Vinyl Sales Ran Circles Around CDs In 2022

How do you take your music these days? For those in Camp Tangible, it seems our ranks are certainly growing, and in the analog direction. For the first time since 1987, vinyl record sales have outperformed CD sales in the US, according to a new report. The CD, which saved us all from the cassette, was a digital revolution in music. But for some, the love was lost somewhere among the ones and zeroes.

Those who prefer pure analog troughs of sound cut into wax have never given up on vinyl, and the real ones probably gobbled up a bunch of it in the 90s when everybody was CD-crazy. But mind you these aren’t used vinyl sales we’re talking about, which means that enough new vinyl has to have been readily available for purchase for quite some time now. Although it doesn’t really seem like that long, new vinyl’s been back for almost 20 years — and according to the report, 2022 was the 16th consecutive year of growth for record sales.

So Why Vinyl?

Nostalgia ain’t what it used to be, but there was a time in my 1980s childhood when vinyl was all this scribe had to listen to. I have historically been a bit slow to adopt new music formats — I didn’t have a CD player until 1998, and it was given to me for my birthday. I was excited to get the thing, mind you, especially since it had 10 seconds of anti-skip protection (which of course was a huge concern with portable CD players).

But CDs are way different from records. Sure, they’re both round, but the similarities sort of end there. For one thing, the artwork is disappointingly small compared to vinyl. And the whole gatefold album cover thing isn’t really possible with a CD, unless you forego the jewel case and release it in a chintzy little cardboard jacket. But then people will have this one disc that’s four times thinner than the rest and it throws everything off in the collection.

Continue reading “Vinyl Sales Ran Circles Around CDs In 2022”

Hackaday Podcast 208: Hallucinating Robots, Floppy Cartridges, And A Flexure Synth French Horn

This week, Editor-in-Chief Elliot Williams and [former Assignments Editor] Kristina Panos stood around talking about the greatest hacks of the previous week. But first, we’ve got a contest running now through March 21st — the Low Power Challenge!

Kristina almost got What’s That Sound this week, but could only describe it as some sort of underwater organ, so still no t-shirt for her. But [BalkanBoy] knew exactly what it was — the Zadar Sea Organ in Croatia. Then it’s on to the hacks, beginning with the most beautiful sea of 7-segments you’ll likely ever see. We gush over a tiny PC in a floppy drive that uses custom cartridges, dish about an expressive synth that uses a flexure mechanism, and enjoy a loving ode to the vacuum fluorescent display.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in  the comments!

And/or download it and listen offline.

Continue reading “Hackaday Podcast 208: Hallucinating Robots, Floppy Cartridges, And A Flexure Synth French Horn”

Illustrated Kristina with an IBM Model M keyboard floating between her hands.

Keebin’ With Kristina: The One Where Shift (Really) Happens

Hooray, the system works! [Sasha K.] wrote to let me know about their Thumbs Up! keyboard, which is the culmination of a long journey down the DIY rabbit hole to end game. (Seriously, it’s kind of a wild ride, and there’s a ton of pictures).

Thumbs Up! comes in both monoblock and full split versions, but both are designed for Kailh chocs. Fans of the Kinesis Advantage will dig the key wells and possibly the thumb cluster, which in this case is raised up a bit from the mainlands. I’m pretty fond of the naked PCB approach to keyboard building, especially when they’re stacked and look as good as these do.

While the full split only comes in RP2040 (not that there’s anything wrong with that), the monoblock split is available in Pro Micro, ATmega Mini, and RP2040 versions. You can find the STL for the tilt stand and other goodies on Thingiverse.

Continue reading “Keebin’ With Kristina: The One Where Shift (Really) Happens”

Illustrated Kristina with an IBM Model M keyboard floating between her hands.

Keebin’ With Kristina: The One With The Breadboard Macropad

For their first custom, hand-wired keyboard, [terryorchard] aka [70rch] didn’t want to mess with making a total split, and we don’t really blame them. However, as you can see, they ended up with a monoblock split, which aside from being our own personal preference, looks fantastic, and also happened to be what fit on the print bed.

What you’re looking at is a 40% remix of the Alice layout with a columnar stagger. It’s also a bit 6×3 Corne-inspired on the ergonomic front. Brain-wise, it’s got an exposed Elite Pi driving a matrix of Kailh Choc pinks and an EC11 encoder. The encoder scrolls by default, and then becomes a volume knob on the numbers and symbols layer. One super cool thing about this keyboard is the secret third layer, which is unlocked by pressing the rotary encoder. This leads to some home row mods and disables the outside columns, culminating in a test 3×5 with two layers.

Via KBD #112

Continue reading “Keebin’ With Kristina: The One With The Breadboard Macropad”

Hackaday Podcast 204: Cesium, Colorful Cast Buttons, And CNC Pizza

This week, Editor-in-Chief Elliot Williams and Assignments Editor Kristina Panos met up over thousands of miles to discuss the hottest hacks of the past seven days. There’s a whole lot of news this week, and the really good part is the the small radioactive source that went missing in Australia has been found. Phew!

Kristina is still striking out on What’s That Sound, but we’re sure you’ll fare better. If you think you know what it is, fill out the form and you’ll be entered to win a coveted Hackaday Podcast t-shirt!

Finally, we get on to the hacks with an atomic pendulum clock that’s accurate enough for CERN, safecracking the rough-and-ready way, and plenty of hacks that are non-destructive to nice, old things. We’ll gush over a tiny DIY adjustable wrench, drool over CNC pizza, and rock out to the sounds of a LEGO guitar/synthesizer thing.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in  the comments!

And/or download it and listen offline.

Continue reading “Hackaday Podcast 204: Cesium, Colorful Cast Buttons, And CNC Pizza”

Supercon 2022: Sophy Wong Is Making An Impact With Artistic Wearables

Prolific designer and maker Sophy Wong is always looking toward the future, and that goes for everything from the costume pieces she makes to the idea of making itself. In her excellent and highly-visual Supercon talk, Sophy explores both, and gives the viewer a window on her evolved-and-evolving design philosophy.

You likely know Sophy as That Maker Who 3D Prints On Fabric, a label she is quick to dismiss, pointing animatedly toward the seminal work of one David Shorey, who also happened to be at Supercon 2022. As Sophy explains, the process begins by modeling disconnected bodies to be printed, then printing the first layer and pausing the print. At this point, a piece of nylon mesh is inserted, and the print is resumed. The result is that the mesh is trapped between the first and second layers, and the bodies are now connected by a common thread. Carefully remove the sandwich from the print bed and you have a highly-flexible, mesmerizing piece of material that almost acts like chain maille.

Continue reading “Supercon 2022: Sophy Wong Is Making An Impact With Artistic Wearables”

DIY Custom Earplugs For Pennies Per Pair

Hearing is one of our most precious senses, and yet many take their hearing for granted, exposing themselves to loud noises that do lasting damage. [Jonathan Levi] of The Next Level does no such thing, at least not anymore. He’s even gone so far as to have custom acrylic earplugs made, which he carried around for two years, finally had them tweaked to be perfect, and promptly lost them. Rather than shell out another $150-$200 for another pair, [Jonathan] decided to see if he could make some himself.

While it’s true that [Jonathan] got a head start by asking the earplug company for the STLs they created back when he was fitted, he goes through the ways that one could mold and then scan one’s ears at home for not a lot of money. There are even kits for squirting that quick-setting goo into your ear to get just the right shape. Once you’ve got the ear canal positives, some quick photogrammetry work with your phone camera and a lazy Susan should be enough to get a model going in Blender.

[Jonathan] had the good sense to label left and right on the 3D printed mold, and furthermore added some small 3D printed screws that are color-coded to help him keep them plugs straight, and give him something to grab on to when it’s time to take them out. Be sure to check out the build video after the break.

Continue reading “DIY Custom Earplugs For Pennies Per Pair”