The other end is formed into a semicircular shank that is inserted into a nib holder. The nibs that [advicevice] made consist of two pieces of flat brass stock plus a section of brass tubing for the shank of the nib. One side of the nib is slightly thinner than the other to act as a reservoir. This keeps ink clinging to the nib through the magic of surface tension.

Nib construction is fairly simple. [advicevice] cut the brass stock to the desired length and width, cut notches with a jeweler’s saw to allow the ink to flow, and cut a piece of tubing that holds the nib snugly. He recommends using three grades of sandpaper on the edges of the brass stock and tubing. After soldering the nib to the shank, he beveled the business end by rubbing it on 150-grit sandpaper. He followed this with 350- and 600-grit papers to avoid injury and tearing the paper when writing.

If you simply must spend more money, build a machine that writes calligraphy for you.

Achievement Unlocked: Drill A Square Hole With A Rotary Broach

May 26, 2014 by Kristina Panos 18 Comments

There are times in a man’s life when he needs to drill a square hole through an 8mm thick piece of steel. If that man doesn’t have one or two thousand dollars to spend on commercial tooling to do this, he might just shrug his shoulders and make do with round holes. But if that man is [Chris], he rolls up his sleeves and makes his own tool to drill square holes with a rotary broach.

This tool that [Chris] has named the Wobble Drive drills a square hole by applying force to each of the corners of a square bit one a time. How, you might ask, did he achieve this? With a two-part tool and the power of offset driving. He took a cylindrical chunk of steel and bored a little cup for a ball bearing to move around in. He didn’t have one rolling around his tool box, so he liberated one from a 2209 double row self-aligning cylindrical bore with a screwdriver. Then he hammered a square rod of steel into a hole in the other end and made the rod’s bottom a little bit concave on the grinding wheel. He also took a little off the sides to aid the weeble wobble action. A second steel cylinder with a ball bearing cup sits in the chuck of his Bridgeport mill and wobbles the tool bit through the power of a 1/4″ offset.

[Chris] tested it on the same sacrificial plate he used to demonstrate the awesome power of Lil’ Screwy, his 100-ton homebrew press. He drilled a 3/8″ round pilot hole and then went to work with the Wobble Drive. The tool bit side proved to be too long to provide the requisite stroke, so he cut it down by about half. Once the tool has chewed through the steel, the tool bit decouples at the ball bearing and [Chris] has himself a square hole and that much more hacking cred.

Continue reading “Achievement Unlocked: Drill A Square Hole With A Rotary Broach” →

Solar-Powered Mosquito Birth Control Is Making Waves

May 18, 2014 by Kristina Panos 81 Comments

Mosquitoes really suck. Joking aside, they spread dangerous and deadly diseases like Malaria, Dengue and West Nile. They like to breed in pools of stagnant water which can be difficult to keep up with. From egg-laying to larval development, still water is vital for breeding mosquitoes. Instructables user [Gallactronics] hypothesized that disrupting the surface tension of potential nurseries was the key to discouraging breeding, and he built a solar-powered device for under $10 that proves his theory.

There are a few standard ways of dealing with standing water. Someone can keep it drained or it can be sprayed with pesticides. By aerating the water, mosquito mothers are far less likely to successfully arrange their eggs on the surface. Even if the eggs take, the turbulent water surface will suffocate the larvae.

This bubbler ticks all the boxes. It starts as soon as it comes in contact with water and sounds a piezo alarm when the pool has dried or when someone removes it. It runs for 10 minutes at 10-minute intervals using a 555 timer and some transistors. The water probes are stainless steel bolts, and it runs on a 6V 450mA solar cell. Be sure to watch the demonstration below.

We love to see this kind of ingenuity and elegance in problem solving. Then again, we also like the idea of killing them with lasers.

Continue reading “Solar-Powered Mosquito Birth Control Is Making Waves” →

These Trackpad Winamp Visualizations Really Whip The Llama’s Ass

May 17, 2014 by Kristina Panos 13 Comments

As much as we like a good clean Model M specimen, those curly-corded clicky behemoths are somewhat lacking for certain flavors of gaming. There aren’t any blank keys to override, and there sure isn’t a full-color trackpad that you can write apps for. [Gus] has such a keyboard: the Razer Deathstalker Ultimate which features the SwitchBlade UI. He made himself this sweet audio visualizer for it that extends Winamp visualizations to the Switchblade UI.

[Gus]’s hack is built on the Tiny3D visualization framework. It does what you might expect—reads the visualization values, sets them up for display on the trackpad, and renders them to said trackpad. [Gus] uses some of the 10 programmable keys to change colors on the fly, and the result is pretty awesome. As [Gus] points out, this is just the beginning of what the plugin can do. You’ll need the Razer SDK to get started, and you can get the other ingredients from [Gus]’s repo. Once you’re done with this, you could try auto-dimming your keyboard backlight.

Of course there are demo videos after the jump. Come on.

Continue reading “These Trackpad Winamp Visualizations Really Whip The Llama’s Ass” →