Music Visualizer (oscilloscope)

July 29, 2009 by Steve Watkins 21 Comments

musicscopetv

The Music visualizer is actually a second build based on an earlier design[Thanks Roger]. The build was influenced by Zyra’s How to make an oscilloscope out of a television. The hack is quite simple, patch the output of an amplifier into the vertical deflection coils of the CRT. This is a good use for that old TV you may have laying around but don’t want to recycle it just yet. While on the subject we had covered the Mac SE/30 audio visualizer in 2006. For those looking for something a little more hard core, here is a bit about Homemade cathode ray tubes.

Rotary DECT Phone

July 28, 2009 by Caleb Kraft 18 Comments

phones

[Al] sent us over to his Rotary DECT phone project, and we think its pretty cool. He’s attending Hacking At Random, and as usual, there will be a DECT network there. Rather than having a normal DECT handset like everyone else, [Al] wanted something a little homier. He chose to combine the guts of the DECT handset into an old rotary phone. He had to use an Arduino to convert the rotary output to someting the DECT handset could use. There’s plenty more information as well as some source code on the project page.

Sewer Clog Alert System

July 27, 2009 by Zach Banks 34 Comments

xbee

[miketysklar] noticed that a local business was having trouble with their sewage lines. People kept flushing tampons down toilets and it ended up clogging the pump. They had already installed a set of lights and horns to go off when it clogged, but they were hoping for SMS capability so they would know wherever they were. The new system piggybacks off the flashing lights by powering an XBee when they are activated. The signal it sends is recieved by another XBee attached to a computer running a python script. The script then sends a SMS via email to the poor fellow who has to fix it.

Related: Wireless Bootloading

Doorway Subwoofer

July 26, 2009 by Eliot 26 Comments

doorway

We’ve seen some crazy speaker builds in the past (massive folded horns for example). [DiscoJones] wanted to build a set of speakers that could reach very low frequencies and be very efficient. Instead of constructing a large box, he built a baffle that could be placed in a doorway and use the blocked off room as an enclosure. It has eight 12inch subwoofers, eight midrange drivers, and four tweeters. The speakers are fairly cheap and he built a simple crossover to help them work a little better together. The goal was always deep bass though, so don’t expect very high fidelity from a setup like this.

Pet-squirting Waterwall

July 24, 2009 by Zach Banks 8 Comments

waterwall

Sometimes, pets need to be trained to stay away from certain things. Over at sump.org, his cats needed to be kept out of his room. He used their natural fear of water by creating the waterwall, a motion-sensing device that sprays water. The project is incredibly simple and uses very few components. It is based around an IR intrusion detector and a windshield washer pump. Although that worked well enough, he also hooked it up to his computer via the parallel port so that he could take pictures as the cats (or people) are sprayed. Although the project is old, it shows how few components are really needed to achieve this kind of behavior.

Related: Motion detecting cat toy

[thanks todd]

Greenhouse Guard

July 24, 2009 by Zach Banks 15 Comments

pid

[Seth King] sent in his latest hack where he used an Arduino to regulate various aspects of a greenhouse. He has sensors for soil and air temperature as well as light and moisture. He built a custom circuit that uses relays to power fans, lights, and heaters. Using timers and the sensor data, the devices can be triggered to create the perfect environment for sprouts. He hopes to make the whole thing wireless by integrating XBees, but for now he ran a USB cord to his computer.

Related: Automatic grow light

Home Automation Via Twitter

July 19, 2009 by Caleb Kraft 25 Comments

[youtube=http://www.youtube.com/watch?v=PVm1VKB43ww]

We’ve seen tons of stuff hooked up to send updates to twitter when something happens. That’s what we expected when we first read this tip from [Matt]. We were pleasantly surprised to see he’s actually doing the opposite. He has rigged several items to an IoBridge module and he can control them by sending tweets to his account. In the video you can see him sound a buzzer and change a display on an LCD. Its nice to see twitter being used as part of the control as opposed to updating us every time someone flushes.