Another Take On Roasting Those Beans

[Andrew] takes his coffee very seriously and like any hardcore aficionado he wanted to do the roasting himself. The coffee roaster design uses a heat gun for the roasting and sources an old bread maker as a vessel. As part of the automatic bread making process there’s a little agitator arm inside which keeps the beans moving while the heat is applied. A computer controls the heat gun, adjust with feedback from a temperature sensor. We had a bit of a laugh reading about melted temperature sensors, but design flaws aside this computer interface allows rather strict control of the roasting profile.

Reader [Youseff] tipped us off about this after seeing the Popcorn Coffee Bean roaster from last week.

Salty LEDs

[Davross] pulled off an LED lighting build for his coral aquarium. The module consists of a wooden body holding a 3×16 grid of LEDs. They are mounted to heat sinks which themselves have cooling fans to help keep those puppiesĀ from melting. The system is controlled by an Arduino which allows for almost limitless lighting options. The photo above shows the LEDs running at 50%. He’s also taken some photos of the tank in “moonlight” mode. It’s a long and detailed forum thread but you can skip to some nice photos of the coral under the lights or details about the build.

[Thanks Passmadd]

And We’re Back

Several of you were rather angry with us yesterday for our competition. Those not in the loop, our email competition@hackaday.com was not correctly configured and no body could send in their entries!

But have no fear, we have fixed the problem and now you can send in your guesses. To remedy the situation we have decided to extend the competition until 10AM PST Monday the 1st of February, 2010. We will announce the winner (so long as nothing else fails) Monday afternoon. So what are you doing here still reading? Time is wasting – go win some tickets!

Ask A Winner Updates: Answers

Not too long ago we asked our readers what they would like to hear about from the PUSH N900 winners and their hacks. We got some silly questions, and some serious, we asked both and now the PUSH teams have answered.

Todays team interview is KAPing with the N900. They’re N900 hack is the high flying Kite Aerial Photography. Check out what they have to say after the break. And be sure to keep up on their blog – they’ve released their first test video just a few days ago. Continue reading “Ask A Winner Updates: Answers”

Contest: Win Push Showcase Tickets

Who is ready to win some tickets to the PUSH N900 Showcase?

The showcase is an event where all 5 teams from the Push N900 competition are going meet up in London and present their N900 hacks. Including N900s that fly, skate, Etch a Sketch(TM), and more. We also hear there is going to be a poll-dancing robot thanks to [Giles Walker]. We were given tickets to the event, and decided to pass them along to our readers.

How can you gain a pair of tickets to this magical showcase? Check out after the break – hope you know a thing or two about resistors.

Continue reading “Contest: Win Push Showcase Tickets”

Happy Meal Toy Scavenging

We’re sometimes shocked at the electronics included in ‘disposable’ items. For some reason (our tech inclinations?) we’ve been getting those audio greeting cards from relatives and it kind of kills us to see the PCB, batteries, and speaker in what would have otherwise been a fully recyclable card. Now we’ve got several sets of those guts waiting around for our next project.

[David Cook] cracked open another disposable item, an Avatar action figure that came as a Happy Meal prize. What he found inside will actually be useful. There’s a battery holder for the three coin-cell batteries, A blue LED (for those blue LED hacks our commenters are so fond of), and a piezo speaker. There are some other discrete components that may be of use to you but the first three are certainly a boon for those that areĀ  junk scavengers like us.

Has anyone else found some goodies inside these types of free toys? We’d love to hear about them in the comments. But for now we’re just glad to see the first good thing to come out of that annoying market saturation that accompanied the movie release.

Incidentally, [David’s] h-bridge writeup is our go-to reference for building quick motor controllers from parts on hand, or that can be purchased locally.

[Thanks Gron]

Drill-powered Go Cart

Here we have a toy car modified to use a drill as the powertrain. [Hans] has thrown a 12v 4.5 amp battery in to power the motor and it tops out around 9 miles per hour. This is similar in concept to the trash-based go cart from last week but this time there’s video. He’s built a couple of these and there’s footage of both after the break. Our favorite part is from the first video when dad chuckles with glee from behind the camera as son whips around the neighborhood on the mean-sounding machine.

Continue reading “Drill-powered Go Cart”