Reverse Engineering “The Seven Words (and More) You Can’t Say On TV”

November 21, 2022 by 24 Comments

For as visionary as he was, [George Carlin] vastly underestimated the situation with his classic “Seven Words You Can’t Say on TV” bit. At least judging by [Ben Eater]’s reverse engineering of the “TVGuardian Foul Language Filter” device, it seems like the actual number is at least 20 times that.

To begin at the beginning, a couple of weeks ago [Alec] over at everyone’s favorite nerd hangout Technology Connections did a video on the TVGuardian, a device that attempted to clean up the language of live TV and recorded programming. Go watch that video for the details, but for a brief summary, TVGuardian worked by scanning the closed caption text for naughty words and phrases, muted the audio when something suggestive was found in a lookup table, and inserted a closed caption substitute for the offensive content. In his video, [Alec] pined for a way to look at the list of verboten words, and [Ben] accepted the challenge.

The naughty word list ended up living on a 93LC86 serial EEPROM, which [Ben] removed from his TVGuardian for further exploration. Rather than just plug it into a programmer and dumping the contents, he decided to roll his own decoder with an Arduino, because that’s more fun. And can we just point out our ongoing amazement that [Ben] is able to make watching someone else code interesting?

The resulting NSFW word list is titillating, of course, and the video would be plenty satisfying if that’s where it ended. But [Ben] went further and figured out how the list is organized, how the dirty-to-clean substitutions are made, and even how certain words are whitelisted. That last bit resulted in the revelation that Hollywood legend [Dick Van Dyke] gets a special whitelisting, lest his name becomes sanitized to a hilarious [Jerk Van Gay].

Hats off to [Alec] for inspiring [Ben]’s fascinating reverse engineering effort here.

Continue reading “Reverse Engineering “The Seven Words (and More) You Can’t Say On TV”” →

This Standalone Camera Gets The Picture Through With SSTV

November 20, 2022 by 12 Comments

These days, sending a picture to someone else is as simple as pulling out your smartphone and sending it by email or text message. It’s so simple a child can do it, but that simple user experience masks a huge amount of complexity, from the compression algorithms in the phones to the huge amount of distributed infrastructure needed to connect them together. As wonderful and enabling as all that infrastructure can be, sometimes it’s just too much for the job.

That seems to have been the case for [Dzl TheEvilGenius], who just wanted to send a low-resolution image from a remote location. It turns out that hams solved that problem about 70 years ago with slow-scan television, or SSTV. While most of the world was settling down in front of “I Love Lucy” on the regular tube, amateur radio operators were figuring out how to use their equipment to send pictures around the world. But where hams of yore had to throw a considerable amount of gear at the problem, [Dzl] just used an ESP-32 with a camera and some custom code to process the image. The output from one of the MCU’s GPIO pins is a PWM audio signal which can be fed directly into the microphone input of a cheap portable transceiver.

To decode the signal, [Dzl] used one of the many SSTV programs available. There’s no mention of the receiver, although it could be pretty much anything from another Baofeng to an SDR dongle. The code is available in the article, as is an audio file of an encoded image, if you just want to play around with the receiving and decoding side of the equation.

We could see something like this working for a remote security camera, or even for scouting hunting spots. If you want to replicate this, remember that you’ll need a license if you want to transmit on the ham bands — relax, it’s easy.

TV Repair By Mail

November 17, 2022 by 49 Comments

I don’t think there was ever a correspondence school called the “Close Cover Before Striking School” but since book matches — which used to be a thing when most people smoked — always had that text on them anyway perhaps there should have been. There was a time when electronic magazines, billboards, and even book matches were constantly bombarding us with ads to have a career in electronics. Or computers. Or TV repair. So while we think of distance learning as a new idea, really it is just the evolution of these old correspondence schools which date back quite some time.

How far exactly? Hard to say. There’s evidence of some distance learning going back as far as 1728. In 1837, there was a correspondence course to learn shorthand. By 1858, the University of London started its external program for correspondence work and the University of Chicago had a home study division in 1892.  Radio was an early choice of topic, too. In the United States, the United Wireless Telegraph company started a training school — later the Marconi Institute — in 1909. However, it is doubtful that there was any correspondence training going on there until much later.

Continue reading “TV Repair By Mail” →

A Single Board Computer From A TV

November 14, 2022 by 38 Comments

It is an annoyance for some members of our community, that it has become almost impossible to buy a TV that’s not a so-called “smart” TV. These units contain a computer as well as the display, and it boots into a locked-down OS with a user interface and a load of streaming apps. Can anything be done with them other than what their manufacturers intended? [Nina Kalinina] has managed it, taking the mainboard from a discarded LCD TV and liberating the ARM Linux board within.

On the board are all the inputs you’d expect from a TV, along with Ethernet, and a couple of extra USB ports hidden in the WiFi interface. There’s a UART available on the SCART connector, and accessing the U-boot menu is achieved by the unusual means of sending a character to the infrared port using a Palm Pilot. Surprisingly the device tree in the Flash was editable, so with the Linux OS accessed, the board was revealed as having a dual-core Novatek SoC.

This is reminiscent of the days when the new hotness was dragging a Linux box out of a home router, and just as those were quickly eclipsed by inexpensive boards such as the Raspberry Pi, so might these TV boards meet the same fate. If, however, they can be made to drive a screen with something more useful than the TV interface then that might change, as who wouldn’t want to make an old smart TV a bit more useful?

a comparison of the before and after

Compensating For Your TVs Backlight

October 10, 2022 by 8 Comments

[Pekka Väänänen] has a Panasonic TV with a broken backlight that creates an uneven pink/green color. While it isn’t a huge deal for most films, black-and-white films tend to show the most effect. So, by modeling the distortion as a function, [Pekka] set out to find an inverse function that corrects the distortion before it gets to the TV.

However, the backlight doesn’t emit enough light for some colors, which means the blue and green channels need to be dimmed. As mentioned earlier, the distortion isn’t even, so the distortion needs to be captured and then calculated.

He took a few pictures with his phone, corrected the perspective, and applied a blur. The camera also has some distortion but works as a first approximation, but that isn’t something he covered here. Next, he set up a webcam and pointed it at the TV, trying to find good gain and offset values with a bit of Python.

 

Now it just becomes a problem of minimizing the per-pixel difference. Ultimately he just went for a random approach rather than an annealing or hill-climbing approach. Now that he had a function to apply, it was just a matter of adding a custom shader to his video player, which includes a live shader editor. He had to hack in support for an external texture, but he is kind enough to include the shader code and the patch in the article.

The result is excellent, and it’s a great use for an old TV. But perhaps, in some cases, it might be worth replacing the backlight entirely.

Converting An Old ATV To Electric Drive

August 31, 2022 by 13 Comments

[RCLifeOn] happened upon an old petrol-powered ATV that had seen better days. He decided it was the perfect candidate for a conversion to electric drive.

First up, the chassis was stripped back and cleaned, before being given a fresh coat of paint. It then got fresh valve stems for the tires and was ready for its drivetrain conversion.

The motor of choice is a brushless type, rated for 42 kW at 120 V. [RCLifeOn] doesn’t have batteries capable of maxing out those specs, yet, but carried on with the build. The motor was mounted on the chassis, and a 3D printed hub was installed to get the sprocket on the end of the motor.

A stress test uphill killed the speed controller. This was not unexpected, as it was a cheap unit severely undersized for the application.

The first drive was rough and ready, as the speed controller wasn’t sensored, the gearing wasn’t quite right, and the chain wasn’t very tight. However, it did successfully make it around the grass, slowly. Further improvements then included a water cooling circuit for the speed controller and the addition of a battery compartment. That wasn’t enough to stop the speed controller bursting into flames during a difficult uphill climb, though.

Fundamentally, though, the project shows promise. Bigger batteries, a sensored speed controller, and appropriate gearing should make it a quick beast. 42 kW of power is a good amount for a light ATV, plus there’s the benefit of instant-on torque from an electric motor.

We’ve seen [RCLifeOn] tackle some high-powered electric builds before, like his impressive powered surfboard.  With the right parts, we’re sure he’ll have this thing ripping about at pace before long!

Continue reading “Converting An Old ATV To Electric Drive” →

TVout Library Brings Cardboard Arcade To Life

August 12, 2022 by 12 Comments

Recycling old CRTs is a true Hackaday tradition, and [Rob’s] mini arcade is sure to grab your attention.

First of all, you’ll probably appreciate [Rob] circumventing the supply shortage by getting all his components from recycled material. That’s probably the only way to get anything these days. He salvaged a small CRT from an old-school video intercom system and snagged the buttons, speakers, and switches from other unused devices laying around. Not all is lost, however, as [Rob] was able to purchase an Arduino Nano and a few resistors online. So maybe things are turning around in that category, who knows?

You’ll probably also appreciate how remarkably simple this hack is. No need for a Raspberry Pi as your standard 8-bit microcontroller will do the trick. And, fortunately, [Rob] found a nice library to help him generate the composite video signal, doing most of the work for him. All that was left to do was to build the arcade cabinet. Recreating the classic design was a pretty easy step, but you might opt for something a little nicer than cardboard though. But, hey, if it does the trick, then why not?

Cool project, [Rob]! We’re definitely happy to add this project to our retro collection here at Hackaday.

Continue reading “TVout Library Brings Cardboard Arcade To Life” →