GPS Lap Timer From Secondhand Parts

July 5, 2011 by Mike Nathan 3 Comments

gps_racing_lap_timer

Hackaday forum member [nes] was training for an endurance race, and rather than having someone verbally call out his lap times, he wanted something he could keep in-vehicle to help keep track of his performance. With the race budget running dry, he and his teammates needed something cheap, if not free, to get the job done.

He scored a “broken” GPS receiver on eBay for a measly £4 and found that the receiver worked, but corrupted software prevented the unit from mapping routes. Since he didn’t require routing functions to keep track of his lap times, he splayed the GPS receiver open and started hunting around for a serial bit stream. He found what he was looking for after a bit of probing and hooked it up to his computer to see if the data contained NMEA sentences.

He cut the receiver down to the necessary parts and then started work on the lap timer itself. The timer uses an ATMega32 to run the show, displaying relevant time and location information on an LCD panel he scavenged from the trash bin.

He admits that the wiring is a bit questionable, but says that after about seven hours of rough use, everything is still intact and working great.

Electronics Tutorial Two-fer: Soldering Skills And Wires

July 5, 2011 by Mike Nathan 27 Comments

electronics_tutorial_twofer_soldering_skills_and_wires

There is a plethora of electronics tutorials scattered about online. Sometimes it can be hard to separate the good ones from the bad, and the enlightening from the misinformed. We recently came across a pair that we found helpful, and thought they would appeal to anyone starting off in electronics.

In this video tutorial, [Dave Jones] at the EEVblog covers soldering, detailing good practices and common mistakes to avoid when working with through-hole components. As the second video in a series he picks up where part one left off, excitedly demonstrating the ins and outs of good soldering skills.

Hackaday reader [grenadier] is working on a series of beginner’s electronics tutorials, and this week’s entry covers wiring. He discusses wire types, gauges, and even provides a nifty self-computing chart that calculates power loss based on the length and gauge of the selected wire. Before wrapping things up, he briefly touches on fuses and the pitfalls of choosing wire that’s not up to the task at hand. While you’re over there looking over his tutorial, be sure to check out the Junkbox, there’s plenty of awesome stuff to be had!

Take To The Skies With This Flying RC Superhero

July 5, 2011 by Mike Nathan 42 Comments

It’s a bird! It’s a plane! It’s….

A flying RC super hero?

No, you’re not imagining things. Maker [Greg Tanous] loves both RC airplanes and super heroes, so he thought it would be awesome to combine his two loves into one spectacular toy. The RCSuperhero comes in two flavors, measuring 75″ and 57″ tall. The larger plane can be purchased as a kit, but the smaller unit is only available in plan form.

The flying superhero weighs in at just about three pounds, and is constructed from foam, carbon fiber, and various other lightweight materials. When using the recommended motor, the RCSuperhero can be launched from a standing position, doing away with the need for runways. The craft looks to be just as maneuverable as any regular RC airplane, making it easy for any seasoned pilot to pick up the controls and get started.

RC planes are pretty cool, but we’ve got to admit that the idea of a vertically launching, flying superhero sounds like a lot of fun!

Stick around to see [Greg’s] RCSuperhero in action.

Continue reading “Take To The Skies With This Flying RC Superhero” →

Kinect-controlled Quadrotor

July 5, 2011 by Mike Nathan 10 Comments

kinect_quadrotor_control

The team over at the Flying Machine Arena has been busy combining two of our favorite toys – quadrotors and Kinect.

Like many other hacks, they are using Kinect to monitor their joint positions, mapping a handful of actions to the operator’s movements. Once the quadrotor is aloft, it can be directed around the room using the operator’s right hand. The gesture recognition system responds almost instantly, guiding the vehicle in all directions with ease. When the user’s left hand is raised, the quadrotor does a mid-air flip and awaits its next command, while a quick clap of the hands brings the machine to rest on the ground.

For the protection of anyone testing out the system, overhead motion tracking cameras are used to keep track of the Kinect’s position, creating an invisible midair barrier through which the quadrotor is not allowed to pass.

If you have a minute, check out the video below – controlling quadrotors looks way more fun than any Kinect game we’ve come across.

Continue reading “Kinect-controlled Quadrotor” →

Fog Horn Built From Plumbing Supplies

July 4, 2011 by Mike Nathan 9 Comments

diy_plumping_supply_fog_horn

Instructables user [rog8811] was looking to build a fog horn that resembled hand-pumped units found on small ships in the early to mid 1900s. His budget was a bit limited, so he set off to build the cheapest replica possible.

While the original horns were likely constructed from steel, copper and wood, he opted to use cheap plumbing components he found at his local hardware store. He used a simple double-acting air pump to drive the horn, combining it with a slightly modified bottle trap. The trap was shortened, and a diaphragm cut from a dish washing glove was added to generate sound.

He added a few more pieces of PVC piping to enhance the output, giving him the results you see in the video below. He says that the best thing about his design is the ability to easily tweak the pitch and volume of the horn by simply adding different drain components to the pump.

Watch out vuvuzela, there’s a new cheap and annoying horn on the block!

Continue reading “Fog Horn Built From Plumbing Supplies” →

Alarm Clock Forces You To Play Tetris To Prove You Are Awake

July 4, 2011 by Mike Nathan 28 Comments

Oversleeping sucks, but we’ve all been there. Whether its a matter of hitting the snooze button a dozen times too many, or turning off the alarm and drifting back to sleep – sooner or later, you are going to wake up late.

Instructables user [nolte919] has overslept a time or two in his life, and he set out to design a clock that would make it nearly impossible to wake up late. His clock is Arduino-based and shares many features with off the shelf models including multiple alarms, a backup battery, and snooze features. His alarm however goes one step further and ensures you are fully awake each morning.

If you hit the user-defined snooze limit, the alarm sounds and will not turn off until you have cleared 4 lines in Tetris. That’s right, you have to prove to the clock that you are awake and coherent before it will shut off. Technically you can silence the alarm for a 30 second period so you can focus on Tetris, but that’s all the break you get.

It really is a novel way of ensuring you are awake in the morning, and heck, how bad can the day be when you start off by playing video games for a few minutes?

Stick around to see a quick video of his Tetris alarm clock in action.

Continue reading “Alarm Clock Forces You To Play Tetris To Prove You Are Awake” →

Bottle Rocket POV Video

July 3, 2011 by Mike Nathan 24 Comments

pov_fireworks_video

It’s a holiday weekend, and much like you, we’re taking a bit of time to relax and kick back a few drinks while we mingle with friends and family. Obviously, one of the bigger events this weekend plays host to is the fireworks show put on by your city or your drunken neighbors.

Roman candle wars aside, have you ever wondered what the 4th of July looked like from the fireworks’ point of view? We did, and so did [Jeremiah Warren], who put together an awesome video showing what really happens after you light the fuse and run away like a little girl.

The dizzying video was shot using a pair of key chain cameras that he strapped directly to the rockets before launching. It’s pretty entertaining, so be sure to check it out if you have a few minutes to spare.

This probably doesn’t quite fit the criteria to be considered a hack, but with explosions and the crazy point of view video, we had to pass it along.

Continue reading “Bottle Rocket POV Video” →