Bringing Some Discipline To An SDR Transmitter

The proliferation of software-defined radio (SDR) technology has been a godsend for RF hobbyists. SDR-based receivers and transmitters have gotten so cheap that you’ve probably got a stick or two lying around your bench right now — we can see three from where we sit, in fact.

But cheap comes at a price, usually in the form of frequency stability, which can be prohibitive in some applications — especially amateur radio, where spectrum hygiene is of the utmost concern. So we were pleased to see [Tech Minds] tackle the SDR frequency stability problem by using a GPS-disciplined oscillator. The setup uses an ADALM-PLUTO SDR transceiver and a precision oscillator from Leo Bodnar Electronics. The oscillator can be programmed to output a rock-solid, GPS-disciplined signal over a wide range of frequencies. The Pluto has an external oscillator input that looks for 40 MHz, which is well within the range of the GPSDO.

Setup is as easy as plugging the oscillator’s output into the SDR’s external clock input using an SMA to UFL jumper, and tweaking the settings in the SDR and oscillator. Not all SDRs will have an external clock input, of course, so your mileage may vary. But if your gear is suitably equipped, this looks like a great way to get bang-on frequency — the video below shows just how much the undisciplined SDR can drift.

Like any good ham, [Tech Minds] is doing his bit to keep his signals clean and on target. His chief use case for this setup will be to work QO-100, amateur radio’s first geosynchronous satellite repeater. We’ve got to say that we hams living on the two-thirds of the globe not covered by this satellite are just dying to get a geosynchronous bird (or two) of our own to play with like this.

Continue reading “Bringing Some Discipline To An SDR Transmitter”

A Handy Tester For A Mountain Of PS/2 Keybords

The hacking life is not without its challenges, and chief among these is the tendency to always be in acquisition mode. When we come across a great deal on bulk equipment, or see a chance to rescue some obscure gear from the e-waste stream, we generally pounce on it, regardless of the advisability.

We imagine this is why [Nathan] ended up with a hoard of PS/2 keyboards. Seriously, there are like thousands of the things. And rather than lug a computer to them for testing, [Nathan] put together this handy Arduino-based portable tester to see which keyboards still have some life left in them. The video below goes into detail on the build, but the basics are pretty simple — an Arduino, a 16×2 LCD display, and a few bits and bobs to run it off a LiPo pack and charge it up. Plus, of course, a PS/2 jack to plug in a keyboard and power it up. Interestingly, the 16×2 display is an old Parallax unit, from the days when RadioShack still existed and sold their stuff. That required a little effort to get it working with the Arduino, but in the end it works like a charm — plug in a keyboard and whatever you type shows up on the screen.

Of course, it’s hard to look at something like this, and that mountain of keyboards in the background, and not scheme up ways to really automate the whole test process. Perhaps an old 3D printer with a stylus mounted where the hot end would go could press each key in turn while the tester output is recorded — something like this Wordle-bot, but on a keyboard scale. That kind of goes against [Nathan]’s portability goal, but it’s still fun to think about.

Continue reading “A Handy Tester For A Mountain Of PS/2 Keybords”

The Digital Ham Hack Chat

Join us on Wednesday, July 13 at noon Pacific for The Digital Ham Hack Chat with Rosy Schechter and John Hays!

For most of its existence, amateur radio has been the quintessence of the analog arts. From the very earliest days of radio, hobbyists have been piecing together circuits to ply the radio spectrum, using whatever bits of RF wizardry they managed to pick up — or invent — along the way. From the architecture of the radios to the nature of the conversations they had over the airwaves, ham radio was very much an analog experience.

But if hams are anything, they’re resourceful, and they’ve got a long history of leveraging whatever the current state of the art happens to be. And so when electrical engineering began to dive into the digital world, so too did the hams. Radioteletype, facsimile, and other text-and-data modes lead to things like packet radio, which in turn gave us powerful tools like APRS, FT8, and PACTOR, upon which the current rich infrastructure of location reporting, weak signal digital contacts and beacons, and email service independent of an Internet connection have been built. There’s even a complete TCP/IP network using amateur radio as the physical layer, which even predates the widespread public Internet by many years.

Amateur radio always has been at the forefront of digital communications, but it takes work to keep hams in their leadership position in the field. To help with that, Amateur Radio Digital Communications (ARDC) was established. ARDC is a non-profit dedicated to supporting amateur radio and digital communication science and technology, chiefly through their programs of grants that are available to fund the development of technically innovative open and non-profit projects in amateur radio.

join-hack-chatFor this Hack Chat, ARDC Executive Director Rosy Schechter (KJ7RYV) and Staff Lead John Hays (K7VE) will be joining us to discuss the world of digital communications on the ham bands. Here’s your chance to share your experiences with digital modes, find out about what’s new in digital comms, and find out how to participate in the ARDC grant program and possibly fund the next big thing for the digital ham.

Our Hack Chats are live community events in the Hackaday.io Hack Chat group messaging. This week we’ll be sitting down on Wednesday, July 13 at 12:00 PM Pacific time. If time zones have you tied up, we have a handy time zone converter.

Continue reading “The Digital Ham Hack Chat”

Hackaday Links Column Banner

Hackaday Links: July 10, 2022

We always like to call out a commercial success stemming from projects that got their start on Hackaday.io, and so we’re proud to announce the release of MAKE: Calculus by Joan Horvath and Rich Cameron, a book that takes a decidedly different approach to teaching calculus than traditional courses. Geared to makers and hackers, who generally tend to have a visual style of learning, the book makes heavy use of 3D-printed models to illustrate the relationships between functions. The project started five years ago as a 2017 Hackaday Prize entry, and resulted in a talk at the 2019 Supercon. Their book is now available for preorder, and might be a great way to reacquaint themselves with calc, or perhaps even to learn it for the first time. Continue reading “Hackaday Links: July 10, 2022”

Sneeze Into Your Hand, Not Your Elbow With This Nose-Shaped Sanitizer Dispenser

You’ve got to love a language like German, where not only is it possible for a word or two to stand in for a complex concept, but you don’t even need to speak the language to make a good guess at what it all means. Of course when your project is a giant nose that mock-sneezes sanitizer into your hands, it doesn’t really matter that you call it Der niesende Desinfektionsmittelspender. Humor based on bodily functions is, after all, the universal language.

Working knowledge of German or not, figuring out exactly what [Nina] is doing here isn’t too difficult. Judging by the video below and the build log, the idea is to detect the presence of a hand underneath the dispenser with a simple IR reflective sensor hooked to some kind of microcontroller — an ESP32 in this case. Audio clips of sneezes are stored on an SD card and played back through a small speaker, while a hobby servo pushes the button on an atomizer. It seems as if selecting the proper dispenser was the hardest thing about the project; [Nina] finally settled on a battery-operated mister that was just the right size to fit into the nose. Oh, didn’t we mention the giant, pink, 3D-printed nose that houses the whole thing? Sorry about that — it’s quite subtle and easy to miss.

Anyway, the whole project is a lot of fun and brought a genuine laugh when we saw it. It’s a clever way to poke gentle fun at the germaphobes who came up with other, less whimsical methods of dispensing hand sanitizer. But let’s face it, they ended up being proven pretty much on the mark about things.

Continue reading “Sneeze Into Your Hand, Not Your Elbow With This Nose-Shaped Sanitizer Dispenser”

Hackaday Podcast 176: Freezing Warm Water, Hacking Lenses, Hearing Data, And Watching YouTube On A PET

It’s podcast time again, and this week Editor-in-Chief Elliot Williams sat down with Staff Writer Dan Maloney to review the best hacks on the planet, and a few from off. We’ll find out how best to capture lightning, debate the merits of freezing water — or ice cream — when it’s warm, and see if we can find out what R2D2 was really talking about with all those bleeps and bloops. Once we decode that, it’ll be time to find out what Tom Nardi was up to while the boss was away with his hidden message in episode 174, and how analog-encoded digital data survives the podcast production and publication chain. But surely you can’t watch a YouTube video on a Commodore PET, can you? As it turns out, that’s not a problem, and neither apparently is 3D printing a new ear.

The meat of Elliot’s “super secret mastering script”?  Use it on your videos too!

ffmpeg -i $infile.wav -c:v copy -af loudnorm=I=-17:LRA=5:tp=-1.5 -ar 44100 $outfile.flac

Direct download, record it to tape, and play it on your boombox.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Continue reading “Hackaday Podcast 176: Freezing Warm Water, Hacking Lenses, Hearing Data, And Watching YouTube On A PET”

Retrotechtacular: 1990s CD Mastering Fit For A King

Before it was transformed into an ephemeral stream of ones and zeroes, music used to have a physical form of some kind. From wax cylinders to vinyl discs to tapes of various sizes in different housings and eventually to compact discs, each new medium was marketed as a technological leap over the previous formats, each of which justified incrementally more money to acquire.

But that’s the thing — each purchase resulted in you obtaining a physical item, which had an extensive manufacturing and distribution process behind it. And few artists demanded more manufacturing effort than Michael Jackson in his heyday, as revealed by this in-depth look at the CD manufacturing process for The King of Pop’s release of the HIStory double-disc set in 1995.

The video was produced as sort of a love letter to Michael from the staff and management of the Sony Music disc manufacturing plant in Pittman, New Jersey. The process is shown starting with the arrival of masters to the plant, strangely in the form of U-matic videocassettes; the 3/4″ continuous loop tape was normally used for analog video, but could also be used for recording digital audio. The digital audio is then sent for glass mastering, which is where the actual pits are created on a large glass disc under cleanroom conditions. In fact, much of the production process bears a strong similarity to semiconductor manufacturing, from the need for cleanrooms — although under less stringent conditions than in a fab — to the use of plasma etching, vapor deposition, and metal plating operations.

Once the master stampers are made, things really ramp up in replication. There the stamper discs go into injection molding machines, where hot polycarbonate is forced against the surface under pressure. The copies are aluminized, spin-coated with UV-cure lacquer, and sent on down the line to testing, screen printing, and packaging. Sony hired 40 extra full-time workers, who appear to have handled all the tedious manual tasks like assembling the jewel cases, to handle the extra load of this release.

As cheesy as this thank-you video may be, it was likely produced with good reason. This was a time when a Michael Jackson release was essentially a guarantee of full employment for a large team of workers. The team was able to produce something like 50,000 copies a day, and given that HIStory sold over 20 million copies, that’s a lot of workdays for the good folks at Pittman.

Continue reading “Retrotechtacular: 1990s CD Mastering Fit For A King”