BSoDomizer Blue-screens Your Enemies

In case you were wondering what industrious hacker [Joe Grand] was doing when he’s not building stuff for Prototype This!, designing Defcon badges, or testifying before congress, it’s this: The BSoDomizer is a VGA pass through device that displays an image of your choice on the victim’s screen. It can do this either periodically or via an IR trigger. The image of choice is a Windows style Blue Screen of Death. It’s powered by a watch battery. The project site has all the schematics you need plus ASCII goatse imagery; you’ve been warned. Embedded below is a demo of the device. We unfortunately didn’t get to see it when it was originally presented during Defcon 16. Continue reading “BSoDomizer Blue-screens Your Enemies”

Flash Sync Port Hacking


Reader [Adrian] picked up a couple cheap wireless flash triggers on eBay. Unfortunately, his Sigma EF-500 DG Super strobe doesn’t have the necessary sync port to make use of these. He popped the device open to try to figure out a way to trigger the device manually. The first idea was to use the test button to fire the device. Thanks to lag, it didn’t work for anything under 1/20th. The solution was to go straight for the optical trigger. [Adrian] has posted some teardown pictures that will help you determine the appropriate solder points for your own mod. The only bit that’s left is adding a 3.5mm mono headphone jack as a sync port. He also has a post on modifying the flash for greater head movement.

A Very Power Suit Halloween


We spent our Halloween dressed as an irate traveler as we flew cross country, but it looks like a lot of people were having much more fun. [flaming_pele!]’s Aliens power loader is one of the best costumes we’ve seen yet. He built it by referencing a 1/12th model kit and a lot of photos. The final costume is about 80% full size which gets it under their 8 foot ceilings. There’s a video of the suit embedded below. Our love of power suits was documented fairly well in our roundup post this summer. Make found two other related costumes: a Star Wars AT-ST and a generic mech constructed from packing foam. Did any of you dress as something truly nerdy for Halloween? Continue reading “A Very Power Suit Halloween”

ShmooCon Registration Opens

November 1st means that registration for ShmooCon 2009 has opened. The DC hacker convention is entering the fifth year. They’re releasing the tickets in blocks; after today’s are gone the next won’t be available till December 1st. Today is also the closing of first round consideration for their call for papers, but you still have another month before the final deadline.

We’ve always enjoyed our time at ShmooCon. In 2008 we saw talks on cracking GSM encryption and recovering data from SSDs.

Asymmetric Gear Heart Sculpture

[youtube=http://www.youtube.com/watch?v=70dKZjP4NOo]

Here’s a video of a mindbending piece of papercraft engineering. We’d love to see a 3D model for this heart to at least have a starting point when designing our own. The creator’s site is in Japanese though, so it’s hard to glean any insight into his process. Embedded below is a similar cube version. Continue reading “Asymmetric Gear Heart Sculpture”

Aspire One 3G Hack

[tnkgrl] is back with part three of her Acer Aspire One hacking. This time she’s adding in 3G. You may look at the picture the above and think, “Cake. She just plugged the card in”. No, the Acer doesn’t ship with the mini-PCIe slot or the SIM card holder. First you have to solder a right angle mini-PCIe connector to the board pads and bridge two others to provide power. The SIM holder was another problem. She wasn’t able to find a pin compatible one. The one she installed is mounted to a riser so she could change the wiring order (let her know if you can find the correct part). This mod definitely requires some good soldering skills and she warns that even she managed to destroy a SIM in the process.

The Dell Mini 9 is another netbook that doesn’t have the appropriate connectors soldered on board, but JKK has a work-around. You need a 3G modem that has the SIM card on board. You plug it into the WiFi slot after taping over a few pins and then use a USB WiFi card instead.

Flaming Lips Guitar Hero Mod

Here’s a fun little suprise that showed up in a recent Flaming Lips interview. Frontman Wayne Coyne built this custom guitar rig out of a double-necked Epiphone. It has a neck from a Guitar Hero controller, which triggers a built in KORG Kaossilator touchpad synthesizer. Checkout the video interview at around 1:55 for a demo. He went with the Guitar Hero controller because he feels that it’s replacing regular guitars in childrens’ perception of how guitar is played.

[via Joystiq]