Thor’s Hammer Build Recognizes Its Master’s Hand

electromagnetic-thors-hammerOnly those who have completely insulated themselves from modern pop culture will miss the meaning of a Mjolnir build. It is, of course, the mythical hammer wielded by Thor, and only Thor. It’s a question of being worthy; a question solved perfectly by this electromagnetic Mjolnir build.

Using an electromagnet is smart, right? Just plunk the thing down on something metal (that is itself super-heavy or well-anchored) and nobody will be able to pick it up. It starts to get more interesting when you add a fingerprint reader, allowing only Mjolnir’s Master to retrieve it from atop a manhole cover.

But for us the real genius in the build is that the hammer isn’t burning power from the four 12V batteries most of the time. All of the people in the video below could have picked up the hammer had they first nudged it off the metal plate with their foot. The build uses a capacitive touch-sensor to enable and disable the microwave over transformer used as the electromagnet. An engineering trick like this really separates the gods from the posers.

We hate to admit it, but this is probably a cooler build than the Telsa-Coil powered Mjolin that [Caleb] built a few years back. Still, his held up as the best for many years, and if you’re going to be displaced this really is a build worthy of the new title: coolest Mjolnir hack.

Continue reading “Thor’s Hammer Build Recognizes Its Master’s Hand”

Flying High With Zynq

[Aerotenna] recently announced the first successful flight of an unmanned air vehicle (UAV) powered by a Xilinx Zynq processor running ArduPilot. The Zynq is a dual ARM processor with an onboard FPGA that can offload the processor or provide custom I/O devices. They plan to release their code to their OcPoC (Octagonal Pilot on a Chip) project, an open source initiative that partners with Dronecode, an open source UAV platform.

Continue reading “Flying High With Zynq”

Hacking When It Counts: Much Space Station Hacking Saved Skylab

Thanks to the seminal work of Howard and Hanks et al, the world is intimately familiar with the story behind perhaps the most epic hack of all time, the saving of the crippled Apollo 13 mission. But Apollo 13 is far from the only story of heroic space hacks. From the repairs to fix the blinded Hubble Space Telescope to the dodgy cooling system and other fixes on the International Space Station, both manned and unmanned spaceflight can be looked at as a series of hacks and repairs.

Long before the ISS, though, America’s first manned space station, Skylab, very nearly never came to fruition. Damaged during launch and crippled both electrically and thermally, the entire program was almost scrapped before the first crew ever arrived. This is the story of how Skylab came to be, how a team came together to fix a series of problems, and how Skylab went on to success despite having the deck stacked against her from the start.

Continue reading “Hacking When It Counts: Much Space Station Hacking Saved Skylab”

Graphene Grown On Semiconductors Big Step Toward Manufacturability

No modern technology has been met with more hype than graphene. These single-layer sheets of carbon promise everything from incredibly efficient power grids to more advanced electronics to literal elevators to space. Until now, though, researchers have yet to produce graphene sheets or ribbons in a reliable way. Researchers at the University of Wisconsin at Madison and the US Department of Energy Argonne National Laboratory have done just that, growing graphene nanoribbons on the surface of a germanium crystal.

By using a germanium crystal as a substrate, the researchers have found a directionality to the way these graphene nanoribbons form. This has been a problem for researchers experimenting with graphene microelectronics in the past; labs experimenting with making transistors out of carbon nanotubes found growth is highly unpredictable. The controlled growth of graphene nanoribbons opens the door to more precise fabrication, something that is necessary for microelectronics fabrication.

Synthesis of nanoribbons this small have not been possible before. Because germanium itself is a semiconductor – and was used for the first transistor – this discovery may pave the way for the creation of graphene-based circuits grown using the same semiconductor fabrication processes used today.

Kids Explore Engineering With Cartoon Tech Build

“To the Tortuga!” my husband and I heard the announcement from the backyard. Our two boys, Ben (7) and Miles (3), had become pleasantly obsessed with the coolest brothers in nature – the Kratt Brothers. From the moment that these two energetic animal-loving brothers were discovered by our kids, they’ve been huge fans. Our house has been transported to the Sonora Desert where we saved a Gila Monster, then to the Australian Outback to learn about the Thorny Devil. We even went to swing with the Spider Monkeys in South America and then back to the good ‘ole U.S. of A to harness the speed of the Roadrunner – since we are, after all, a family of runners!

creaturepod-from-show
Creaturepod [Source: WildKratts Wiki]
Our boys have been the Grand Brothers for months and there are no signs of it letting up. At the end of summer, I decided to reward the kids with a Creaturepod, a plastic toy meant to look like the fictional walkie talkie of the same name used on PBS Kids’ Wild Kratts program. They loved it, but soon found that it didn’t do anything on its own. They both have wild imaginations and like to bring to life most of their play, but the toy just wasn’t doing it for them. Being that Chris and Martin Kratt are brothers in real life, and Ben and Miles Grand are brothers in real life, Ben thought it would only be right to have “real life” Creaturepods. Real walkie talkies that he could use to communicate with his friends and have Wild Kratts adventures. This natural interest provided an opportunity to make learning, designing, and building a source of fun for the boys. It is an amazing way to teach that you can change the world around you by having an idea, making a plan, and gathering everyone with the skills needed to complete the project.

Continue reading “Kids Explore Engineering With Cartoon Tech Build”

Mr. Trash Wheel Cleans Baltimore’s Harbor

Quite frankly we’re rather surprised we haven’t heard of Mr. Trash Wheel before. It’s a community project by the Baltimore Waterfront’s Healthy Harbor program where they are trying to make the harbor both swimmable and fishable by 2020. One of the coolest projects that resonates with us is Mr. Trash Wheel — a waterwheel-powered-trash-collecting-conveyor-belt. Say that 10 times fast!

It was built in early 2014, and according to the latest data it has removed a whopping 160 tons of garbage from the waterway already. Floating buoy-nets direct the garbage floating on top of the water into a narrow passage where the conveyor belt powered by a waterwheel slowly picks up the trash, and then deposits it into a large dumpster on a barge.

In fact, it’s even saved a python from the water too!

Continue reading “Mr. Trash Wheel Cleans Baltimore’s Harbor”

Hand-Cranked Cyclotron

Okay, not actually a cyclotron… but this ball cyclotron is a good model for what a cyclotron does and the concepts behind it feel kooky and magical. A pair of Ping Pong balls scream around a glass bowl thanks the repulsive forces of static electricity.

It’s no surprise that this comes from Rimstar, a source we’ve grown to equate with enthralling home lab experiments like the Ion Wind powered Star Trek Enterprise. Those following closely will know that most of [Steven Dufresne’s] experiments involve high voltage and this one is no different. The same Wimshurst Machine he used in the Tea Laser demo is brought in again for this one.

A glass bowl is used for its shape and properties as an insulator. A set of electrodes are added in the form of aluminum strips. These are given opposite charges using the Wimshurst machine. Ping Pong balls coated in conductive paint are light enough to be moved by the static fields, and a good crank gets them travelling in a very fast circuit around the bowl.

When you move a crank the thought of being connected to something with a chain pops into your mind. This feels very much the same, but there is no intuitive connection between the movement of the balls and your hand on the crank. Anyone need a prop for their Halloween party?

If you don’t want to buy or build a Wimshurst machine you can use a Van De Graaff generator. Can anyone suggest other HV sources that would work well here?

Continue reading “Hand-Cranked Cyclotron”